[dpdk-dev] [PATCH v3 01/11] examples/l3fwd: add framework for event device
pbhagavatula at marvell.com
pbhagavatula at marvell.com
Sat Jan 11 14:47:20 CET 2020
From: Sunil Kumar Kori <skori at marvell.com>
Add framework to enable event device as a producer of packets.
To switch between event mode and poll mode the following options
have been added:
`--mode="eventdev"` or `--mode="poll"`
Also, allow the user to select the schedule type to be either
RTE_SCHED_TYPE_ORDERED, RTE_SCHED_TYPE_ATOMIC or RTE_SCHED_TYPE_PARALLEL
through:
`--eventq-sched="ordered"` or `--eventq-sched="atomic"` or
`--eventq-sched="parallel"`
Poll mode is still the default operation mode.
Signed-off-by: Sunil Kumar Kori <skori at marvell.com>
Signed-off-by: Nipun Gupta <nipun.gupta at nxp.com>
---
examples/l3fwd/Makefile | 2 +-
examples/l3fwd/l3fwd.h | 1 +
examples/l3fwd/l3fwd_event.c | 40 ++++++++++++++++
examples/l3fwd/l3fwd_event.h | 23 ++++++++++
examples/l3fwd/main.c | 88 ++++++++++++++++++++++++++++++++++--
examples/l3fwd/meson.build | 4 +-
6 files changed, 152 insertions(+), 6 deletions(-)
create mode 100644 examples/l3fwd/l3fwd_event.c
create mode 100644 examples/l3fwd/l3fwd_event.h
diff --git a/examples/l3fwd/Makefile b/examples/l3fwd/Makefile
index b2dbf2607..c892b867b 100644
--- a/examples/l3fwd/Makefile
+++ b/examples/l3fwd/Makefile
@@ -5,7 +5,7 @@
APP = l3fwd
# all source are stored in SRCS-y
-SRCS-y := main.c l3fwd_lpm.c l3fwd_em.c
+SRCS-y := main.c l3fwd_lpm.c l3fwd_em.c l3fwd_event.c
# Build using pkg-config variables if possible
ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
index 293fb1fa2..e2399d76b 100644
--- a/examples/l3fwd/l3fwd.h
+++ b/examples/l3fwd/l3fwd.h
@@ -5,6 +5,7 @@
#ifndef __L3_FWD_H__
#define __L3_FWD_H__
+#include <rte_ethdev.h>
#include <rte_vect.h>
#define DO_RFC_1812_CHECKS
diff --git a/examples/l3fwd/l3fwd_event.c b/examples/l3fwd/l3fwd_event.c
new file mode 100644
index 000000000..1040da4ea
--- /dev/null
+++ b/examples/l3fwd/l3fwd_event.c
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#include <stdbool.h>
+#include <getopt.h>
+
+#include <rte_malloc.h>
+
+#include "l3fwd.h"
+#include "l3fwd_event.h"
+
+struct l3fwd_event_resources *
+l3fwd_get_eventdev_rsrc(void)
+{
+ static struct l3fwd_event_resources *rsrc;
+
+ if (rsrc != NULL)
+ return rsrc;
+
+ rsrc = rte_zmalloc("l3fwd", sizeof(struct l3fwd_event_resources), 0);
+ if (rsrc != NULL) {
+ rsrc->sched_type = RTE_SCHED_TYPE_ATOMIC;
+ rsrc->eth_rx_queues = 1;
+ return rsrc;
+ }
+
+ rte_exit(EXIT_FAILURE, "Unable to allocate memory for eventdev cfg\n");
+
+ return NULL;
+}
+
+void
+l3fwd_event_resource_setup(void)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+
+ if (!evt_rsrc->enabled)
+ return;
+}
diff --git a/examples/l3fwd/l3fwd_event.h b/examples/l3fwd/l3fwd_event.h
new file mode 100644
index 000000000..4c23c4e1a
--- /dev/null
+++ b/examples/l3fwd/l3fwd_event.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#ifndef __L3FWD_EVENTDEV_H__
+#define __L3FWD_EVENTDEV_H__
+
+#include <rte_common.h>
+#include <rte_eventdev.h>
+#include <rte_spinlock.h>
+
+#include "l3fwd.h"
+
+struct l3fwd_event_resources {
+ uint8_t sched_type;
+ uint8_t enabled;
+ uint8_t eth_rx_queues;
+};
+
+struct l3fwd_event_resources *l3fwd_get_eventdev_rsrc(void);
+void l3fwd_event_resource_setup(void);
+
+#endif /* __L3FWD_EVENTDEV_H__ */
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 4dea12a65..582f2f135 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -19,6 +19,7 @@
#include <rte_vect.h>
#include <rte_byteorder.h>
#include <rte_log.h>
+#include <rte_malloc.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_eal.h>
@@ -33,7 +34,6 @@
#include <rte_random.h>
#include <rte_debug.h>
#include <rte_ether.h>
-#include <rte_ethdev.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_ip.h>
@@ -46,6 +46,7 @@
#include <cmdline_parse_etheraddr.h>
#include "l3fwd.h"
+#include "l3fwd_event.h"
/*
* Configurable number of RX/TX ring descriptors
@@ -289,7 +290,9 @@ print_usage(const char *prgname)
" [--hash-entry-num]"
" [--ipv6]"
" [--parse-ptype]"
- " [--per-port-pool]\n\n"
+ " [--per-port-pool]"
+ " [--mode]"
+ " [--eventq-sched]\n\n"
" -p PORTMASK: Hexadecimal bitmask of ports to configure\n"
" -P : Enable promiscuous mode\n"
@@ -304,7 +307,16 @@ print_usage(const char *prgname)
" --hash-entry-num: Specify the hash entry number in hexadecimal to be setup\n"
" --ipv6: Set if running ipv6 packets\n"
" --parse-ptype: Set to use software to analyze packet type\n"
- " --per-port-pool: Use separate buffer pool per port\n\n",
+ " --per-port-pool: Use separate buffer pool per port\n"
+ " --mode: Packet transfer mode for I/O, poll or eventdev\n"
+ " Default mode = poll\n"
+ " --eventq-sched: Event queue synchronization method\n"
+ " ordered, atomic or parallel.\n"
+ " Default: atomic\n"
+ " Valid only if --mode=eventdev\n"
+ " --event-eth-rxqs: Number of ethernet RX queues per device.\n"
+ " Default: 1\n"
+ " Valid only if --mode=eventdev\n\n",
prgname);
}
@@ -440,6 +452,48 @@ parse_eth_dest(const char *optarg)
*(uint64_t *)(val_eth + portid) = dest_eth_addr[portid];
}
+static void
+parse_mode(const char *optarg)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+
+ if (!strcmp(optarg, "poll"))
+ evt_rsrc->enabled = false;
+ else if (!strcmp(optarg, "eventdev"))
+ evt_rsrc->enabled = true;
+}
+
+static void
+parse_eventq_sync(const char *optarg)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+
+ if (!strcmp(optarg, "ordered"))
+ evt_rsrc->sched_type = RTE_SCHED_TYPE_ORDERED;
+ if (!strcmp(optarg, "atomic"))
+ evt_rsrc->sched_type = RTE_SCHED_TYPE_ATOMIC;
+ if (!strcmp(optarg, "parallel"))
+ evt_rsrc->sched_type = RTE_SCHED_TYPE_PARALLEL;
+}
+
+static void
+parse_event_eth_rx_queues(const char *eth_rx_queues)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+ char *end = NULL;
+ uint8_t num_eth_rx_queues;
+
+ /* parse decimal string */
+ num_eth_rx_queues = strtoul(eth_rx_queues, &end, 10);
+ if ((eth_rx_queues[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return;
+
+ if (num_eth_rx_queues == 0)
+ return;
+
+ evt_rsrc->eth_rx_queues = num_eth_rx_queues;
+}
+
#define MAX_JUMBO_PKT_LEN 9600
#define MEMPOOL_CACHE_SIZE 256
@@ -458,6 +512,9 @@ static const char short_options[] =
#define CMD_LINE_OPT_HASH_ENTRY_NUM "hash-entry-num"
#define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype"
#define CMD_LINE_OPT_PER_PORT_POOL "per-port-pool"
+#define CMD_LINE_OPT_MODE "mode"
+#define CMD_LINE_OPT_EVENTQ_SYNC "eventq-sched"
+#define CMD_LINE_OPT_EVENT_ETH_RX_QUEUES "event-eth-rxqs"
enum {
/* long options mapped to a short option */
@@ -472,6 +529,9 @@ enum {
CMD_LINE_OPT_HASH_ENTRY_NUM_NUM,
CMD_LINE_OPT_PARSE_PTYPE_NUM,
CMD_LINE_OPT_PARSE_PER_PORT_POOL,
+ CMD_LINE_OPT_MODE_NUM,
+ CMD_LINE_OPT_EVENTQ_SYNC_NUM,
+ CMD_LINE_OPT_EVENT_ETH_RX_QUEUES_NUM,
};
static const struct option lgopts[] = {
@@ -483,6 +543,10 @@ static const struct option lgopts[] = {
{CMD_LINE_OPT_HASH_ENTRY_NUM, 1, 0, CMD_LINE_OPT_HASH_ENTRY_NUM_NUM},
{CMD_LINE_OPT_PARSE_PTYPE, 0, 0, CMD_LINE_OPT_PARSE_PTYPE_NUM},
{CMD_LINE_OPT_PER_PORT_POOL, 0, 0, CMD_LINE_OPT_PARSE_PER_PORT_POOL},
+ {CMD_LINE_OPT_MODE, 1, 0, CMD_LINE_OPT_MODE_NUM},
+ {CMD_LINE_OPT_EVENTQ_SYNC, 1, 0, CMD_LINE_OPT_EVENTQ_SYNC_NUM},
+ {CMD_LINE_OPT_EVENT_ETH_RX_QUEUES, 1, 0,
+ CMD_LINE_OPT_EVENT_ETH_RX_QUEUES_NUM},
{NULL, 0, 0, 0}
};
@@ -607,6 +671,18 @@ parse_args(int argc, char **argv)
per_port_pool = 1;
break;
+ case CMD_LINE_OPT_MODE_NUM:
+ parse_mode(optarg);
+ break;
+
+ case CMD_LINE_OPT_EVENTQ_SYNC_NUM:
+ parse_eventq_sync(optarg);
+ break;
+
+ case CMD_LINE_OPT_EVENT_ETH_RX_QUEUES_NUM:
+ parse_event_eth_rx_queues(optarg);
+ break;
+
default:
print_usage(prgname);
return -1;
@@ -811,6 +887,7 @@ prepare_ptype_parser(uint16_t portid, uint16_t queueid)
int
main(int argc, char **argv)
{
+ struct l3fwd_event_resources *evt_rsrc;
struct lcore_conf *qconf;
struct rte_eth_dev_info dev_info;
struct rte_eth_txconf *txconf;
@@ -839,11 +916,16 @@ main(int argc, char **argv)
*(uint64_t *)(val_eth + portid) = dest_eth_addr[portid];
}
+ evt_rsrc = l3fwd_get_eventdev_rsrc();
+ RTE_SET_USED(evt_rsrc);
/* parse application arguments (after the EAL ones) */
ret = parse_args(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n");
+ /* Configure eventdev parameters if user has requested */
+ l3fwd_event_resource_setup();
+
if (check_lcore_params() < 0)
rte_exit(EXIT_FAILURE, "check_lcore_params failed\n");
diff --git a/examples/l3fwd/meson.build b/examples/l3fwd/meson.build
index 6dd4b9022..864327c7b 100644
--- a/examples/l3fwd/meson.build
+++ b/examples/l3fwd/meson.build
@@ -6,7 +6,7 @@
# To build this example as a standalone application with an already-installed
# DPDK instance, use 'make'
-deps += ['hash', 'lpm']
+deps += ['hash', 'lpm', 'eventdev']
sources = files(
- 'l3fwd_em.c', 'l3fwd_lpm.c', 'main.c'
+ 'l3fwd_em.c', 'l3fwd_lpm.c', 'l3fwd_event.c', 'main.c'
)
--
2.17.1
More information about the dev
mailing list