[dpdk-dev] [PATCH v8 01/14] build: alias default build as generic
Honnappa Nagarahalli
Honnappa.Nagarahalli at arm.com
Sat Nov 7 00:52:39 CET 2020
<snip>
>
> The current machine='default' build name is not descriptive. The actual
> default build is machine='native'. Add an alternative string which does the
> same build and better describes what we're building:
> machine='generic'. Leave machine='default' for backwards compatibility.
>
> Signed-off-by: Juraj Linkeš <juraj.linkes at pantheon.tech>
> ---
> config/arm/meson.build | 5 +++--
> config/meson.build | 9 +++++----
> doc/guides/prog_guide/build-sdk-meson.rst | 4 ++--
> meson_options.txt | 2 +-
> 4 files changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/config/arm/meson.build b/config/arm/meson.build index
> 42b4e43c7..d4066ade8 100644
> --- a/config/arm/meson.build
> +++ b/config/arm/meson.build
> @@ -1,12 +1,13 @@
> # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel
> Corporation.
> # Copyright(c) 2017 Cavium, Inc
> +# Copyright(c) 2020 PANTHEON.tech s.r.o.
>
> # for checking defines we need to use the correct compiler flags march_opt =
> '-march=@0@'.format(machine)
>
> arm_force_native_march = false
> -arm_force_default_march = (machine == 'default')
> +arm_force_generic_march = (machine == 'generic')
>
> flags_common_default = [
> # Accelarate rte_memcpy. Be sure to run unit test
> (memcpy_perf_autotest) @@ -148,7 +149,7 @@ else
> cmd_generic = ['generic', '', '', 'default', '']
> cmd_output = cmd_generic # Set generic by default
> machine_args = [] # Clear previous machine args
> - if arm_force_default_march and not meson.is_cross_build()
> + if arm_force_generic_march and not meson.is_cross_build()
> machine = impl_generic
> impl_pn = 'default'
> elif not meson.is_cross_build()
> diff --git a/config/meson.build b/config/meson.build index
> 258b01d06..c7f7aa6e2 100644
> --- a/config/meson.build
> +++ b/config/meson.build
> @@ -68,13 +68,14 @@ else
> machine = get_option('machine')
> endif
>
> -# machine type 'default' is special, it defaults to the per arch agreed common
> -# minimal baseline needed for DPDK.
> +# machine type 'generic' is special, it defaults to the per arch agreed
> +common # minimal baseline needed for DPDK. Machine type 'default' is
> +also supported # with the same meaning for backwards compatibility.
> # That might not be the most optimized, but the most portable version while
> # still being able to support the CPU features required for DPDK.
> # This can be bumped up by the DPDK project, but it can never be an #
> invariant like 'native'
> -if machine == 'default'
> +if machine == 'default' or machine == 'generic'
> if host_machine.cpu_family().startswith('x86')
> # matches the old pre-meson build systems default
> machine = 'corei7'
> @@ -82,7 +83,7 @@ if machine == 'default'
> machine = 'armv7-a'
> elif host_machine.cpu_family().startswith('aarch')
> # arm64 manages defaults in config/arm/meson.build
> - machine = 'default'
> + machine = 'generic'
> elif host_machine.cpu_family().startswith('ppc')
> machine = 'power8'
> endif
> diff --git a/doc/guides/prog_guide/build-sdk-meson.rst
> b/doc/guides/prog_guide/build-sdk-meson.rst
> index 3429e2647..c7e12eedf 100644
> --- a/doc/guides/prog_guide/build-sdk-meson.rst
> +++ b/doc/guides/prog_guide/build-sdk-meson.rst
> @@ -85,7 +85,7 @@ Project-specific options are passed used -
> Doption=value::
>
> meson -Denable_docs=true fullbuild # build and install docs
>
> - meson -Dmachine=default # use builder-independent baseline -
> march
> + meson -Dmachine=generic # use builder-independent baseline -
> march
>
> meson -Ddisable_drivers=event/*,net/tap # disable tap driver and all
> # eventdev PMDs for a smaller build
> @@ -114,7 +114,7 @@ Examples of setting some of the same options using
> meson configure::
> re-scan from meson.
>
> .. note::
> - machine=default uses a config that works on all supported architectures
> + machine=generic uses a config that works on all supported
> + architectures
> regardless of the capabilities of the machine where the build is
> happening.
>
> As well as those settings taken from ``meson configure``, other options diff --
> git a/meson_options.txt b/meson_options.txt index 9bf18ab6b..ce23289e3
> 100644
> --- a/meson_options.txt
> +++ b/meson_options.txt
> @@ -23,7 +23,7 @@ option('kernel_dir', type: 'string', value: '',
> option('lib_musdk_dir', type: 'string', value: '',
> description: 'path to the MUSDK library installation directory')
> option('machine', type: 'string', value: 'native',
> - description: 'set the target machine type')
> + description: 'set the target machine type. Set to generic for a build
> +usable on most machines of the build machine architecture, set to
^^^^ all
> +native to let the compiler choose the best fit for the build machine.')
How about: native to let the compiler choose the attributes of the build machine
Otherwise, it looks good to me.
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli at arm.com>
> option('max_ethports', type: 'integer', value: 32,
> description: 'maximum number of Ethernet devices')
> option('max_lcores', type: 'integer', value: 128,
> --
> 2.20.1
More information about the dev
mailing list