[dpdk-dev] [PATCH] build: add combined libs

[Ruslan Babayev]

Hi Luca,

PkgConfig doesn't cover the case of static linking. See below:

$ pkg-config --libs libdpdk
-lrte_bpf -lrte_flow_classify -lrte_pipeline -lrte_table -lrte_port
-lrte_fib -lrte_ipsec -lrte_vhost -lrte_stack -lrte_security -lrte_sched
-lrte_reorder -lrte_rib -lrte_rcu -lrte_rawdev -lrte_pdump -lrte_power
-lrte_member -lrte_lpm -lrte_latencystats -lrte_kni -lrte_jobstats
-lrte_ip_frag -lrte_gso -lrte_gro -lrte_eventdev -lrte_efd
-lrte_distributor -lrte_cryptodev -lrte_compressdev -lrte_cfgfile
-lrte_bitratestats -lrte_bbdev -lrte_acl -lrte_timer -lrte_hash
-lrte_metrics -lrte_cmdline -lrte_pci -lrte_ethdev -lrte_meter -lrte_net
-lrte_mbuf -lrte_mempool -lrte_ring -lrte_eal -lrte_kvargs

And here's the combined libdpdk.a

GROUP ( librte_acl.a librte_bbdev.a librte_bitratestats.a librte_bpf.a
librte_bus_dpaa.a librte_bus_fslmc.a librte_bus_ifpga.a librte_bus_pci.a
librte_bus_vdev.a librte_bus_vmbus.a librte_cfgfile.a librte_cmdline.a
librte_common_cpt.a librte_common_dpaax.a librte_common_iavf.a
librte_common_octeontx2.a librte_common_octeontx.a librte_compressdev.a
librte_cryptodev.a librte_distributor.a librte_eal.a librte_efd.a
librte_ethdev.a librte_eventdev.a librte_fib.a librte_flow_classify.a
librte_gro.a librte_gso.a librte_hash.a librte_ip_frag.a librte_ipsec.a
librte_jobstats.a librte_kni.a librte_kvargs.a librte_latencystats.a
librte_lpm.a librte_mbuf.a librte_member.a librte_mempool.a
librte_mempool_bucket.a librte_mempool_dpaa2.a librte_mempool_dpaa.a
librte_mempool_octeontx2.a librte_mempool_octeontx.a librte_mempool_ring.a
librte_mempool_stack.a librte_meter.a librte_metrics.a librte_net.a
librte_pci.a librte_pdump.a librte_pipeline.a librte_pmd_aesni_gcm.a
librte_pmd_aesni_mb.a librte_pmd_af_packet.a librte_pmd_ark.a
librte_pmd_atlantic.a librte_pmd_avp.a librte_pmd_axgbe.a
librte_pmd_bbdev_fpga_lte_fec.a librte_pmd_bbdev_null.a
librte_pmd_bbdev_turbo_sw.a librte_pmd_bnxt.a librte_pmd_bond.a
librte_pmd_caam_jr.a librte_pmd_ccp.a librte_pmd_crypto_scheduler.a
librte_pmd_cxgbe.a librte_pmd_dpaa2.a librte_pmd_dpaa2_event.a
librte_pmd_dpaa2_sec.a librte_pmd_dpaa.a librte_pmd_dpaa_event.a
librte_pmd_dpaa_sec.a librte_pmd_dsw_event.a librte_pmd_e1000.a
librte_pmd_ena.a librte_pmd_enetc.a librte_pmd_enic.a librte_pmd_failsafe.a
librte_pmd_fm10k.a librte_pmd_hinic.a librte_pmd_hns3.a librte_pmd_i40e.a
librte_pmd_iavf.a librte_pmd_ice.a librte_pmd_ifc.a librte_pmd_ixgbe.a
librte_pmd_kasumi.a librte_pmd_kni.a librte_pmd_liquidio.a
librte_pmd_memif.a librte_pmd_netvsc.a librte_pmd_nfp.a librte_pmd_nitrox.a
librte_pmd_null.a librte_pmd_null_crypto.a librte_pmd_octeontx2.a
librte_pmd_octeontx2_crypto.a librte_pmd_octeontx2_event.a
librte_pmd_octeontx.a librte_pmd_octeontx_compress.a
librte_pmd_octeontx_crypto.a librte_pmd_octeontx_event.a
librte_pmd_opdl_event.a librte_pmd_openssl.a librte_pmd_pfe.a
librte_pmd_qat.a librte_pmd_qede.a librte_pmd_ring.a librte_pmd_sfc.a
librte_pmd_skeleton_event.a librte_pmd_snow3g.a librte_pmd_softnic.a
librte_pmd_sw_event.a librte_pmd_tap.a librte_pmd_thunderx.a
librte_pmd_vdev_netvsc.a librte_pmd_vhost.a librte_pmd_virtio.a
librte_pmd_virtio_crypto.a librte_pmd_vmxnet3.a librte_pmd_zuc.a
librte_port.a librte_power.a librte_rawdev.a librte_rawdev_dpaa2_cmdif.a
librte_rawdev_dpaa2_qdma.a librte_rawdev_ioat.a librte_rawdev_ntb.a
librte_rawdev_octeontx2_dma.a librte_rawdev_octeontx2_ep.a
librte_rawdev_skeleton.a librte_rcu.a librte_reorder.a librte_rib.a
librte_ring.a librte_sched.a librte_security.a librte_stack.a
librte_table.a librte_timer.a librte_vhost.a )

Combining the libs into a single libdpdk.a (including the PMDs) makes it
much simpler to statically link against.
How does pkg-config solve this?

Regards,
Ruslan

On Thu, Feb 20, 2020 at 2:13 AM Luca Boccassi <bluca at debian.org> wrote:

> On Wed, 2020-02-19 at 11:13 -0800, Ruslan Babayev wrote:
> > Add combined libdpdk.a and libdpdk.so libs for Meson similar to how
> > it's done for Make builds
> >
> > Signed-off-by: Ruslan Babayev <
> > ruslan at babayev.com
> > >
> > ---
> >  buildtools/group-libs.sh |  2 ++
> >  buildtools/meson.build   |  1 +
> >  meson.build              | 17 +++++++++++++++++
> >  3 files changed, 20 insertions(+)
> >  create mode 100755 buildtools/group-libs.sh
> >
> > diff --git a/buildtools/group-libs.sh b/buildtools/group-libs.sh
> > new file mode 100755
> > index 000000000..b6e4c1c35
> > --- /dev/null
> > +++ b/buildtools/group-libs.sh
> > @@ -0,0 +1,2 @@
> > +#!/bin/sh
> > +echo 'GROUP (' $(echo $* | xargs -n1 basename | sort | xargs) ')'
> > diff --git a/buildtools/meson.build b/buildtools/meson.build
> > index 9812917e5..eac8bc4ff 100644
> > --- a/buildtools/meson.build
> > +++ b/buildtools/meson.build
> > @@ -6,6 +6,7 @@ subdir('pmdinfogen')
> >  pkgconf = find_program('pkg-config', 'pkgconf', required: false)
> >  pmdinfo = find_program('gen-pmdinfo-cfile.sh')
> >  list_dir_globs = find_program('list-dir-globs.py')
> > +group_libs = find_program('group-libs.sh')
> >  check_experimental_syms = find_program('check-experimental-syms.sh')
> >  ldflags_ibverbs_static = find_program('options-ibverbs-static.sh')
> >
> > diff --git a/meson.build b/meson.build
> > index b7ae9c8d9..eb6974d35 100644
> > --- a/meson.build
> > +++ b/meson.build
> > @@ -61,6 +61,23 @@ configure_file(output: build_cfg,
> >               install_dir: join_paths(get_option('includedir'),
> >                               get_option('include_subdir_arch')))
> >
> > +
> > +custom_target('group_shared_libs',
> > +             input: dpdk_libraries,
> > +             output: 'libdpdk.so',
> > +             capture: true,
> > +             install: true,
> > +             install_dir: get_option('libdir'),
> > +             command: [group_libs, '@INPUT@'])
> > +
> > +custom_target('group_static_libs',
> > +             input: dpdk_static_libraries + dpdk_drivers,
> > +             output: 'libdpdk.a',
> > +             capture: true,
> > +             install: true,
> > +             install_dir: get_option('libdir'),
> > +             command: [group_libs, '@INPUT@'])
> > +
> >  # for static builds, include the drivers as libs and we need to
> > "whole-archive"
> >  # them.
> >  dpdk_drivers = ['-Wl,--whole-archive'] + dpdk_drivers + ['-Wl,--no-
> > whole-archive']
>
> Hi,
>
> As far as I'm aware all usage of the old hacky linker script can be
> replaced with pkg-config, and that's why it was left behind. Same for
> the static archive.
>
> Is there any use case that pkg-config doesn't cover?
>
> --
> Kind regards,
> Luca Boccassi
>