[dpdk-dev] [PATCH v4] net/ixgbe: fix flow ctrl mode setting

Ye Xiaolong xiaolong.ye at intel.com
Wed Feb 19 16:27:50 CET 2020


On 02/19, Konieczny, TomaszX wrote:
>>-----Original Message-----
>>From: dev <dev-bounces at dpdk.org> On Behalf Of Ye Xiaolong
>>Sent: 19 February 2020 08:06
>>To: Sun, GuinanX <guinanx.sun at intel.com>
>>Cc: dev at dpdk.org; Lu, Wenzhuo <wenzhuo.lu at intel.com>; Yang, Qiming
>><qiming.yang at intel.com>; Zhang, Qi Z <qi.z.zhang at intel.com>; stable at dpdk.org
>>Subject: Re: [dpdk-dev] [PATCH v4] net/ixgbe: fix flow ctrl mode setting
>>
>>On 02/18, Guinan Sun wrote:
>>>When the port starts, the hw register is reset first, and then the
>>>required parameters are set again.
>>>If the parameters to be used are not set after resetting the register,
>>>a read register error will occur. This patch is used to fix the problem.
>>>
>>>Fixes: af75078fece3 ("first public release")
>>>Cc: stable at dpdk.org
>>>
>>>Signed-off-by: Guinan Sun <guinanx.sun at intel.com>
>>>
>>
>>Reviewed-by: Xiaolong Ye <xiaolong.ye at intel.com>
>>
>>Applied to dpdk-next-net-intel, Thanks.
>
>This should be backported to 19.11 and 18.11

Sure, this patch has added "Cc: stable at dpdk.org", so the LTS maintainer would
backport them to 19.11 and 18.11.

Thanks,
Xiaolong

>
>Regards
>Tomasz Konieczny
>---------------------------------------------------------------------
>Intel Corporation (UK) Ltd.
>Co. Reg. #1134945
>Pipers Way, Swindon SN3 1RJ
>


More information about the dev mailing list