[dpdk-dev] [PATCH v4 04/11] examples/l3fwd: add ethdev setup based on eventdev

pbhagavatula at marvell.com pbhagavatula at marvell.com
Wed Jan 22 19:28:10 CET 2020


From: Sunil Kumar Kori <skori at marvell.com>

Add ethernet port Rx/Tx queue setup for event device which are later
used for setting up event eth Rx/Tx adapters.

Signed-off-by: Sunil Kumar Kori <skori at marvell.com>
Signed-off-by: Nipun Gupta <nipun.gupta at nxp.com>
---
 examples/l3fwd/l3fwd.h       |  10 +++
 examples/l3fwd/l3fwd_event.c | 138 ++++++++++++++++++++++++++++++++++-
 examples/l3fwd/l3fwd_event.h |   2 +-
 examples/l3fwd/main.c        |  15 ++--
 4 files changed, 153 insertions(+), 12 deletions(-)

diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h
index e2399d76b..ed5ba5f3b 100644
--- a/examples/l3fwd/l3fwd.h
+++ b/examples/l3fwd/l3fwd.h
@@ -16,9 +16,16 @@
 #define NO_HASH_MULTI_LOOKUP 1
 #endif
 
+/*
+ * Configurable number of RX/TX ring descriptors
+ */
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 1024
+
 #define MAX_PKT_BURST     32
 #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
 
+#define MEMPOOL_CACHE_SIZE 256
 #define MAX_RX_QUEUE_PER_LCORE 16
 
 /*
@@ -170,6 +177,9 @@ is_valid_ipv4_pkt(struct rte_ipv4_hdr *pkt, uint32_t link_len)
 }
 #endif /* DO_RFC_1812_CHECKS */
 
+int
+init_mem(uint16_t portid, unsigned int nb_mbuf);
+
 /* Function pointers for LPM or EM functionality. */
 void
 setup_lpm(const int socketid);
diff --git a/examples/l3fwd/l3fwd_event.c b/examples/l3fwd/l3fwd_event.c
index 9cb46c711..f9491ecc6 100644
--- a/examples/l3fwd/l3fwd_event.c
+++ b/examples/l3fwd/l3fwd_event.c
@@ -10,6 +10,14 @@
 #include "l3fwd.h"
 #include "l3fwd_event.h"
 
+static void
+print_ethaddr(const char *name, const struct rte_ether_addr *eth_addr)
+{
+	char buf[RTE_ETHER_ADDR_FMT_SIZE];
+	rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, eth_addr);
+	printf("%s%s", name, buf);
+}
+
 struct l3fwd_event_resources *
 l3fwd_get_eventdev_rsrc(void)
 {
@@ -30,6 +38,131 @@ l3fwd_get_eventdev_rsrc(void)
 	return NULL;
 }
 
+static void
+l3fwd_eth_dev_port_setup(struct rte_eth_conf *port_conf)
+{
+	struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+	uint16_t nb_ports = rte_eth_dev_count_avail();
+	uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
+	uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
+	unsigned int nb_lcores = rte_lcore_count();
+	struct rte_eth_conf local_port_conf;
+	struct rte_eth_dev_info dev_info;
+	struct rte_eth_txconf txconf;
+	struct rte_eth_rxconf rxconf;
+	unsigned int nb_mbuf;
+	uint16_t port_id;
+	uint8_t eth_qid;
+	int32_t ret;
+
+	/* initialize all ports */
+	RTE_ETH_FOREACH_DEV(port_id) {
+		local_port_conf = *port_conf;
+		/* skip ports that are not enabled */
+		if ((evt_rsrc->port_mask & (1 << port_id)) == 0) {
+			printf("\nSkipping disabled port %d\n", port_id);
+			continue;
+		}
+
+		/* init port */
+		printf("Initializing port %d ... ", port_id);
+		fflush(stdout);
+		printf("Creating queues: nb_rxq=%d nb_txq=1...\n",
+		       evt_rsrc->eth_rx_queues);
+
+		rte_eth_dev_info_get(port_id, &dev_info);
+		if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+			local_port_conf.txmode.offloads |=
+						DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+
+		local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
+						dev_info.flow_type_rss_offloads;
+		if (local_port_conf.rx_adv_conf.rss_conf.rss_hf !=
+				port_conf->rx_adv_conf.rss_conf.rss_hf) {
+			printf("Port %u modified RSS hash function "
+			       "based on hardware support,"
+			       "requested:%#"PRIx64" configured:%#"PRIx64"\n",
+			       port_id,
+			       port_conf->rx_adv_conf.rss_conf.rss_hf,
+			       local_port_conf.rx_adv_conf.rss_conf.rss_hf);
+		}
+
+		ret = rte_eth_dev_configure(port_id, evt_rsrc->eth_rx_queues,
+					    1, &local_port_conf);
+		if (ret < 0)
+			rte_exit(EXIT_FAILURE,
+				 "Cannot configure device: err=%d, port=%d\n",
+				 ret, port_id);
+
+		ret = rte_eth_dev_adjust_nb_rx_tx_desc(port_id, &nb_rxd,
+						       &nb_txd);
+		if (ret < 0)
+			rte_exit(EXIT_FAILURE,
+				 "Cannot adjust number of descriptors: err=%d, "
+				 "port=%d\n", ret, port_id);
+
+		rte_eth_macaddr_get(port_id, &ports_eth_addr[port_id]);
+		print_ethaddr(" Address:", &ports_eth_addr[port_id]);
+		printf(", ");
+		print_ethaddr("Destination:",
+			(const struct rte_ether_addr *)&dest_eth_addr[port_id]);
+		printf(", ");
+
+		/* prepare source MAC for each port. */
+		rte_ether_addr_copy(&ports_eth_addr[port_id],
+			(struct rte_ether_addr *)(val_eth + port_id) + 1);
+
+		/* init memory */
+		if (!evt_rsrc->per_port_pool) {
+			/* port_id = 0; this is *not* signifying the first port,
+			 * rather, it signifies that port_id is ignored.
+			 */
+			nb_mbuf = RTE_MAX(nb_ports * nb_rxd +
+					  nb_ports * nb_txd +
+					  nb_ports * nb_lcores *
+							MAX_PKT_BURST +
+					  nb_lcores * MEMPOOL_CACHE_SIZE,
+					  8192u);
+			ret = init_mem(0, nb_mbuf);
+		} else {
+			nb_mbuf = RTE_MAX(nb_rxd + nb_rxd +
+					  nb_lcores * MAX_PKT_BURST +
+					  nb_lcores * MEMPOOL_CACHE_SIZE,
+					  8192u);
+			ret = init_mem(port_id, nb_mbuf);
+		}
+		/* init Rx queues per port */
+		rxconf = dev_info.default_rxconf;
+		rxconf.offloads = local_port_conf.rxmode.offloads;
+
+		for (eth_qid = 0; eth_qid < evt_rsrc->eth_rx_queues;
+		     eth_qid++) {
+			if (!evt_rsrc->per_port_pool)
+				ret = rte_eth_rx_queue_setup(port_id, eth_qid,
+					nb_rxd, 0, &rxconf,
+					evt_rsrc->pkt_pool[0][0]);
+			else
+				ret = rte_eth_rx_queue_setup(port_id, eth_qid,
+					nb_rxd, 0, &rxconf,
+					evt_rsrc->pkt_pool[port_id][0]);
+			if (ret < 0)
+				rte_exit(EXIT_FAILURE,
+					 "rte_eth_rx_queue_setup: err=%d, "
+					 "port=%d, eth_qid: %d\n",
+					 ret, port_id, eth_qid);
+		}
+
+		/* init one Tx queue per port */
+		txconf = dev_info.default_txconf;
+		txconf.offloads = local_port_conf.txmode.offloads;
+		ret = rte_eth_tx_queue_setup(port_id, 0, nb_txd, 0, &txconf);
+		if (ret < 0)
+			rte_exit(EXIT_FAILURE,
+				 "rte_eth_tx_queue_setup: err=%d, "
+				 "port=%d\n", ret, port_id);
+	}
+}
+
 static void
 l3fwd_event_capability_setup(void)
 {
@@ -56,7 +189,7 @@ l3fwd_event_capability_setup(void)
 }
 
 void
-l3fwd_event_resource_setup(void)
+l3fwd_event_resource_setup(struct rte_eth_conf *port_conf)
 {
 	struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
 
@@ -69,6 +202,9 @@ l3fwd_event_resource_setup(void)
 	/* Setup eventdev capability callbacks */
 	l3fwd_event_capability_setup();
 
+	/* Ethernet device configuration */
+	l3fwd_eth_dev_port_setup(port_conf);
+
 	/* Event device configuration */
 	evt_rsrc->ops.event_device_setup();
 }
diff --git a/examples/l3fwd/l3fwd_event.h b/examples/l3fwd/l3fwd_event.h
index fc3862ec1..53feea069 100644
--- a/examples/l3fwd/l3fwd_event.h
+++ b/examples/l3fwd/l3fwd_event.h
@@ -72,7 +72,7 @@ struct l3fwd_event_resources {
 };
 
 struct l3fwd_event_resources *l3fwd_get_eventdev_rsrc(void);
-void l3fwd_event_resource_setup(void);
+void l3fwd_event_resource_setup(struct rte_eth_conf *port_conf);
 void l3fwd_event_set_generic_ops(struct l3fwd_event_setup_ops *ops);
 void l3fwd_event_set_internal_port_ops(struct l3fwd_event_setup_ops *ops);
 
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 8a5cdb52e..04526343f 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -48,12 +48,6 @@
 #include "l3fwd.h"
 #include "l3fwd_event.h"
 
-/*
- * Configurable number of RX/TX ring descriptors
- */
-#define RTE_TEST_RX_DESC_DEFAULT 1024
-#define RTE_TEST_TX_DESC_DEFAULT 1024
-
 #define MAX_TX_QUEUE_PER_PORT RTE_MAX_ETHPORTS
 #define MAX_RX_QUEUE_PER_PORT 128
 
@@ -495,7 +489,6 @@ parse_event_eth_rx_queues(const char *eth_rx_queues)
 }
 
 #define MAX_JUMBO_PKT_LEN  9600
-#define MEMPOOL_CACHE_SIZE 256
 
 static const char short_options[] =
 	"p:"  /* portmask */
@@ -752,7 +745,7 @@ print_ethaddr(const char *name, const struct rte_ether_addr *eth_addr)
 	printf("%s%s", name, buf);
 }
 
-static int
+int
 init_mem(uint16_t portid, unsigned int nb_mbuf)
 {
 	struct lcore_conf *qconf;
@@ -939,14 +932,16 @@ main(int argc, char **argv)
 	}
 
 	evt_rsrc = l3fwd_get_eventdev_rsrc();
-	RTE_SET_USED(evt_rsrc);
 	/* parse application arguments (after the EAL ones) */
 	ret = parse_args(argc, argv);
 	if (ret < 0)
 		rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n");
 
+	evt_rsrc->per_port_pool = per_port_pool;
+	evt_rsrc->pkt_pool = pktmbuf_pool;
+	evt_rsrc->port_mask = enabled_port_mask;
 	/* Configure eventdev parameters if user has requested */
-	l3fwd_event_resource_setup();
+	l3fwd_event_resource_setup(&port_conf);
 
 	if (check_lcore_params() < 0)
 		rte_exit(EXIT_FAILURE, "check_lcore_params failed\n");
-- 
2.17.1



More information about the dev mailing list