[dpdk-dev] [PATCH v2 00/15] add OCTEONTX2 inline IPsec support
Anoob Joseph
anoobj at marvell.com
Sun Jan 19 11:43:49 CET 2020
Hi Jerin,
Will do the suggested change (RX/rx-> Rx & TX/tx->Tx). Do you want me to trim the headline as well?
@Akhil, did you get a chance to review the series? Do you have any comments on the patches?
Thanks,
Anoob
> -----Original Message-----
> From: dev <dev-bounces at dpdk.org> On Behalf Of Jerin Jacob
> Sent: Saturday, January 18, 2020 8:09 PM
> To: Anoob Joseph <anoobj at marvell.com>
> Cc: Akhil Goyal <akhil.goyal at nxp.com>; Declan Doherty
> <declan.doherty at intel.com>; Thomas Monjalon <thomas at monjalon.net>; Jerin
> Jacob Kollanukkaran <jerinj at marvell.com>; Narayana Prasad Raju Athreya
> <pathreya at marvell.com>; Kiran Kumar Kokkilagadda
> <kirankumark at marvell.com>; Nithin Kumar Dabilpuram
> <ndabilpuram at marvell.com>; Pavan Nikhilesh Bhagavatula
> <pbhagavatula at marvell.com>; Ankur Dwivedi <adwivedi at marvell.com>;
> Archana Muniganti <marchana at marvell.com>; Tejasree Kondoj
> <ktejasree at marvell.com>; Vamsi Krishna Attunuru <vattunuru at marvell.com>;
> Lukas Bartosik <lbartosik at marvell.com>; dpdk-dev <dev at dpdk.org>
> Subject: Re: [dpdk-dev] [PATCH v2 00/15] add OCTEONTX2 inline IPsec support
>
> On Sat, Jan 18, 2020 at 4:19 PM Anoob Joseph <anoobj at marvell.com> wrote:
> >
> > This series adds inline IPsec support in OCTEONTX2 PMD.
> >
> > In the inbound path, rte_flow framework need to be used to configure
> > the NPC block, which does the h/w lookup. The packets would get
> > processed by the crypto block and would submit to the scheduling
> > block, SSO. So inline IPsec mode can be enabled only when traffic is
> > received via event device using Rx adapter.
> >
> > In the outbound path, the core would submit to the crypto block and
> > the crypto block would submit the packet for Tx internally.
>
>
> Please fix following check-git-log.sh issues.
>
> Wrong headline lowercase:
> net/octeontx2: add inline ipsec rx path changes
> drivers/octeontx2: add sec in compiler optimized RX fastpath framework
> drivers/octeontx2: add sec in compiler optimized TX fastpath framework
> crypto/octeontx2: add inline tx path changes Headline too long:
> drivers/octeontx2: add sec in compiler optimized RX fastpath framework
> drivers/octeontx2: add sec in compiler optimized TX fastpath framework
> crypto/octeontx2: sync inline tag type cfg with Rx adapter configuration
>
> Changing to Rx and Tx will fix most of the issues.
>
>
>
> > v2:
> > * Minimized additions to common/octeontx2
> > * Updated release notes
> > * Renamed otx2_is_ethdev to otx2_ethdev_is_sec_capable
> >
> > Ankur Dwivedi (3):
> > crypto/octeontx2: add eth security capabilities
> > crypto/octeontx2: add datapath ops in eth security ctx
> > crypto/octeontx2: add inline tx path changes
> >
> > Anoob Joseph (4):
> > common/octeontx2: add CPT LF mbox for inline inbound
> > crypto/octeontx2: create eth security ctx
> > crypto/octeontx2: enable CPT to share QP with ethdev
> > crypto/octeontx2: add eth security session operations
> >
> > Archana Muniganti (3):
> > crypto/octeontx2: add lookup mem changes to hold sa indices
> > drivers/octeontx2: add sec in compiler optimized RX fastpath framework
> > drivers/octeontx2: add sec in compiler optimized TX fastpath
> > framework
> >
> > Tejasree Kondoj (3):
> > crypto/octeontx2: configure for inline IPsec
> > crypto/octeontx2: add security in eth dev configure
> > net/octeontx2: add inline ipsec rx path changes
> >
> > Vamsi Attunuru (2):
> > common/octeontx2: add routine to check if sec capable otx2
> > crypto/octeontx2: sync inline tag type cfg with Rx adapter
> > configuration
> >
> > doc/guides/nics/octeontx2.rst | 20 +
> > doc/guides/rel_notes/release_20_02.rst | 9 +
> > drivers/common/octeontx2/otx2_common.c | 22 +
> > drivers/common/octeontx2/otx2_common.h | 22 +
> > drivers/common/octeontx2/otx2_mbox.h | 7 +
> > .../octeontx2/rte_common_octeontx2_version.map | 3 +
> > drivers/crypto/octeontx2/Makefile | 7 +-
> > drivers/crypto/octeontx2/meson.build | 7 +-
> > drivers/crypto/octeontx2/otx2_cryptodev.c | 8 +
> > .../crypto/octeontx2/otx2_cryptodev_hw_access.h | 22 +-
> > drivers/crypto/octeontx2/otx2_cryptodev_mbox.c | 53 ++
> > drivers/crypto/octeontx2/otx2_cryptodev_mbox.h | 7 +
> > drivers/crypto/octeontx2/otx2_cryptodev_ops.c | 56 ++
> > drivers/crypto/octeontx2/otx2_cryptodev_qp.h | 35 +
> > drivers/crypto/octeontx2/otx2_ipsec_fp.h | 348 +++++++++
> > drivers/crypto/octeontx2/otx2_security.c | 870
> +++++++++++++++++++++
> > drivers/crypto/octeontx2/otx2_security.h | 158 ++++
> > drivers/crypto/octeontx2/otx2_security_tx.h | 175 +++++
> > drivers/event/octeontx2/Makefile | 1 +
> > drivers/event/octeontx2/meson.build | 5 +-
> > drivers/event/octeontx2/otx2_evdev.c | 170 ++--
> > drivers/event/octeontx2/otx2_evdev.h | 4 +-
> > drivers/event/octeontx2/otx2_worker.c | 6 +-
> > drivers/event/octeontx2/otx2_worker.h | 6 +
> > drivers/event/octeontx2/otx2_worker_dual.c | 6 +-
> > drivers/net/octeontx2/Makefile | 1 +
> > drivers/net/octeontx2/meson.build | 3 +
> > drivers/net/octeontx2/otx2_ethdev.c | 46 +-
> > drivers/net/octeontx2/otx2_ethdev.h | 2 +
> > drivers/net/octeontx2/otx2_ethdev_devargs.c | 19 +
> > drivers/net/octeontx2/otx2_flow.c | 26 +
> > drivers/net/octeontx2/otx2_lookup.c | 11 +-
> > drivers/net/octeontx2/otx2_rx.c | 27 +-
> > drivers/net/octeontx2/otx2_rx.h | 377 ++++++---
> > drivers/net/octeontx2/otx2_tx.c | 29 +-
> > drivers/net/octeontx2/otx2_tx.h | 271 +++++--
> > 36 files changed, 2556 insertions(+), 283 deletions(-) create mode
> > 100644 drivers/crypto/octeontx2/otx2_cryptodev_qp.h
> > create mode 100644 drivers/crypto/octeontx2/otx2_ipsec_fp.h
> > create mode 100644 drivers/crypto/octeontx2/otx2_security.c
> > create mode 100644 drivers/crypto/octeontx2/otx2_security.h
> > create mode 100644 drivers/crypto/octeontx2/otx2_security_tx.h
> >
> > --
> > 2.7.4
> >
More information about the dev
mailing list