[dpdk-dev] [PATCH v4 0/5] integrate librte_ipsec SAD into ipsec-secgw

[Akhil Goyal]

Hi All,
> 
> Hi Konstantin,
> >
> > Hi Akhil,
> >
> > > Hi Vladimir,
> > > The SA lookup logic and management is purely requirement based for the
> > application.
> > >The application may only cater to <128 SAs which can
> > > be handled based on the current logic.
> >
> > Not always, current implementation can handle < 128 SA,
> > whose SPI%128 never match (let say it cant't handle SPI=1 and SPI=129).
> > Yes, what we have right now has nearly zero overhead,
> > and might be ok for some really simple show-cases.
> > But for majority of production IPsec implementations,
> > I believe that definitely wouldn't be enough.
> >
> > > –single-sa option cannot handle this.
> > > Sample applications in DPDK are there to showcase the best a hardware can
> > deliver.
> >
> > My thought was - that's the reason we have single-sa option -
> > demonstrate best possible HW perf without minimal SW intervention.
> > For something more serious than that, we use generic SAD implementation.
> >
> > > IMO, we cannot allow this logic on NXP hardwares. We
> > > give performance numbers based on IPSec app to customers and we cannot
> > allow 15% degradation.
> >
> > As Vladimir said, we are looking how to improve current SAD numbers
> > and minimize the drop.
> > But with same equals - plain array will always be faster than hash table,
> > so not sure we will be able to match existing performance.
> > So two questions:
> > 1. What exact case you use for perf testing
> >     (total number of SAs, packets per burst belong to the same/different SAs)?
> >     Might be there is a way to speedup it.
> >     Again if 10-15% is not an affordable drop, which one is: zero or ...?
> 
> We should add features judiciously, we cannot drop the performance of a
> benchmarking
> Application in lieu of adding functionality. We should only add features which
> are not
> Impacting the performance significantly.
> Every vendor may have different cases. We cannot tune for everybody.
> However, I see drop in 64 outbound 64 inbound SAs all with different SPI and IPs.
> Packets per burst = 32 all with different SAs.
> 

We can have two modes of lookup similar to l3fwd - EM and LPM.
LPM is O(1) while EM is more realistic. Similar logic can be added here as well.
With L3fwd also we showcase performance for best case(lpm) and the worst case(em)
What Say?

As discussed in the DPDK-status meeting today, this patchset need to be discussed in
Techboard meeting. Please include this topic in the upcoming meeting on 29th Jan.

-Akhil

> > 2. I think there are 2 different directions for ipsec-secgw:
> >    From one-side there is a desire to use it as a show-case for best-possible HW
> > IPsec performance
> >   (which is understandable).
> >    From other side - attempt to make it as close as real-world generic ipsec
> > processing app as possible
> >    (support for ESN, replay window, fragmented packets, generic proper SAD,
> > etc).
> >    Obviously these goals contradict and it makes really hard for the same app to
> > fulfill both.
> >    Any thoughts how to deal with that?
> >    One obvious would be to split the app, anything else?
> 
> We can have a fallback mechanism back to original functionality for whatever
> feature
> which has some perf drop.
> Splitting an app can be thought of but that would be similar to a full fledged
> IPSec stack
> like VPP-IPSec.
> 
> >
> > Konstantin
> >
> > > Other vendors(Marvell, ARM, AMD) please comment?
> > > Regards,
> > > Akhil
> > > From: Medvedkin, Vladimir <mailto:vladimir.medvedkin at intel.com>
> > > Sent: Friday, January 17, 2020 10:35 PM
> > > To: Akhil Goyal <mailto:akhil.goyal at nxp.com>; mailto:dev at dpdk.org
> > > Cc: mailto:konstantin.ananyev at intel.com
> > > Subject: Re: [PATCH v4 0/5] integrate librte_ipsec SAD into ipsec-secgw
> > >
> > > Hi Akhil,
> > > Indeed with our tests we also seeing ~15% perf drop for small packets (~90B)
> > and ~3-4% drop for 1KB packets. While I am looking on a ways
> > > to minimize the drop, I think it would be hard, if possible at all to eliminate it
> > completely.
> > > Reason for that: current SAD implementation is completely synthetic (using
> > plain array structure indexed by SPI value). That provides a very
> > > low overhead, but doesn't provide expected functionality and can't be used
> in
> > proper implementation.
> > > To measure plain IPsec performance without SAD user can still use '--signle-
> sa'
> > option.
> > > On 15/01/2020 15:45, Akhil Goyal wrote:
> > > Hi Vladimir,
> > >
> > > There is more than 10% drop with this patchset on NXP hardware with both
> > legacy mode and the ipsec lib mode. This would need some
> > > debugging.
> > > Didn't you see any drop on intel?
> > >
> > > Regards,
> > > Akhil
> > >
> > > -----Original Message-----
> > > From: Vladimir Medvedkin mailto:vladimir.medvedkin at intel.com
> > > Sent: Tuesday, January 14, 2020 7:57 PM
> > > To: mailto:dev at dpdk.org
> > > Cc: mailto:konstantin.ananyev at intel.com; Akhil Goyal
> > mailto:akhil.goyal at nxp.com
> > > Subject: [PATCH v4 0/5] integrate librte_ipsec SAD into ipsec-secgw
> > >
> > > This series integrates SA database (SAD) capabilities from ipsec library.
> > > The goal is to make ipsec-secgw RFC compliant regarding inbound SAD.
> > > Also patch series removes hardcoded limitation for maximum number of SA's
> > > and SP's.
> > >
> > > v4:
> > >  - put tunnel SA's into SAD with SPI_ONLY type for performance reason
> > >
> > > v3:
> > >  - parse SA and SP into sorted array instead of linked list
> > >
> > > v2:
> > >  - get rid of maximum sp limitation
> > >
> > > Vladimir Medvedkin (5):
> > >   ipsec: move ipsec sad name length into .h
> > >   examples/ipsec-secgw: implement inbound SAD
> > >   examples/ipsec-secgw: integrate inbound SAD
> > >   examples/ipsec-secgw: get rid of maximum sa limitation
> > >   examples/ipsec-secgw: get rid of maximum sp limitation
> > >
> > >  examples/ipsec-secgw/Makefile      |   1 +
> > >  examples/ipsec-secgw/ipsec-secgw.c |   4 +-
> > >  examples/ipsec-secgw/ipsec.h       |  11 +-
> > >  examples/ipsec-secgw/meson.build   |   2 +-
> > >  examples/ipsec-secgw/parser.c      |   4 +
> > >  examples/ipsec-secgw/parser.h      |   9 ++
> > >  examples/ipsec-secgw/sa.c          | 256 +++++++++++++++++++++++-----------
> --
> > -
> > >  examples/ipsec-secgw/sad.c         |  90 +++++++++++++
> > >  examples/ipsec-secgw/sad.h         |  74 +++++++++++
> > >  examples/ipsec-secgw/sp4.c         | 114 ++++++++++++-----
> > >  examples/ipsec-secgw/sp6.c         | 112 +++++++++++-----
> > >  lib/librte_ipsec/ipsec_sad.c       |  20 +--
> > >  lib/librte_ipsec/rte_ipsec_sad.h   |   2 +
> > >  13 files changed, 528 insertions(+), 171 deletions(-)
> > >  create mode 100644 examples/ipsec-secgw/sad.c
> > >  create mode 100644 examples/ipsec-secgw/sad.h
> > >
> > > --
> > > 2.7.4
> > >
> > > --
> > > Regards,
> > > Vladimir
> > > -->