[dpdk-dev] [PATCH v3 09/16] net/octeontx2: switch Rx timestamp to dynamic mbuf field
Harman Kalra
hkalra at marvell.com
Tue Nov 3 11:52:37 CET 2020
On Tue, Nov 03, 2020 at 01:14:00AM +0100, Thomas Monjalon wrote:
> The mbuf timestamp is moved to a dynamic field
> in order to allow removal of the deprecated static field.
> The related mbuf flag is also replaced.
>
> The dynamic offset and flag are stored in struct otx2_timesync_info
> to favor cache locality.
>
> Signed-off-by: Thomas Monjalon <thomas at monjalon.net>
Hi Thomas,
With the following changes, ptpclient and testpmd(ieee1588 mode) is
crashing for us. I am debugging the issue and will update soon.
------------------
Steps to reproduce:
1. Testpmd:
./dpdk-testpmd -c 0xffff01 -n 4 -w 0002:05:00.0 -- -i
--port-topology=loop
testpmd> set fwd ieee1588
testpmd> set port 0 ptype_mask 0xf
testpmd> start
I am sending ptp packets using scapy from the peer:
>>> p = Ether(src='98:03:9b:67:b0:d0', dst='FA:62:0C:27:AD:BC',
>>> type=35063)/Raw(load='\x00\x02')
>>> sendp (p, iface="p5p2")
I am observing seg fault even for 1 packet.
2. ./ptpclient -l 1 -n 4 -w 0002:05:00.0 -- -p 0xf -- on board
ptp4l -E -2 -H -i p5p2 -m -q -p /dev/ptp4 ... on peer
Thanks
Harman
> ---
> drivers/net/octeontx2/otx2_ethdev.c | 10 ++++++++++
> drivers/net/octeontx2/otx2_rx.h | 19 ++++++++++++++++---
> 2 files changed, 26 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
> index cfb733a4b5..f6962be9b2 100644
> --- a/drivers/net/octeontx2/otx2_ethdev.c
> +++ b/drivers/net/octeontx2/otx2_ethdev.c
> @@ -2219,6 +2219,16 @@ otx2_nix_dev_start(struct rte_eth_dev *eth_dev)
> else
> otx2_nix_timesync_disable(eth_dev);
>
> + if (dev->rx_offload_flags & NIX_RX_OFFLOAD_TSTAMP_F) {
> + rc = rte_mbuf_dyn_rx_timestamp_register(
> + &dev->tstamp.tstamp_dynfield_offset,
> + &dev->tstamp.rx_tstamp_dynflag);
> + if (rc != 0) {
> + otx2_err("Failed to register Rx timestamp field/flag");
> + return -rte_errno;
> + }
> + }
> +
> /* Update VF about data off shifted by 8 bytes if PTP already
> * enabled in PF owning this VF
> */
> diff --git a/drivers/net/octeontx2/otx2_rx.h b/drivers/net/octeontx2/otx2_rx.h
> index 61a5c436dd..926f614a4e 100644
> --- a/drivers/net/octeontx2/otx2_rx.h
> +++ b/drivers/net/octeontx2/otx2_rx.h
> @@ -49,6 +49,8 @@ struct otx2_timesync_info {
> uint64_t rx_tstamp;
> rte_iova_t tx_tstamp_iova;
> uint64_t *tx_tstamp;
> + uint64_t rx_tstamp_dynflag;
> + int tstamp_dynfield_offset;
> uint8_t tx_ready;
> uint8_t rx_ready;
> } __rte_cache_aligned;
> @@ -63,6 +65,14 @@ union mbuf_initializer {
> uint64_t value;
> };
>
> +static inline rte_mbuf_timestamp_t *
> +otx2_timestamp_dynfield(struct rte_mbuf *mbuf,
> + struct otx2_timesync_info *info)
> +{
> + return RTE_MBUF_DYNFIELD(mbuf,
> + info->tstamp_dynfield_offset, rte_mbuf_timestamp_t *);
> +}
> +
> static __rte_always_inline void
> otx2_nix_mbuf_to_tstamp(struct rte_mbuf *mbuf,
> struct otx2_timesync_info *tstamp, const uint16_t flag,
> @@ -77,15 +87,18 @@ otx2_nix_mbuf_to_tstamp(struct rte_mbuf *mbuf,
> /* Reading the rx timestamp inserted by CGX, viz at
> * starting of the packet data.
> */
> - mbuf->timestamp = rte_be_to_cpu_64(*tstamp_ptr);
> + *otx2_timestamp_dynfield(mbuf, tstamp) =
> + rte_be_to_cpu_64(*tstamp_ptr);
> /* PKT_RX_IEEE1588_TMST flag needs to be set only in case
> * PTP packets are received.
> */
> if (mbuf->packet_type == RTE_PTYPE_L2_ETHER_TIMESYNC) {
> - tstamp->rx_tstamp = mbuf->timestamp;
> + tstamp->rx_tstamp =
> + *otx2_timestamp_dynfield(mbuf, tstamp);
> tstamp->rx_ready = 1;
> mbuf->ol_flags |= PKT_RX_IEEE1588_PTP |
> - PKT_RX_IEEE1588_TMST | PKT_RX_TIMESTAMP;
> + PKT_RX_IEEE1588_TMST |
> + tstamp->rx_tstamp_dynflag;
> }
> }
> }
> --
> 2.28.0
>
More information about the dev
mailing list