[dpdk-dev] [PATCH 1/2] eal/arm: fix gcc build for optimization level 0

David Marchand david.marchand at redhat.com
Fri Nov 27 10:45:19 CET 2020


On Fri, Nov 27, 2020 at 10:34 AM Jerin Jacob <jerinjacobk at gmail.com> wrote:
>
> On Fri, Nov 27, 2020 at 2:56 PM David Marchand
> <david.marchand at redhat.com> wrote:
> >
> > On Fri, Nov 27, 2020 at 9:51 AM Jerin Jacob <jerinjacobk at gmail.com> wrote:
> > >
> > > On Fri, Nov 27, 2020 at 2:09 PM David Marchand
> > > <david.marchand at redhat.com> wrote:
> > > >
> > > > On Fri, Nov 27, 2020 at 9:10 AM Ruifeng Wang <ruifeng.wang at arm.com> wrote:
> > > > >
> > > > > Gcc build with '-O0' on platforms with RTE_ARM_FEATURE_ATOMICS set
> > > > > failed for:
> > > > >  ../lib/librte_efd/rte_efd.c
> > > > >  Assembler messages:
> > > > > 3866: Error: selected processor does not support `crc32cb w0,w0,w1'
> > > > > 3890: Error: selected processor does not support `crc32ch w0,w0,w1'
> > > > > 3914: Error: selected processor does not support `crc32cw w0,w0,w1'
> > > > > 3938: Error: selected processor does not support `crc32cx w0,w0,x1'
> > > > >
> > > > > This was caused by an architecture specifier added for Clang.
> > > > > Unlike Clang, Gcc considers each inline assembly block to be dependent
> > > > > and therefor, the architecture specifier impacts assemble of some
> > > > > blocks require certain extension support.
> > > >
> > > > I reproduced this error with -O0 for config/arm/arm64_octeontx2_linux_gcc.
> > > > The patch looks simple enough and it only affects ARM builds.
> > > >
> > > > Jerin,
> > > > Are you okay with this change for 20.11?
> > > > Or should we wait 21.02?
> > >
> > > I could reproduce the issue with meson  build -Dbuildtype=debug
> > > --cross-file config/arm/arm64_octeontx2_linux_gcc
> > >
> > > This fix is OK. Request to merge for 20.11
> > >
> > > Acked-by: Jerin Jacob <jerinj at marvell.com>
> >
> > Ruifeng, Andrew,
> >
> > I get a compilation error with this patch on sfc using gcc and
> > config/arm/arm64_octeontx2_linux_gcc config + --buildtype=debug and/or
> > -Dc_args=-O0 .
> >
> > aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture
> > 8.2-2019.01 (arm-rel-8.28)) 8.2.1 20180802
> >
> > FAILED: drivers/common/sfc_efx/base/932d09a@@sfc_base at sta/efx_crc32.c.o
> > aarch64-linux-gnu-gcc
> > -Idrivers/common/sfc_efx/base/932d09a@@sfc_base at sta
> > -Idrivers/common/sfc_efx/base -I../../dpdk/drivers/common/sfc_efx/base
> > -Idrivers/common/sfc_efx -I../../dpdk/drivers/common/sfc_efx -I.
> > -I../../dpdk/ -Iconfig -I../../dpdk/config -Ilib/librte_eal/include
> > -I../../dpdk/lib/librte_eal/include -Ilib/librte_eal/linux/include
> > -I../../dpdk/lib/librte_eal/linux/include -Ilib/librte_eal/arm/include
> > -I../../dpdk/lib/librte_eal/arm/include -Ilib/librte_eal/common
> > -I../../dpdk/lib/librte_eal/common -Ilib/librte_eal
> > -I../../dpdk/lib/librte_eal -Ilib/librte_kvargs
> > -I../../dpdk/lib/librte_kvargs
> > -Ilib/librte_telemetry/../librte_metrics
> > -I../../dpdk/lib/librte_telemetry/../librte_metrics
> > -Ilib/librte_telemetry -I../../dpdk/lib/librte_telemetry
> > -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall
> > -Winvalid-pch -Werror -g -include rte_config.h -Wextra -Wcast-qual
> > -Wdeprecated -Wformat -Wformat-nonliteral -Wformat-security
> > -Wmissing-declarations -Wmissing-prototypes -Wnested-externs
> > -Wold-style-definition -Wpointer-arith -Wsign-compare
> > -Wstrict-prototypes -Wundef -Wwrite-strings -Wno-packed-not-aligned
> > -Wno-missing-field-initializers -D_GNU_SOURCE -fPIC
> > -march=armv8.2-a+crc+crypto+lse -DALLOW_EXPERIMENTAL_API
> > -DALLOW_INTERNAL_API -Wno-format-truncation -Wdisabled-optimization
> > -Waggregate-return -Wbad-function-cast -Wno-sign-compare
> > -Wno-unused-parameter -Wno-unused-variable -Wno-empty-body
> > -Wno-unused-but-set-variable -MD -MQ
> > 'drivers/common/sfc_efx/base/932d09a@@sfc_base at sta/efx_crc32.c.o' -MF
> > 'drivers/common/sfc_efx/base/932d09a@@sfc_base at sta/efx_crc32.c.o.d' -o
> > 'drivers/common/sfc_efx/base/932d09a@@sfc_base at sta/efx_crc32.c.o' -c
> > ../../dpdk/drivers/common/sfc_efx/base/efx_crc32.c
> > In file included from ../../dpdk/lib/librte_eal/arm/include/rte_atomic.h:9,
> >                  from ../../dpdk/lib/librte_eal/include/generic/rte_pause.h:19,
> >                  from ../../dpdk/lib/librte_eal/arm/include/rte_pause_64.h:19,
> >                  from ../../dpdk/lib/librte_eal/arm/include/rte_pause.h:13,
> >                  from
> > ../../dpdk/lib/librte_eal/include/generic/rte_spinlock.h:25,
> >                  from ../../dpdk/lib/librte_eal/arm/include/rte_spinlock.h:17,
> >                  from ../../dpdk/drivers/common/sfc_efx/efsys.h:15,
> >                  from ../../dpdk/drivers/common/sfc_efx/base/efx.h:11,
> >                  from ../../dpdk/drivers/common/sfc_efx/base/efx_crc32.c:7:
> > ../../dpdk/lib/librte_eal/arm/include/rte_atomic_64.h: In function
> > ‘__cas_128_relaxed’:
> > ../../dpdk/lib/librte_eal/arm/include/rte_atomic_64.h:81:20: error:
> > function returns an aggregate [-Werror=aggregate-return]
> >  __ATOMIC128_CAS_OP(__cas_128_relaxed, "casp")
> >                     ^~~~~~~~~~~~~~~~~
> > ../../dpdk/lib/librte_eal/arm/include/rte_atomic_64.h:57:1: note: in
> > definition of macro ‘__ATOMIC128_CAS_OP’
> >  cas_op_name(rte_int128_t *dst, rte_int128_t old, rte_int128_t updated)      \
> >  ^~~~~~~~~~~
> > ../../dpdk/lib/librte_eal/arm/include/rte_atomic_64.h: In function
> > ‘__cas_128_acquire’:
> > ../../dpdk/lib/librte_eal/arm/include/rte_atomic_64.h:82:20: error:
> > function returns an aggregate [-Werror=aggregate-return]
> >  __ATOMIC128_CAS_OP(__cas_128_acquire, "caspa")
> >                     ^~~~~~~~~~~~~~~~~
> > ../../dpdk/lib/librte_eal/arm/include/rte_atomic_64.h:57:1: note: in
> > definition of macro ‘__ATOMIC128_CAS_OP’
> >  cas_op_name(rte_int128_t *dst, rte_int128_t old, rte_int128_t updated)      \
> >  ^~~~~~~~~~~
> > ../../dpdk/lib/librte_eal/arm/include/rte_atomic_64.h: In function
> > ‘__cas_128_release’:
> > ../../dpdk/lib/librte_eal/arm/include/rte_atomic_64.h:83:20: error:
> > function returns an aggregate [-Werror=aggregate-return]
> >  __ATOMIC128_CAS_OP(__cas_128_release, "caspl")
> >                     ^~~~~~~~~~~~~~~~~
> > ../../dpdk/lib/librte_eal/arm/include/rte_atomic_64.h:57:1: note: in
> > definition of macro ‘__ATOMIC128_CAS_OP’
> >  cas_op_name(rte_int128_t *dst, rte_int128_t old, rte_int128_t updated)      \
> >  ^~~~~~~~~~~
> > ../../dpdk/lib/librte_eal/arm/include/rte_atomic_64.h: In function
> > ‘__cas_128_acq_rel’:
> > ../../dpdk/lib/librte_eal/arm/include/rte_atomic_64.h:84:20: error:
> > function returns an aggregate [-Werror=aggregate-return]
> >  __ATOMIC128_CAS_OP(__cas_128_acq_rel, "caspal")
> >                     ^~~~~~~~~~~~~~~~~
> > ../../dpdk/lib/librte_eal/arm/include/rte_atomic_64.h:57:1: note: in
> > definition of macro ‘__ATOMIC128_CAS_OP’
> >  cas_op_name(rte_int128_t *dst, rte_int128_t old, rte_int128_t updated)      \
> >  ^~~~~~~~~~~
> > cc1: all warnings being treated as errors
> >
> >
> > If I waive those warnings:
> > - next to fail is net/igc (fixed by next patch so ok)
> > - and then next to fail is net/sfc.
>
> Regarding the net/sfc build, Could try clean build.(I got the warning first,
> after the clean build, it is OK)

That's what I first thought too, then I noticed that
test-meson-builds.sh had switched back my build dir to debugoptimized.


>From scratch:

The Meson build system
Version: 0.52.0
Source dir: /home/dmarchan/dpdk
Build dir: /home/dmarchan/builds/build-arm64-octeontx2
Build type: cross build
Program cat found: YES (/usr/bin/cat)
Project name: DPDK
Project version: 20.11.0-rc5
Appending CFLAGS from environment: '-Werror'
C compiler for the build machine: ccache gcc (gcc 9.3.1 "gcc (GCC)
9.3.1 20200408 (Red Hat 9.3.1-2)")
C linker for the build machine: GNU ld.bfd 2.32-33
C compiler for the host machine: aarch64-linux-gnu-gcc (gcc 8.2.1
"aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture
8.2-2019.01 (arm-rel-8.28)) 8.2.1 20180802")
C linker for the host machine: GNU ld.bfd 8.2-2019
Build machine cpu family: x86_64
Build machine cpu: x86_64
Host machine cpu family: aarch64
Host machine cpu: armv8-a
Target machine cpu family: aarch64
Target machine cpu: armv8-a
...
Option buildtype is: debug [default: release]
Option default_library is: shared [default: static]
Found ninja-1.9.0 at /usr/bin/ninja
ninja: Entering directory `/home/dmarchan/builds/build-arm64-octeontx2'
[479/2558] Compiling C object
'drivers/common/sfc_efx/base/932d09a@@sfc_base at sta/efx_bootcfg.c.o'.
FAILED: drivers/common/sfc_efx/base/932d09a@@sfc_base at sta/efx_bootcfg.c.o
aarch64-linux-gnu-gcc
-Idrivers/common/sfc_efx/base/932d09a@@sfc_base at sta
-Idrivers/common/sfc_efx/base -I../../dpdk/drivers/common/sfc_efx/base
-Idrivers/common/sfc_efx -I../../dpdk/drivers/common/sfc_efx -I.
-I../../dpdk/ -Iconfig -I../../dpdk/config -Ilib/librte_eal/include
-I../../dpdk/lib/librte_eal/include -Ilib/librte_eal/linux/include
-I../../dpdk/lib/librte_eal/linux/include -Ilib/librte_eal/arm/include
-I../../dpdk/lib/librte_eal/arm/include -Ilib/librte_eal/common
-I../../dpdk/lib/librte_eal/common -Ilib/librte_eal
-I../../dpdk/lib/librte_eal -Ilib/librte_kvargs
-I../../dpdk/lib/librte_kvargs
-Ilib/librte_telemetry/../librte_metrics
-I../../dpdk/lib/librte_telemetry/../librte_metrics
-Ilib/librte_telemetry -I../../dpdk/lib/librte_telemetry
-fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall
-Winvalid-pch -Werror -g -include rte_config.h -Wextra -Wcast-qual
-Wdeprecated -Wformat -Wformat-nonliteral -Wformat-security
-Wmissing-declarations -Wmissing-prototypes -Wnested-externs
-Wold-style-definition -Wpointer-arith -Wsign-compare
-Wstrict-prototypes -Wundef -Wwrite-strings -Wno-packed-not-aligned
-Wno-missing-field-initializers -D_GNU_SOURCE -fPIC
-march=armv8.2-a+crc+crypto+lse -DALLOW_EXPERIMENTAL_API
-DALLOW_INTERNAL_API -Wno-format-truncation -Wdisabled-optimization
-Waggregate-return -Wbad-function-cast -Wno-sign-compare
-Wno-unused-parameter -Wno-unused-variable -Wno-empty-body
-Wno-unused-but-set-variable -MD -MQ
'drivers/common/sfc_efx/base/932d09a@@sfc_base at sta/efx_bootcfg.c.o'
-MF 'drivers/common/sfc_efx/base/932d09a@@sfc_base at sta/efx_bootcfg.c.o.d'
-o 'drivers/common/sfc_efx/base/932d09a@@sfc_base at sta/efx_bootcfg.c.o'
-c ../../dpdk/drivers/common/sfc_efx/base/efx_bootcfg.c
In file included from ../../dpdk/lib/librte_eal/arm/include/rte_atomic.h:9,
                 from ../../dpdk/lib/librte_eal/include/generic/rte_pause.h:19,
                 from ../../dpdk/lib/librte_eal/arm/include/rte_pause_64.h:19,
                 from ../../dpdk/lib/librte_eal/arm/include/rte_pause.h:13,
                 from
../../dpdk/lib/librte_eal/include/generic/rte_spinlock.h:25,
                 from ../../dpdk/lib/librte_eal/arm/include/rte_spinlock.h:17,
                 from ../../dpdk/drivers/common/sfc_efx/efsys.h:15,
                 from ../../dpdk/drivers/common/sfc_efx/base/efx.h:11,
                 from ../../dpdk/drivers/common/sfc_efx/base/efx_bootcfg.c:7:
../../dpdk/lib/librte_eal/arm/include/rte_atomic_64.h: In function
‘__cas_128_relaxed’:
../../dpdk/lib/librte_eal/arm/include/rte_atomic_64.h:81:20: error:
function returns an aggregate [-Werror=aggregate-return]
 __ATOMIC128_CAS_OP(__cas_128_relaxed, "casp")
...


-- 
David Marchand



More information about the dev mailing list