[dpdk-dev] [PATCH 4/7] examples/performance-thread/l3fwd-thread: enhance getopt_long usage

Ibtisam Tariq ibtisam.tariq at emumba.com
Wed Nov 11 09:15:04 CET 2020


Instead of using getopt_long return value, strcmp was used to
compare the input parameters with the struct option array. This
patch get rid of all those strcmp by directly binding each longopt
with an int enum. This is to improve readability and consistency in
all examples.

Bugzilla ID: 238
Cc: ian.betts at intel.com

Reported-by: David Marchand <david.marchand at redhat.com>
Signed-off-by: Ibtisam Tariq <ibtisam.tariq at emumba.com>
---
v2
* Remove extra indentations.
* Remove extra block brackets in switch statement.
* Change enum names to start with OPT_ and remove KEYWORD from enum names.

v1
* enhance getopt_long usage
---
 .../performance-thread/l3fwd-thread/main.c    | 210 +++++++++---------
 1 file changed, 106 insertions(+), 104 deletions(-)

diff --git a/examples/performance-thread/l3fwd-thread/main.c b/examples/performance-thread/l3fwd-thread/main.c
index 7bf61db6b..c75d2a4a3 100644
--- a/examples/performance-thread/l3fwd-thread/main.c
+++ b/examples/performance-thread/l3fwd-thread/main.c
@@ -2858,18 +2858,28 @@ parse_eth_dest(const char *optarg)
 		dest[c] = peer_addr[c];
 	*(uint64_t *)(val_eth + portid) = dest_eth_addr[portid];
 }
-
-#define CMD_LINE_OPT_RX_CONFIG "rx"
-#define CMD_LINE_OPT_TX_CONFIG "tx"
-#define CMD_LINE_OPT_STAT_LCORE "stat-lcore"
-#define CMD_LINE_OPT_ETH_DEST "eth-dest"
-#define CMD_LINE_OPT_NO_NUMA "no-numa"
-#define CMD_LINE_OPT_IPV6 "ipv6"
-#define CMD_LINE_OPT_ENABLE_JUMBO "enable-jumbo"
-#define CMD_LINE_OPT_HASH_ENTRY_NUM "hash-entry-num"
-#define CMD_LINE_OPT_NO_LTHREADS "no-lthreads"
-#define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype"
-
+enum {
+#define OPT_RX_CONFIG "rx"
+	OPT_RX_CONFIG_NUM = 256,
+#define OPT_TX_CONFIG "tx"
+	OPT_TX_CONFIG_NUM,
+#define OPT_STAT_LCORE "stat-lcore"
+	OPT_STAT_LCORE_NUM,
+#define OPT_ETH_DEST "eth-dest"
+	OPT_ETH_DEST_NUM,
+#define OPT_NO_NUMA "no-numa"
+	OPT_NO_NUMA_NUM,
+#define OPT_IPV6 "ipv6"
+	OPT_IPV6_NUM,
+#define OPT_ENABLE_JUMBO "enable-jumbo"
+	OPT_ENABLE_JUMBO_NUM,
+#define OPT_HASH_ENTRY_NUM "hash-entry-num"
+	OPT_HASH_ENTRY_NUM_NUM,
+#define OPT_NO_LTHREADS "no-lthreads"
+	OPT_NO_LTHREADS_NUM,
+#define OPT_PARSE_PTYPE "parse-ptype"
+	OPT_PARSE_PTYPE_NUM,
+};
 /* Parse the argument given in the command line of the application */
 static int
 parse_args(int argc, char **argv)
@@ -2879,17 +2889,17 @@ parse_args(int argc, char **argv)
 	int option_index;
 	char *prgname = argv[0];
 	static struct option lgopts[] = {
-		{CMD_LINE_OPT_RX_CONFIG, 1, 0, 0},
-		{CMD_LINE_OPT_TX_CONFIG, 1, 0, 0},
-		{CMD_LINE_OPT_STAT_LCORE, 1, 0, 0},
-		{CMD_LINE_OPT_ETH_DEST, 1, 0, 0},
-		{CMD_LINE_OPT_NO_NUMA, 0, 0, 0},
-		{CMD_LINE_OPT_IPV6, 0, 0, 0},
-		{CMD_LINE_OPT_ENABLE_JUMBO, 0, 0, 0},
-		{CMD_LINE_OPT_HASH_ENTRY_NUM, 1, 0, 0},
-		{CMD_LINE_OPT_NO_LTHREADS, 0, 0, 0},
-		{CMD_LINE_OPT_PARSE_PTYPE, 0, 0, 0},
-		{NULL, 0, 0, 0}
+		{OPT_RX_CONFIG,      1, NULL, OPT_RX_CONFIG_NUM      },
+		{OPT_TX_CONFIG,      1, NULL, OPT_TX_CONFIG_NUM      },
+		{OPT_STAT_LCORE,     1, NULL, OPT_STAT_LCORE_NUM     },
+		{OPT_ETH_DEST,       1, NULL, OPT_ETH_DEST_NUM       },
+		{OPT_NO_NUMA,        0, NULL, OPT_NO_NUMA_NUM        },
+		{OPT_IPV6,           0, NULL, OPT_IPV6_NUM           },
+		{OPT_ENABLE_JUMBO,   0, NULL, OPT_ENABLE_JUMBO_NUM   },
+		{OPT_HASH_ENTRY_NUM, 1, NULL, OPT_HASH_ENTRY_NUM_NUM },
+		{OPT_NO_LTHREADS,    0, NULL, OPT_NO_LTHREADS_NUM    },
+		{OPT_PARSE_PTYPE,    0, NULL, OPT_PARSE_PTYPE_NUM    },
+		{NULL,               0, 0,    0                      }
 	};
 
 	argvopt = argv;
@@ -2907,112 +2917,104 @@ parse_args(int argc, char **argv)
 				return -1;
 			}
 			break;
+
 		case 'P':
 			printf("Promiscuous mode selected\n");
 			promiscuous_on = 1;
 			break;
 
 		/* long options */
-		case 0:
-			if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_RX_CONFIG,
-				sizeof(CMD_LINE_OPT_RX_CONFIG))) {
-				ret = parse_rx_config(optarg);
-				if (ret) {
-					printf("invalid rx-config\n");
-					print_usage(prgname);
-					return -1;
-				}
+		case OPT_RX_CONFIG_NUM:
+			ret = parse_rx_config(optarg);
+			if (ret) {
+				printf("invalid rx-config\n");
+				print_usage(prgname);
+				return -1;
 			}
+			break;
 
-			if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_TX_CONFIG,
-				sizeof(CMD_LINE_OPT_TX_CONFIG))) {
-				ret = parse_tx_config(optarg);
-				if (ret) {
-					printf("invalid tx-config\n");
-					print_usage(prgname);
-					return -1;
-				}
+		case OPT_TX_CONFIG_NUM:
+			ret = parse_tx_config(optarg);
+			if (ret) {
+				printf("invalid tx-config\n");
+				print_usage(prgname);
+				return -1;
 			}
+			break;
 
 #if (APP_CPU_LOAD > 0)
-			if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_STAT_LCORE,
-					sizeof(CMD_LINE_OPT_STAT_LCORE))) {
-				cpu_load_lcore_id = parse_stat_lcore(optarg);
-			}
+		case OPT_STAT_LCORE_NUM:
+			cpu_load_lcore_id = parse_stat_lcore(optarg);
+			break;
 #endif
 
-			if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_ETH_DEST,
-				sizeof(CMD_LINE_OPT_ETH_DEST)))
-					parse_eth_dest(optarg);
+		case OPT_ETH_DEST_NUM:
+			parse_eth_dest(optarg);
+			break;
 
-			if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_NO_NUMA,
-				sizeof(CMD_LINE_OPT_NO_NUMA))) {
-				printf("numa is disabled\n");
-				numa_on = 0;
-			}
+		case OPT_NO_NUMA_NUM:
+			printf("numa is disabled\n");
+			numa_on = 0;
+			break;
 
 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
-			if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_IPV6,
-				sizeof(CMD_LINE_OPT_IPV6))) {
-				printf("ipv6 is specified\n");
-				ipv6 = 1;
-			}
+		case OPT_IPV6_NUM:
+			printf("ipv6 is specified\n");
+			ipv6 = 1;
+			break;
 #endif
 
-			if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_NO_LTHREADS,
-					sizeof(CMD_LINE_OPT_NO_LTHREADS))) {
-				printf("l-threads model is disabled\n");
-				lthreads_on = 0;
-			}
+		case OPT_NO_LTHREADS_NUM:
+			printf("l-threads model is disabled\n");
+			lthreads_on = 0;
+			break;
 
-			if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_PARSE_PTYPE,
-					sizeof(CMD_LINE_OPT_PARSE_PTYPE))) {
-				printf("software packet type parsing enabled\n");
-				parse_ptype_on = 1;
-			}
+		case OPT_PARSE_PTYPE_NUM:
+			printf("software packet type parsing enabled\n");
+			parse_ptype_on = 1;
+			break;
 
-			if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_ENABLE_JUMBO,
-				sizeof(CMD_LINE_OPT_ENABLE_JUMBO))) {
-				struct option lenopts = {"max-pkt-len", required_argument, 0,
-						0};
-
-				printf("jumbo frame is enabled - disabling simple TX path\n");
-				port_conf.rxmode.offloads |=
-						DEV_RX_OFFLOAD_JUMBO_FRAME;
-				port_conf.txmode.offloads |=
-						DEV_TX_OFFLOAD_MULTI_SEGS;
-
-				/* if no max-pkt-len set, use the default value
-				 * RTE_ETHER_MAX_LEN
-				 */
-				if (0 == getopt_long(argc, argvopt, "", &lenopts,
-						&option_index)) {
-
-					ret = parse_max_pkt_len(optarg);
-					if ((ret < 64) || (ret > MAX_JUMBO_PKT_LEN)) {
-						printf("invalid packet length\n");
-						print_usage(prgname);
-						return -1;
-					}
-					port_conf.rxmode.max_rx_pkt_len = ret;
-				}
-				printf("set jumbo frame max packet length to %u\n",
-						(unsigned int)port_conf.rxmode.max_rx_pkt_len);
-			}
-#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
-			if (!strncmp(lgopts[option_index].name, CMD_LINE_OPT_HASH_ENTRY_NUM,
-				sizeof(CMD_LINE_OPT_HASH_ENTRY_NUM))) {
-				ret = parse_hash_entry_number(optarg);
-				if ((ret > 0) && (ret <= L3FWD_HASH_ENTRIES)) {
-					hash_entry_number = ret;
-				} else {
-					printf("invalid hash entry number\n");
+		case OPT_ENABLE_JUMBO_NUM:
+		{
+			struct option lenopts = {"max-pkt-len",
+					required_argument, 0, 0};
+
+			printf("jumbo frame is enabled - disabling simple TX path\n");
+			port_conf.rxmode.offloads |=
+					DEV_RX_OFFLOAD_JUMBO_FRAME;
+			port_conf.txmode.offloads |=
+					DEV_TX_OFFLOAD_MULTI_SEGS;
+
+			/* if no max-pkt-len set, use the default value
+			 * RTE_ETHER_MAX_LEN
+			 */
+			if (0 == getopt_long(argc, argvopt, "", &lenopts,
+					&option_index)) {
+
+				ret = parse_max_pkt_len(optarg);
+				if ((ret < 64) || (ret > MAX_JUMBO_PKT_LEN)) {
+					printf("invalid packet length\n");
 					print_usage(prgname);
 					return -1;
 				}
+				port_conf.rxmode.max_rx_pkt_len = ret;
 			}
-#endif
+			printf("set jumbo frame max packet length to %u\n",
+				(unsigned int)port_conf.rxmode.max_rx_pkt_len);
 			break;
+		}
+#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
+		case OPT_HASH_ENTRY_NUM_NUM:
+			ret = parse_hash_entry_number(optarg);
+			if ((ret > 0) && (ret <= L3FWD_HASH_ENTRIES)) {
+				hash_entry_number = ret;
+			} else {
+				printf("invalid hash entry number\n");
+				print_usage(prgname);
+				return -1;
+			}
+			break;
+#endif
 
 		default:
 			print_usage(prgname);
-- 
2.17.1



More information about the dev mailing list