[dpdk-dev] [PATCH v4 3/6] app/testpmd: remove restriction on txpkts set
Ferruh Yigit
ferruh.yigit at intel.com
Wed Nov 25 15:06:48 CET 2020
On 11/24/2020 12:23 PM, Ferruh Yigit wrote:
> On 11/24/2020 10:27 AM, Thomas Monjalon wrote:
>> Is it OK to keep this regression?
>>
>> Ferruh, what do you suggest?
>>
>
> I confirm the '--txpkts' parameter is broken now, I suggest submitting a defect
> for it and continue with the regression.
>
Hi Slava,
Can you please submit the Bugzilla defect?
Thanks,
ferruh
> We have alternative for the parameter, "set txpkts <len0[,len1]*>" command.
> The parameter was only working when hardcoded '--txd=N' parameter is provided,
> the command is more dynamic and works however queue size is configured.
>
> We can fix the '--txpkts' in next release.
>
>>
>> 23/11/2020 12:50, Slava Ovsiienko:
>>> Hi, Wei
>>>
>>> It was found this patch rejects the --txpkts command line settings.
>>> set_tx_pkt_segments() is called before device started and
>>> we have failure chain:
>>>
>>> set_tx_pkt_segments()
>>> nb_segs_is_invalid()
>>> get_tx_ring_size ()
>>> rte_eth_tx_queue_info_get()
>>>
>>> It causes --txpkts testpmd command line option is ignored.
>>>
>>> With best regards, Slava
>>>
>>>> -----Original Message-----
>>>> From: dev <dev-bounces at dpdk.org> On Behalf Of Wei Hu (Xavier)
>>>> Sent: Friday, September 25, 2020 15:47
>>>> To: dev at dpdk.org
>>>> Cc: xavier.huwei at huawei.com
>>>> Subject: [dpdk-dev] [PATCH v4 3/6] app/testpmd: remove restriction on txpkts
>>>> set
>>>>
>>>> From: Chengchang Tang <tangchengchang at huawei.com>
>>>>
>>>> Currently, if nb_txd is not set, the txpkts is not allowed to be set because
>>>> the
>>>> nb_txd is used to avoid the numer of segments exceed the Tx ring size and the
>>>> default value of nb_txd is 0. And there is a bug that nb_txd is the global
>>>> configuration for Tx ring size and the ring size could be changed by some
>>>> command per queue. So these valid check is unreliable and introduced
>>>> unnecessary constraints.
>>>>
>>>> This patch adds a valid check function to use the real Tx ring size to check
>>>> the
>>>> validity of txpkts.
>>>>
>>>> Fixes: af75078fece3 ("first public release")
>>>> Cc: stable at dpdk.org
>>>>
>>>> Signed-off-by: Chengchang Tang <tangchengchang at huawei.com>
>>>> Signed-off-by: Wei Hu (Xavier) <xavier.huwei at huawei.com>
>>>> ---
>>>> v3 -> v4:
>>>> add check 'rte_eth_rx_queue_info_get()' return value and
>>>> if it is '-ENOSTUP' calculate the 'ring_size'.
>>>> v3: initial version.
>>>> ---
>>>> app/test-pmd/config.c | 64
>>>> +++++++++++++++++++++++++++++++++++++++++++++++----
>>>> 1 file changed, 60 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c index
>>>> 6496d2f..8ebb927 100644
>>>> --- a/app/test-pmd/config.c
>>>> +++ b/app/test-pmd/config.c
>>>> @@ -1893,6 +1893,38 @@ tx_queue_id_is_invalid(queueid_t txq_id) }
>>>>
>>>> static int
>>>> +get_tx_ring_size(portid_t port_id, queueid_t txq_id, uint16_t
>>>> +*ring_size) {
>>>> + struct rte_port *port = &ports[port_id];
>>>> + struct rte_eth_txq_info tx_qinfo;
>>>> + int ret;
>>>> +
>>>> + ret = rte_eth_tx_queue_info_get(port_id, txq_id, &tx_qinfo);
>>>> + if (ret == 0) {
>>>> + *ring_size = tx_qinfo.nb_desc;
>>>> + return ret;
>>>> + }
>>>> +
>>>> + if (ret != -ENOTSUP)
>>>> + return ret;
>>>> + /*
>>>> + * If the rte_eth_tx_queue_info_get is not support for this PMD,
>>>> + * ring_size stored in testpmd will be used for validity verification.
>>>> + * When configure the txq by rte_eth_tx_queue_setup with
>>>> nb_tx_desc
>>>> + * being 0, it will use a default value provided by PMDs to setup this
>>>> + * txq. If the default value is 0, it will use the
>>>> + * RTE_ETH_DEV_FALLBACK_TX_RINGSIZE to setup this txq.
>>>> + */
>>>> + if (port->nb_tx_desc[txq_id])
>>>> + *ring_size = port->nb_tx_desc[txq_id];
>>>> + else if (port->dev_info.default_txportconf.ring_size)
>>>> + *ring_size = port->dev_info.default_txportconf.ring_size;
>>>> + else
>>>> + *ring_size = RTE_ETH_DEV_FALLBACK_TX_RINGSIZE;
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int
>>>> rx_desc_id_is_invalid(uint16_t rxdesc_id) {
>>>> if (rxdesc_id < nb_rxd)
>>>> @@ -2986,17 +3018,41 @@ show_tx_pkt_segments(void)
>>>> printf("Split packet: %s\n", split);
>>>> }
>>>>
>>>> +static bool
>>>> +nb_segs_is_invalid(unsigned int nb_segs) {
>>>> + uint16_t ring_size;
>>>> + uint16_t queue_id;
>>>> + uint16_t port_id;
>>>> + int ret;
>>>> +
>>>> + RTE_ETH_FOREACH_DEV(port_id) {
>>>> + for (queue_id = 0; queue_id < nb_txq; queue_id++) {
>>>> + ret = get_tx_ring_size(port_id, queue_id, &ring_size);
>>>> +
>>>> + if (ret)
>>>> + return true;
>>>> +
>>>> + if (ring_size < nb_segs) {
>>>> + printf("nb segments per TX packets=%u >= "
>>>> + "TX queue(%u) ring_size=%u - ignored\n",
>>>> + nb_segs, queue_id, ring_size);
>>>> + return true;
>>>> + }
>>>> + }
>>>> + }
>>>> +
>>>> + return false;
>>>> +}
>>>> +
>>>> void
>>>> set_tx_pkt_segments(unsigned *seg_lengths, unsigned nb_segs) {
>>>> uint16_t tx_pkt_len;
>>>> unsigned i;
>>>>
>>>> - if (nb_segs >= (unsigned) nb_txd) {
>>>> - printf("nb segments per TX packets=%u >= nb_txd=%u -
>>>> ignored\n",
>>>> - nb_segs, (unsigned int) nb_txd);
>>>> + if (nb_segs_is_invalid(nb_segs))
>>>> return;
>>>> - }
>>>>
>>>> /*
>>>> * Check that each segment length is greater or equal than
>>>> --
>>>> 2.9.5
>>>
>>>
>>
>>
>>
>>
>>
>
More information about the dev
mailing list