[dpdk-dev] [PATCH v7 1/6] lib/eal: implement the family of PMD bit operation APIs
Joyce Kong
joyce.kong at arm.com
Mon Mar 9 10:54:05 CET 2020
Bitwise operation APIs are defined and used in a lot of PMDs,
which caused a huge code duplication. To reduce duplication,
this patch consolidates them into a common API family.
Signed-off-by: Joyce Kong <joyce.kong at arm.com>
Reviewed-by: Gavin Hu <gavin.hu at arm.com>
Reviewed-by: Phil Yang <phil.yang at arm.com>
Acked-by: Morten Brørup <mb at smartsharesystems.com>
---
MAINTAINERS | 4 +
doc/api/doxy-api-index.md | 5 +-
drivers/net/Makefile | 1 +
lib/librte_eal/common/Makefile | 1 +
.../common/include/rte_pmd_bitops.h | 257 ++++++++++++++++++
lib/librte_eal/common/meson.build | 3 +-
6 files changed, 268 insertions(+), 3 deletions(-)
create mode 100644 lib/librte_eal/common/include/rte_pmd_bitops.h
diff --git a/MAINTAINERS b/MAINTAINERS
index f4e0ed8e0..071daf887 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -244,6 +244,10 @@ M: Cristian Dumitrescu <cristian.dumitrescu at intel.com>
F: lib/librte_eal/common/include/rte_bitmap.h
F: app/test/test_bitmap.c
+PMD Bitops
+M: Joyce Kong <joyce.kong at arm.com>
+F: lib/librte_eal/common/include/rte_pmd_bitops.h
+
MCSlock - EXPERIMENTAL
M: Phil Yang <phil.yang at arm.com>
F: lib/librte_eal/common/include/generic/rte_mcslock.h
diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md
index dff496be0..64ab142f3 100644
--- a/doc/api/doxy-api-index.md
+++ b/doc/api/doxy-api-index.md
@@ -35,6 +35,7 @@ The public API headers are grouped by topics:
[vfio] (@ref rte_vfio.h)
- **device specific**:
+ [pmd_bitops] (@ref rte_pmd_bitops.h),
[softnic] (@ref rte_eth_softnic.h),
[bond] (@ref rte_eth_bond.h),
[vhost] (@ref rte_vhost.h),
@@ -133,12 +134,12 @@ The public API headers are grouped by topics:
[BPF] (@ref rte_bpf.h)
- **containers**:
+ [bitmap] (@ref rte_bitmap.h),
[mbuf] (@ref rte_mbuf.h),
[mbuf pool ops] (@ref rte_mbuf_pool_ops.h),
[ring] (@ref rte_ring.h),
[stack] (@ref rte_stack.h),
- [tailq] (@ref rte_tailq.h),
- [bitmap] (@ref rte_bitmap.h)
+ [tailq] (@ref rte_tailq.h)
- **packet framework**:
* [port] (@ref rte_port.h):
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 4a7f155fc..1a3202d1c 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -3,6 +3,7 @@
include $(RTE_SDK)/mk/rte.vars.mk
+INC := rte_pmd_bitops.h
# set in mk/toolchain/xxx/rte.toolchain-compat.mk
ifeq ($(CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD),d)
$(warning thunderx pmd is not supported by old compilers)
diff --git a/lib/librte_eal/common/Makefile b/lib/librte_eal/common/Makefile
index c2c6d92cd..24a5ae94f 100644
--- a/lib/librte_eal/common/Makefile
+++ b/lib/librte_eal/common/Makefile
@@ -19,6 +19,7 @@ INC += rte_malloc.h rte_keepalive.h rte_time.h
INC += rte_service.h rte_service_component.h
INC += rte_bitmap.h rte_vfio.h rte_hypervisor.h rte_test.h
INC += rte_reciprocal.h rte_fbarray.h rte_uuid.h
+INC += rte_pmd_bitops.h
GENERIC_INC := rte_atomic.h rte_byteorder.h rte_cycles.h rte_prefetch.h
GENERIC_INC += rte_memcpy.h rte_cpuflags.h
diff --git a/lib/librte_eal/common/include/rte_pmd_bitops.h b/lib/librte_eal/common/include/rte_pmd_bitops.h
new file mode 100644
index 000000000..b7801e01e
--- /dev/null
+++ b/lib/librte_eal/common/include/rte_pmd_bitops.h
@@ -0,0 +1,257 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Arm Limited
+ */
+
+#ifndef _RTE_PMD_BITOPS_H_
+#define _RTE_PMD_BITOPS_H_
+
+/**
+ * @file
+ * Bit Operations
+ *
+ * This file defines a API for bit operations without/with memory ordering.
+ */
+
+#include <stdint.h>
+#include <rte_debug.h>
+#include <rte_compat.h>
+
+/*---------------------------- 32 bit operations ----------------------------*/
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Get the target bit from a 32-bit value without memory ordering.
+ *
+ * @param nr
+ * The target bit to get.
+ * @param addr
+ * The address holding the bit.
+ * @return
+ * The target bit.
+ */
+__rte_experimental
+static inline uint32_t
+rte_get_bit32_relaxed(unsigned int nr, volatile uint32_t *addr)
+{
+ RTE_ASSERT(nr < 32);
+
+ uint32_t mask = UINT32_C(1) << nr;
+ return (*addr) & mask;
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Set the target bit in a 32-bit value to 1 without memory ordering.
+ *
+ * @param nr
+ * The target bit to set.
+ * @param addr
+ * The address holding the bit.
+ */
+__rte_experimental
+static inline void
+rte_set_bit32_relaxed(unsigned int nr, volatile uint32_t *addr)
+{
+ RTE_ASSERT(nr < 32);
+
+ uint32_t mask = UINT32_C(1) << nr;
+ *addr = (*addr) | mask;
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Clear the target bit in a 32-bit value to 0 without memory ordering.
+ *
+ * @param nr
+ * The target bit to clear.
+ * @param addr
+ * The address holding the bit.
+ */
+__rte_experimental
+static inline void
+rte_clear_bit32_relaxed(unsigned int nr, volatile uint32_t *addr)
+{
+ RTE_ASSERT(nr < 32);
+
+ uint32_t mask = UINT32_C(1) << nr;
+ *addr = (*addr) & (~mask);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Return the original bit from a 32-bit value, then set it to 1 without
+ * memory ordering.
+ *
+ * @param nr
+ * The target bit to get and set.
+ * @param addr
+ * The address holding the bit.
+ * @return
+ * The original bit.
+ */
+__rte_experimental
+static inline uint32_t
+rte_test_and_set_bit32_relaxed(unsigned int nr, volatile uint32_t *addr)
+{
+ RTE_ASSERT(nr < 32);
+
+ uint32_t mask = UINT32_C(1) << nr;
+ uint32_t val = *addr;
+ *addr = (*addr) | mask;
+ return val & mask;
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Return the original bit from a 32-bit value, then clear it to 0 without
+ * memory ordering.
+ *
+ * @param nr
+ * The target bit to get and clear.
+ * @param addr
+ * The address holding the bit.
+ * @return
+ * The original bit.
+ */
+__rte_experimental
+static inline uint32_t
+rte_test_and_clear_bit32_relaxed(unsigned int nr, volatile uint32_t *addr)
+{
+ RTE_ASSERT(nr < 32);
+
+ uint32_t mask = UINT32_C(1) << nr;
+ uint32_t val = *addr;
+ *addr = (*addr) & (~mask);
+ return val & mask;
+}
+
+/*---------------------------- 64 bit operations ----------------------------*/
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Get the target bit from a 64-bit value without memory ordering.
+ *
+ * @param nr
+ * The target bit to get.
+ * @param addr
+ * The address holding the bit.
+ * @return
+ * The target bit.
+ */
+__rte_experimental
+static inline uint64_t
+rte_get_bit64_relaxed(unsigned int nr, volatile uint64_t *addr)
+{
+ RTE_ASSERT(nr < 64);
+
+ uint64_t mask = UINT64_C(1) << nr;
+ return (*addr) & mask;
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Set the target bit in a 64-bit value to 1 without memory ordering.
+ *
+ * @param nr
+ * The target bit to set.
+ * @param addr
+ * The address holding the bit.
+ */
+__rte_experimental
+static inline void
+rte_set_bit64_relaxed(unsigned int nr, volatile uint64_t *addr)
+{
+ RTE_ASSERT(nr < 64);
+
+ uint64_t mask = UINT64_C(1) << nr;
+ (*addr) = (*addr) | mask;
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Clear the target bit in a 64-bit value to 0 without memory ordering.
+ *
+ * @param nr
+ * The target bit to clear.
+ * @param addr
+ * The address holding the bit.
+ */
+__rte_experimental
+static inline void
+rte_clear_bit64_relaxed(unsigned int nr, volatile uint64_t *addr)
+{
+ RTE_ASSERT(nr < 64);
+
+ uint64_t mask = UINT64_C(1) << nr;
+ *addr = (*addr) & (~mask);
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Return the original bit from a 64-bit value, then set it to 1 without
+ * memory ordering.
+ *
+ * @param nr
+ * The target bit to get and set.
+ * @param addr
+ * The address holding the bit.
+ * @return
+ * The original bit.
+ */
+__rte_experimental
+static inline uint64_t
+rte_test_and_set_bit64_relaxed(unsigned int nr, volatile uint64_t *addr)
+{
+ RTE_ASSERT(nr < 64);
+
+ uint64_t mask = UINT64_C(1) << nr;
+ uint64_t val = *addr;
+ *addr = (*addr) | mask;
+ return val;
+}
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Return the original bit from a 64-bit value, then clear it to 0 without
+ * memory ordering.
+ *
+ * @param nr
+ * The target bit to get and clear.
+ * @param addr
+ * The address holding the bit.
+ * @return
+ * The original bit.
+ */
+__rte_experimental
+static inline uint64_t
+rte_test_and_clear_bit64_relaxed(unsigned int nr, volatile uint64_t *addr)
+{
+ RTE_ASSERT(nr < 64);
+
+ uint64_t mask = UINT64_C(1) << nr;
+ uint64_t val = *addr;
+ *addr = (*addr) & (~mask);
+ return val & mask;
+}
+
+#endif /* _RTE_PMD_BITOPS_H_ */
diff --git a/lib/librte_eal/common/meson.build b/lib/librte_eal/common/meson.build
index 2b97715a2..0862ae64c 100644
--- a/lib/librte_eal/common/meson.build
+++ b/lib/librte_eal/common/meson.build
@@ -50,9 +50,9 @@ common_objs += eal_common_arch_objs
common_headers = files(
'include/rte_alarm.h',
+ 'include/rte_bitmap.h',
'include/rte_branch_prediction.h',
'include/rte_bus.h',
- 'include/rte_bitmap.h',
'include/rte_class.h',
'include/rte_common.h',
'include/rte_compat.h',
@@ -78,6 +78,7 @@ common_headers = files(
'include/rte_pci_dev_feature_defs.h',
'include/rte_pci_dev_features.h',
'include/rte_per_lcore.h',
+ 'include/rte_pmd_bitops.h',
'include/rte_random.h',
'include/rte_reciprocal.h',
'include/rte_service.h',
--
2.17.1
More information about the dev
mailing list