[dpdk-dev] [PATCH v2] devtools: forbid variable declaration inside for
Thomas Monjalon
thomas at monjalon.net
Sun May 24 19:30:07 CEST 2020
Some compilers raise an error when declaring a variable
in the middle of a function. This is a C99 allowance.
Even if DPDK switches globally to C99 or C11 standard,
the coding rules are for declarations at the beginning
of a block:
http://doc.dpdk.org/guides/contributing/coding_style.html#local-variables
This coding style is enforced by adding a check of
the common patterns like "for (int i;"
The occurrences of the checked pattern are fixed:
'for *(\(char\|u\?int\|unsigned\|s\?size_t\)'
In the file dpaa2_sparser.c, the fix is to remove the unused macros.
Signed-off-by: Thomas Monjalon <thomas at monjalon.net>
---
v2:
- check s?size_t and fix one occurence
- fix new occurences in Windows EAL
- test-fib has been fixed in the meantime
---
devtools/checkpatches.sh | 8 ++++++++
doc/guides/prog_guide/eventdev.rst | 6 ++++--
drivers/common/mlx5/mlx5_devx_cmds.c | 4 ++--
drivers/common/mlx5/mlx5_glue.c | 3 ++-
drivers/crypto/caam_jr/caam_jr.c | 5 ++++-
drivers/net/dpaa2/dpaa2_sparser.c | 30 ----------------------------
lib/librte_eal/windows/eal_lcore.c | 6 ++++--
7 files changed, 24 insertions(+), 38 deletions(-)
diff --git a/devtools/checkpatches.sh b/devtools/checkpatches.sh
index 42b833e0d7..5763a7e953 100755
--- a/devtools/checkpatches.sh
+++ b/devtools/checkpatches.sh
@@ -69,6 +69,14 @@ check_forbidden_additions() { # <patch>
-f $(dirname $(readlink -f $0))/check-forbidden-tokens.awk \
"$1" || res=1
+ # forbid variable declaration inside "for" loop
+ awk -v FOLDERS='.' \
+ -v EXPRESSIONS='for *\\((char|u?int|unsigned|s?size_t)' \
+ -v RET_ON_FAIL=1 \
+ -v MESSAGE='Declaring a variable inside for()' \
+ -f $(dirname $(readlink -f $0))/check-forbidden-tokens.awk \
+ "$1" || res=1
+
# svg figures must be included with wildcard extension
# because of png conversion for pdf docs
awk -v FOLDERS='doc' \
diff --git a/doc/guides/prog_guide/eventdev.rst b/doc/guides/prog_guide/eventdev.rst
index 7bcd7603b1..ccde086f63 100644
--- a/doc/guides/prog_guide/eventdev.rst
+++ b/doc/guides/prog_guide/eventdev.rst
@@ -242,9 +242,10 @@ Once queues are set up successfully, create the ports as required.
};
int dev_id = 0;
int rx_port_id = 0;
+ int worker_port_id;
int err = rte_event_port_setup(dev_id, rx_port_id, &rx_conf);
- for(int worker_port_id = 1; worker_port_id <= 4; worker_port_id++) {
+ for (worker_port_id = 1; worker_port_id <= 4; worker_port_id++) {
int err = rte_event_port_setup(dev_id, worker_port_id, &worker_conf);
}
@@ -277,8 +278,9 @@ can be achieved like this:
uint8_t atomic_qs[] = {0, 1};
uint8_t single_link_q = 2;
uint8_t priority = RTE_EVENT_DEV_PRIORITY_NORMAL;
+ int worker_port_id;
- for(int worker_port_id = 1; worker_port_id <= 4; worker_port_id++) {
+ for (worker_port_id = 1; worker_port_id <= 4; worker_port_id++) {
int links_made = rte_event_port_link(dev_id, worker_port_id, atomic_qs, NULL, 2);
}
int links_made = rte_event_port_link(dev_id, tx_port_id, &single_link_q, &priority, 1);
diff --git a/drivers/common/mlx5/mlx5_devx_cmds.c b/drivers/common/mlx5/mlx5_devx_cmds.c
index fba485e724..1c8b36c91a 100644
--- a/drivers/common/mlx5/mlx5_devx_cmds.c
+++ b/drivers/common/mlx5/mlx5_devx_cmds.c
@@ -416,7 +416,7 @@ mlx5_devx_cmd_query_hca_attr(void *ctx,
uint32_t in[MLX5_ST_SZ_DW(query_hca_cap_in)] = {0};
uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0};
void *hcattr;
- int status, syndrome, rc;
+ int status, syndrome, rc, i;
MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP);
MLX5_SET(query_hca_cap_in, in, op_mod,
@@ -529,7 +529,7 @@ mlx5_devx_cmd_query_hca_attr(void *ctx,
attr->lro_max_msg_sz_mode = MLX5_GET
(per_protocol_networking_offload_caps,
hcattr, lro_max_msg_sz_mode);
- for (int i = 0 ; i < MLX5_LRO_NUM_SUPP_PERIODS ; i++) {
+ for (i = 0 ; i < MLX5_LRO_NUM_SUPP_PERIODS ; i++) {
attr->lro_timer_supported_periods[i] =
MLX5_GET(per_protocol_networking_offload_caps, hcattr,
lro_timer_supported_periods[i]);
diff --git a/drivers/common/mlx5/mlx5_glue.c b/drivers/common/mlx5/mlx5_glue.c
index f270f677b7..563941c2df 100644
--- a/drivers/common/mlx5/mlx5_glue.c
+++ b/drivers/common/mlx5/mlx5_glue.c
@@ -587,11 +587,12 @@ mlx5_glue_dv_create_flow(void *matcher,
return mlx5dv_dr_rule_create(matcher, match_value, num_actions,
(struct mlx5dv_dr_action **)actions);
#else
+ size_t i;
struct mlx5dv_flow_action_attr actions_attr[8];
if (num_actions > 8)
return NULL;
- for (size_t i = 0; i < num_actions; i++)
+ for (i = 0; i < num_actions; i++)
actions_attr[i] =
*((struct mlx5dv_flow_action_attr *)(actions[i]));
return mlx5dv_create_flow(matcher, match_value,
diff --git a/drivers/crypto/caam_jr/caam_jr.c b/drivers/crypto/caam_jr/caam_jr.c
index caf2386772..77fa6ff2d3 100644
--- a/drivers/crypto/caam_jr/caam_jr.c
+++ b/drivers/crypto/caam_jr/caam_jr.c
@@ -1351,6 +1351,9 @@ caam_jr_enqueue_op(struct rte_crypto_op *op, struct caam_jr_qp *qp)
struct caam_jr_session *ses;
struct caam_jr_op_ctx *ctx = NULL;
struct sec_job_descriptor_t *jobdescr __rte_unused;
+#if CAAM_JR_DBG
+ int i;
+#endif
switch (op->sess_type) {
case RTE_CRYPTO_OP_WITH_SESSION:
@@ -1413,7 +1416,7 @@ caam_jr_enqueue_op(struct rte_crypto_op *op, struct caam_jr_qp *qp)
rte_pktmbuf_data_len(op->sym->m_src));
printf("\n JD before conversion\n");
- for (int i = 0; i < 12; i++)
+ for (i = 0; i < 12; i++)
printf("\n 0x%08x", ctx->jobdes.desc[i]);
#endif
diff --git a/drivers/net/dpaa2/dpaa2_sparser.c b/drivers/net/dpaa2/dpaa2_sparser.c
index 7e8fedd818..ba0d500f74 100644
--- a/drivers/net/dpaa2/dpaa2_sparser.c
+++ b/drivers/net/dpaa2/dpaa2_sparser.c
@@ -145,36 +145,6 @@ struct frame_attr_ext frame_attr_ext_arr[] = {
/* 112 */ {NULL, 0, 0x0000}
};
-#define SWAP_WORD(pr) \
-do { \
- for (int i = 0; i < 4 ; i++) { \
- pr[i] = pr[i] ^ pr[6 - i + 1]; \
- pr[6 - i + 1] = pr[6 - i + 1] ^ pr[i]; \
- pr[i] = pr[i] ^ pr[6 - i + 1]; \
- } \
-} while (0)
-
-#define fa_print_sb() \
-do { \
- if (rte_cpu_to_be_32(*pdw) & frm_attr->fld_mask) \
- DPAA2_PMD_DP_DEBUG("t %s : Yes", frm_attr->fld_name); \
-} while (0)
-
-#define fa_print_sb_ext() \
-do { \
- if (rte_cpu_to_be_16(*pw) & frm_attr_ext->fld_mask) \
- DPAA2_PMD_DP_DEBUG("\t %s : Yes", \
- frm_attr_ext->fld_name); \
-} while (0)
-
-#define fa_print_mb_ext() \
-do { \
- if (rte_cpu_to_be_16(*pw) & frm_attr_ext->fld_mask) \
- DPAA2_PMD_DP_DEBUG("\t %s : 0x%02x", \
- frm_attr_ext->fld_name, \
- rte_cpu_to_be_16(*pw) & frm_attr_ext->fld_mask);\
-} while (0)
-
int dpaa2_eth_load_wriop_soft_parser(struct dpaa2_dev_priv *priv,
enum dpni_soft_sequence_dest dest)
{
diff --git a/lib/librte_eal/windows/eal_lcore.c b/lib/librte_eal/windows/eal_lcore.c
index 82ee454134..760b3fcfed 100644
--- a/lib/librte_eal/windows/eal_lcore.c
+++ b/lib/librte_eal/windows/eal_lcore.c
@@ -29,6 +29,8 @@ static struct _wcpu_map {
void
eal_create_cpu_map()
{
+ unsigned int socket, core;
+
wcpu_map.total_procs =
GetActiveProcessorCount(ALL_PROCESSOR_GROUPS);
@@ -56,9 +58,9 @@ eal_create_cpu_map()
* equally across the sockets.
*/
unsigned int lcore = 0;
- for (unsigned int socket = 0; socket <
+ for (socket = 0; socket <
wcpu_map.proc_sockets; ++socket) {
- for (unsigned int core = 0;
+ for (core = 0;
core < (wcpu_map.proc_cores / wcpu_map.proc_sockets);
++core) {
wcpu_map.wlcore_map[lcore]
--
2.26.2
More information about the dev
mailing list