[dpdk-dev] [PATCH] net/mlx5: fix switch port id when representor in bonding

Bill Zhou dongz at mellanox.com
Wed Nov 4 07:04:55 CET 2020


From: Bill Zhou <dongzhou at nvidia.com>

In the bonding configurations the port switch id for representors
was composed of pf index in bonding as the 1 msb and the representor's
index as the remaining 15 lsbs. The special corner case for the host
PF representor on BF setups with representor id 0xFFFF was missed as well.

The new switch port id consists of 4 msbs for the pf bonding index and
the remaining 12 lsbs for the representor index. The switch port id ranges
for each type of representors are as follows:

Uplink representor(AKA master): 0xFFFF
Host PF representor: 0x<pf_bond>FFF
VF representor: 0x<pf_bond>[0-FFE]

Fixes: bee57a0a3565 ("net/mlx5: update switch port id in bonding configuration")
Cc: stable at dpdk.org

Signed-off-by: Bill Zhou <dongzhou at nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo at nvidia.com>
---
 drivers/net/mlx5/mlx5_defs.h   |  2 +-
 drivers/net/mlx5/mlx5_ethdev.c | 12 ++++++++++--
 2 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h
index 4980352..f8f8a1f 100644
--- a/drivers/net/mlx5/mlx5_defs.h
+++ b/drivers/net/mlx5/mlx5_defs.h
@@ -50,7 +50,7 @@
 
 /* Switch port ID parameters for bonding configurations. */
 #define MLX5_PORT_ID_BONDING_PF_MASK 0xf
-#define MLX5_PORT_ID_BONDING_PF_SHIFT 0xf
+#define MLX5_PORT_ID_BONDING_PF_SHIFT 12
 
 /* Alarm timeout. */
 #define MLX5_ALARM_TIMEOUT_US 100000
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index ee97480..a3910cf 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -338,14 +338,22 @@
 			 * representors (more than 4K) or PFs (more than 15)
 			 * this approach must be reconsidered.
 			 */
-			if ((info->switch_info.port_id >>
-				MLX5_PORT_ID_BONDING_PF_SHIFT) ||
+			/* Switch port ID for VF representors: 0 - 0xFFE */
+			if ((info->switch_info.port_id != 0xffff &&
+				info->switch_info.port_id >=
+				((1 << MLX5_PORT_ID_BONDING_PF_SHIFT) - 1)) ||
 			    priv->pf_bond > MLX5_PORT_ID_BONDING_PF_MASK) {
 				DRV_LOG(ERR, "can't update switch port ID"
 					     " for bonding device");
 				MLX5_ASSERT(false);
 				return -ENODEV;
 			}
+			/*
+			 * Switch port ID for Host PF representor
+			 * (representor_id is -1) , set to 0xFFF
+			 */
+			if (info->switch_info.port_id == 0xffff)
+				info->switch_info.port_id = 0xfff;
 			info->switch_info.port_id |=
 				priv->pf_bond << MLX5_PORT_ID_BONDING_PF_SHIFT;
 		}
-- 
1.8.3.1



More information about the dev mailing list