[dpdk-dev] [PATCH v4 3/6] app/testpmd: remove restriction on txpkts set
Thomas Monjalon
thomas at monjalon.net
Tue Nov 24 11:27:51 CET 2020
Is it OK to keep this regression?
Ferruh, what do you suggest?
23/11/2020 12:50, Slava Ovsiienko:
> Hi, Wei
>
> It was found this patch rejects the --txpkts command line settings.
> set_tx_pkt_segments() is called before device started and
> we have failure chain:
>
> set_tx_pkt_segments()
> nb_segs_is_invalid()
> get_tx_ring_size ()
> rte_eth_tx_queue_info_get()
>
> It causes --txpkts testpmd command line option is ignored.
>
> With best regards, Slava
>
> > -----Original Message-----
> > From: dev <dev-bounces at dpdk.org> On Behalf Of Wei Hu (Xavier)
> > Sent: Friday, September 25, 2020 15:47
> > To: dev at dpdk.org
> > Cc: xavier.huwei at huawei.com
> > Subject: [dpdk-dev] [PATCH v4 3/6] app/testpmd: remove restriction on txpkts
> > set
> >
> > From: Chengchang Tang <tangchengchang at huawei.com>
> >
> > Currently, if nb_txd is not set, the txpkts is not allowed to be set because the
> > nb_txd is used to avoid the numer of segments exceed the Tx ring size and the
> > default value of nb_txd is 0. And there is a bug that nb_txd is the global
> > configuration for Tx ring size and the ring size could be changed by some
> > command per queue. So these valid check is unreliable and introduced
> > unnecessary constraints.
> >
> > This patch adds a valid check function to use the real Tx ring size to check the
> > validity of txpkts.
> >
> > Fixes: af75078fece3 ("first public release")
> > Cc: stable at dpdk.org
> >
> > Signed-off-by: Chengchang Tang <tangchengchang at huawei.com>
> > Signed-off-by: Wei Hu (Xavier) <xavier.huwei at huawei.com>
> > ---
> > v3 -> v4:
> > add check 'rte_eth_rx_queue_info_get()' return value and
> > if it is '-ENOSTUP' calculate the 'ring_size'.
> > v3: initial version.
> > ---
> > app/test-pmd/config.c | 64
> > +++++++++++++++++++++++++++++++++++++++++++++++----
> > 1 file changed, 60 insertions(+), 4 deletions(-)
> >
> > diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index
> > 6496d2f..8ebb927 100644
> > --- a/app/test-pmd/config.c
> > +++ b/app/test-pmd/config.c
> > @@ -1893,6 +1893,38 @@ tx_queue_id_is_invalid(queueid_t txq_id) }
> >
> > static int
> > +get_tx_ring_size(portid_t port_id, queueid_t txq_id, uint16_t
> > +*ring_size) {
> > + struct rte_port *port = &ports[port_id];
> > + struct rte_eth_txq_info tx_qinfo;
> > + int ret;
> > +
> > + ret = rte_eth_tx_queue_info_get(port_id, txq_id, &tx_qinfo);
> > + if (ret == 0) {
> > + *ring_size = tx_qinfo.nb_desc;
> > + return ret;
> > + }
> > +
> > + if (ret != -ENOTSUP)
> > + return ret;
> > + /*
> > + * If the rte_eth_tx_queue_info_get is not support for this PMD,
> > + * ring_size stored in testpmd will be used for validity verification.
> > + * When configure the txq by rte_eth_tx_queue_setup with
> > nb_tx_desc
> > + * being 0, it will use a default value provided by PMDs to setup this
> > + * txq. If the default value is 0, it will use the
> > + * RTE_ETH_DEV_FALLBACK_TX_RINGSIZE to setup this txq.
> > + */
> > + if (port->nb_tx_desc[txq_id])
> > + *ring_size = port->nb_tx_desc[txq_id];
> > + else if (port->dev_info.default_txportconf.ring_size)
> > + *ring_size = port->dev_info.default_txportconf.ring_size;
> > + else
> > + *ring_size = RTE_ETH_DEV_FALLBACK_TX_RINGSIZE;
> > + return 0;
> > +}
> > +
> > +static int
> > rx_desc_id_is_invalid(uint16_t rxdesc_id) {
> > if (rxdesc_id < nb_rxd)
> > @@ -2986,17 +3018,41 @@ show_tx_pkt_segments(void)
> > printf("Split packet: %s\n", split);
> > }
> >
> > +static bool
> > +nb_segs_is_invalid(unsigned int nb_segs) {
> > + uint16_t ring_size;
> > + uint16_t queue_id;
> > + uint16_t port_id;
> > + int ret;
> > +
> > + RTE_ETH_FOREACH_DEV(port_id) {
> > + for (queue_id = 0; queue_id < nb_txq; queue_id++) {
> > + ret = get_tx_ring_size(port_id, queue_id, &ring_size);
> > +
> > + if (ret)
> > + return true;
> > +
> > + if (ring_size < nb_segs) {
> > + printf("nb segments per TX packets=%u >= "
> > + "TX queue(%u) ring_size=%u - ignored\n",
> > + nb_segs, queue_id, ring_size);
> > + return true;
> > + }
> > + }
> > + }
> > +
> > + return false;
> > +}
> > +
> > void
> > set_tx_pkt_segments(unsigned *seg_lengths, unsigned nb_segs) {
> > uint16_t tx_pkt_len;
> > unsigned i;
> >
> > - if (nb_segs >= (unsigned) nb_txd) {
> > - printf("nb segments per TX packets=%u >= nb_txd=%u -
> > ignored\n",
> > - nb_segs, (unsigned int) nb_txd);
> > + if (nb_segs_is_invalid(nb_segs))
> > return;
> > - }
> >
> > /*
> > * Check that each segment length is greater or equal than
> > --
> > 2.9.5
>
>
More information about the dev
mailing list