[dpdk-dev] [PATCH 2/2] net/mlx5: add IPv4/IPv6 DSCP rewrite action

[Suanming Mou]

Hi

> -----Original Message-----
> From: Matan Azrad <matan at mellanox.com>
> Sent: Monday, January 6, 2020 10:37 PM
> To: Suanming Mou <suanmingm at mellanox.com>; Shahaf Shuler
> <shahafs at mellanox.com>; Slava Ovsiienko <viacheslavo at mellanox.com>
> Cc: dev at dpdk.org; Ori Kam <orika at mellanox.com>;
> arybchenko at solarflare.com; ferruh.yigit at intel.com; Thomas Monjalon
> <thomas at monjalon.net>
> Subject: RE: [PATCH 2/2] net/mlx5: add IPv4/IPv6 DSCP rewrite action
> 
> Hi
> 
> From: Suanming Mou
> > This commit add the IPv4/IPv6 DSCP rewrite actions to the PMD code.
> >
> > Supported actions:
> > RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP
> > RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP
> >
> > Signed-off-by: Suanming Mou <suanmingm at mellanox.com>
> > ---
> >  drivers/net/mlx5/mlx5_flow.h    |   6 +-
> >  drivers/net/mlx5/mlx5_flow_dv.c | 184
> > ++++++++++++++++++++++++++++++++++++++++
> >  2 files changed, 189 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/net/mlx5/mlx5_flow.h
> > b/drivers/net/mlx5/mlx5_flow.h index 27d82ac..e42c98a 100644
> > --- a/drivers/net/mlx5/mlx5_flow.h
> > +++ b/drivers/net/mlx5/mlx5_flow.h
> > @@ -196,6 +196,8 @@ enum mlx5_feature_name {  #define
> > MLX5_FLOW_ACTION_MARK_EXT (1ull << 33)  #define
> > MLX5_FLOW_ACTION_SET_META (1ull << 34)  #define
> MLX5_FLOW_ACTION_METER
> > (1ull << 35)
> > +#define MLX5_FLOW_ACTION_SET_IPV4_DSCP (1ull << 36) #define
> > +MLX5_FLOW_ACTION_SET_IPV6_DSCP (1ull << 37)
> >
> >  #define MLX5_FLOW_FATE_ACTIONS \
> >  	(MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE | \ @@ -
> 232,7 +234,9
> > @@ enum mlx5_feature_name {
> >  				      MLX5_FLOW_ACTION_OF_SET_VLAN_VID
> > | \
> >  				      MLX5_FLOW_ACTION_SET_TAG | \
> >  				      MLX5_FLOW_ACTION_MARK_EXT | \
> > -				      MLX5_FLOW_ACTION_SET_META)
> > +				      MLX5_FLOW_ACTION_SET_META | \
> > +				      MLX5_FLOW_ACTION_SET_IPV4_DSCP | \
> > +				      MLX5_FLOW_ACTION_SET_IPV6_DSCP)
> 
> I don't think DSCP set is a reg feature... please check...
It does not belong to the mlx5_feature_name, it belongs to the MLX5_FLOW_MODIFY_HDR_ACTIONS macro.
I don't know why git put the feature_name here. : (
> 
> >  #define MLX5_FLOW_VLAN_ACTIONS
> > (MLX5_FLOW_ACTION_OF_POP_VLAN | \
> >  				MLX5_FLOW_ACTION_OF_PUSH_VLAN)
> > diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> > b/drivers/net/mlx5/mlx5_flow_dv.c index 4c16281..15fe726 100644
> > --- a/drivers/net/mlx5/mlx5_flow_dv.c
> > +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> > @@ -157,6 +157,7 @@ struct field_modify_info
> > modify_vlan_out_first_vid[] = {  };
> >
> >  struct field_modify_info modify_ipv4[] = {
> > +	{1,  1, MLX5_MODI_OUT_IP_DSCP},
> >  	{1,  8, MLX5_MODI_OUT_IPV4_TTL},
> >  	{4, 12, MLX5_MODI_OUT_SIPV4},
> >  	{4, 16, MLX5_MODI_OUT_DIPV4},
> > @@ -164,6 +165,7 @@ struct field_modify_info modify_ipv4[] = {  };
> >
> >  struct field_modify_info modify_ipv6[] = {
> > +	{1,  0, MLX5_MODI_OUT_IP_DSCP},
> >  	{1,  7, MLX5_MODI_OUT_IPV6_HOPLIMIT},
> >  	{4,  8, MLX5_MODI_OUT_SIPV6_127_96},
> >  	{4, 12, MLX5_MODI_OUT_SIPV6_95_64},
> > @@ -1191,6 +1193,82 @@ struct field_modify_info modify_tcp[] = {  }
> >
> >  /**
> > + * Convert modify-header set IPv4 DSCP action to DV specification.
> > + *
> > + * @param[in,out] resource
> > + *   Pointer to the modify-header resource.
> > + * @param[in] action
> > + *   Pointer to action specification.
> > + * @param[out] error
> > + *   Pointer to the error structure.
> > + *
> > + * @return
> > + *   0 on success, a negative errno value otherwise and rte_errno is set.
> > + */
> > +static int
> > +flow_dv_convert_action_modify_ipv4_dscp
> > +			(struct mlx5_flow_dv_modify_hdr_resource
> > *resource,
> > +			 const struct rte_flow_action *action,
> > +			 struct rte_flow_error *error)
> > +{
> > +	const struct rte_flow_action_set_dscp *conf =
> > +		(const struct rte_flow_action_set_dscp *)(action->conf);
> > +	struct rte_flow_item item = { .type = RTE_FLOW_ITEM_TYPE_IPV4 };
> > +	struct rte_flow_item_ipv4 ipv4;
> > +	struct rte_flow_item_ipv4 ipv4_mask;
> > +
> > +	memset(&ipv4, 0, sizeof(ipv4));
> > +	memset(&ipv4_mask, 0, sizeof(ipv4_mask));
> > +	ipv4.hdr.type_of_service = conf->dscp;
> > +	ipv4_mask.hdr.type_of_service = 0x3f;
> 
> Please use RTE_IPV4_HDR_DSCP_MASK.
OK.
> 
> > +	item.spec = &ipv4;
> > +	item.mask = &ipv4_mask;
> > +	return flow_dv_convert_modify_action(&item, modify_ipv4, NULL,
> > resource,
> > +					     MLX5_MODIFICATION_TYPE_SET,
> > error); }
> > +
> > +/**
> > + * Convert modify-header set IPv6 DSCP action to DV specification.
> > + *
> > + * @param[in,out] resource
> > + *   Pointer to the modify-header resource.
> > + * @param[in] action
> > + *   Pointer to action specification.
> > + * @param[out] error
> > + *   Pointer to the error structure.
> > + *
> > + * @return
> > + *   0 on success, a negative errno value otherwise and rte_errno is set.
> > + */
> > +static int
> > +flow_dv_convert_action_modify_ipv6_dscp
> > +			(struct mlx5_flow_dv_modify_hdr_resource
> > *resource,
> > +			 const struct rte_flow_action *action,
> > +			 struct rte_flow_error *error)
> > +{
> > +	const struct rte_flow_action_set_dscp *conf =
> > +		(const struct rte_flow_action_set_dscp *)(action->conf);
> > +	struct rte_flow_item item = { .type = RTE_FLOW_ITEM_TYPE_IPV6 };
> > +	struct rte_flow_item_ipv6 ipv6;
> > +	struct rte_flow_item_ipv6 ipv6_mask;
> > +
> > +	memset(&ipv6, 0, sizeof(ipv6));
> > +	memset(&ipv6_mask, 0, sizeof(ipv6_mask));
> > +	/*
> > +	 * Even though the DSCP bits offset of IPv6 is not byte aligned,
> > +	 * rdma-core only accept the DSCP bits byte aligned start from
> > +	 * bit 0 to 5 as to be compatible with IPv4. No need to shift the
> > +	 * bits in IPv6 case as rdma-core requires byte aligned value.
> > +	 */
> > +	ipv6.hdr.vtc_flow = conf->dscp;
> > +	ipv6_mask.hdr.vtc_flow = 0x3f;
> 
> Please use RTE_IPV6_HDR_DSCP_MASK.
OK.
> 
> > +	item.spec = &ipv6;
> > +	item.mask = &ipv6_mask;
> > +	return flow_dv_convert_modify_action(&item, modify_ipv6, NULL,
> > resource,
> > +					     MLX5_MODIFICATION_TYPE_SET,
> > error); }
> > +
> > +/**
> >   * Validate MARK item.
> >   *
> >   * @param[in] dev
> > @@ -3433,6 +3511,74 @@ struct field_modify_info modify_tcp[] = {  }
> >
> >  /**
> > + * Validate the modify-header IPv4 DSCP actions.
> > + *
> > + * @param[in] action_flags
> > + *   Holds the actions detected until now.
> > + * @param[in] action
> > + *   Pointer to the modify action.
> > + * @param[in] item_flags
> > + *   Holds the items detected.
> > + * @param[out] error
> > + *   Pointer to error structure.
> > + *
> > + * @return
> > + *   0 on success, a negative errno value otherwise and rte_errno is set.
> > + */
> > +static int
> > +flow_dv_validate_action_modify_ipv4_dscp(const uint64_t action_flags,
> > +					 const struct rte_flow_action *action,
> > +					 const uint64_t item_flags,
> > +					 struct rte_flow_error *error)
> > +{
> > +	int ret = 0;
> > +
> > +	ret = flow_dv_validate_action_modify_hdr(action_flags, action,
> > error);
> > +	if (!ret) {
> > +		if (!(item_flags & MLX5_FLOW_LAYER_L3_IPV4))
> > +			return rte_flow_error_set(error, EINVAL,
> > +
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > +						  NULL,
> > +						  "no ipv4 item in pattern");
> > +	}
> > +	return ret;
> > +}
> > +
> > +/**
> > + * Validate the modify-header IPv6 DSCP actions.
> > + *
> > + * @param[in] action_flags
> > + *   Holds the actions detected until now.
> > + * @param[in] action
> > + *   Pointer to the modify action.
> > + * @param[in] item_flags
> > + *   Holds the items detected.
> > + * @param[out] error
> > + *   Pointer to error structure.
> > + *
> > + * @return
> > + *   0 on success, a negative errno value otherwise and rte_errno is set.
> > + */
> > +static int
> > +flow_dv_validate_action_modify_ipv6_dscp(const uint64_t action_flags,
> > +					 const struct rte_flow_action *action,
> > +					 const uint64_t item_flags,
> > +					 struct rte_flow_error *error)
> > +{
> > +	int ret = 0;
> > +
> > +	ret = flow_dv_validate_action_modify_hdr(action_flags, action,
> > error);
> > +	if (!ret) {
> > +		if (!(item_flags & MLX5_FLOW_LAYER_L3_IPV6))
> > +			return rte_flow_error_set(error, EINVAL,
> > +
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > +						  NULL,
> > +						  "no ipv6 item in pattern");
> > +	}
> > +	return ret;
> > +}
> > +
> > +/**
> >   * Find existing modify-header resource or create and register a new one.
> >   *
> >   * @param dev[in, out]
> > @@ -4806,6 +4952,32 @@ struct field_modify_info modify_tcp[] = {
> >  			action_flags |= MLX5_FLOW_ACTION_METER;
> >  			++actions_n;
> >  			break;
> > +		case RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP:
> > +			ret = flow_dv_validate_action_modify_ipv4_dscp
> > +							 (action_flags,
> > +							  actions,
> > +							  item_flags,
> > +							  error);
> > +			if (ret < 0)
> > +				return ret;
> > +			/* Count all modify-header actions as one action. */
> > +			if (!(action_flags &
> > MLX5_FLOW_MODIFY_HDR_ACTIONS))
> > +				++actions_n;
> > +			action_flags |=
> > MLX5_FLOW_ACTION_SET_IPV4_DSCP;
> > +			break;
> > +		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP:
> > +			ret = flow_dv_validate_action_modify_ipv6_dscp
> > +								(action_flags,
> > +								 actions,
> > +								 item_flags,
> > +								 error);
> > +			if (ret < 0)
> > +				return ret;
> > +			/* Count all modify-header actions as one action. */
> > +			if (!(action_flags &
> > MLX5_FLOW_MODIFY_HDR_ACTIONS))
> > +				++actions_n;
> > +			action_flags |=
> > MLX5_FLOW_ACTION_SET_IPV6_DSCP;
> > +			break;
> >  		default:
> >  			return rte_flow_error_set(error, ENOTSUP,
> >
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > @@ -7101,6 +7273,18 @@ struct field_modify_info modify_tcp[] = {
> >  				flow->meter->mfts->meter_action;
> >  			action_flags |= MLX5_FLOW_ACTION_METER;
> >  			break;
> > +		case RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP:
> > +			if
> > (flow_dv_convert_action_modify_ipv4_dscp(&mhdr_res,
> > +							      actions, error))
> > +				return -rte_errno;
> > +			action_flags |=
> > MLX5_FLOW_ACTION_SET_IPV4_DSCP;
> > +			break;
> > +		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP:
> > +			if
> > (flow_dv_convert_action_modify_ipv6_dscp(&mhdr_res,
> > +							      actions, error))
> > +				return -rte_errno;
> > +			action_flags |=
> > MLX5_FLOW_ACTION_SET_IPV6_DSCP;
> > +			break;
> >  		case RTE_FLOW_ACTION_TYPE_END:
> >  			actions_end = true;
> >  			if (mhdr_res.actions_num) {
> > --
> > 1.8.3.1