[dpdk-dev] [PATCH v2] mbuf: extend meaning of QinQ stripped bit

[Olivier Matz]

From: Somnath Kotur <somnath.kotur at broadcom.com>

Clarify the documentation of QinQ flags, and extend the meaning of the
flag: if PKT_RX_QINQ_STRIPPED is set and PKT_RX_VLAN_STRIPPED is unset,
only the outer VLAN is removed from packet data, but both tci are saved
in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).

Signed-off-by: Somnath Kotur <somnath.kotur at broadcom.com>
Signed-off-by: Olivier Matz <olivier.matz at 6wind.com>
---

Hi,

Here is an update of this old patch from Somnath.

Olivier


v2:
- better reword PKT_RX_QINQ_STRIPPED documentation
- also update PKT_RX_QINQ documentation

 lib/librte_mbuf/rte_mbuf_core.h | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/lib/librte_mbuf/rte_mbuf_core.h b/lib/librte_mbuf/rte_mbuf_core.h
index 8c2c20644d..8f631b84cf 100644
--- a/lib/librte_mbuf/rte_mbuf_core.h
+++ b/lib/librte_mbuf/rte_mbuf_core.h
@@ -126,12 +126,19 @@ extern "C" {
 #define PKT_RX_FDIR_FLX      (1ULL << 14)
 
 /**
- * The 2 vlans have been stripped by the hardware and their tci are
- * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
- * This can only happen if vlan stripping is enabled in the RX
+ * The outer VLAN has been stripped by the hardware and its TCI is
+ * saved in mbuf->vlan_tci_outer.
+ * This can only happen if VLAN stripping is enabled in the Rx
  * configuration of the PMD.
- * When PKT_RX_QINQ_STRIPPED is set, the flags (PKT_RX_VLAN |
- * PKT_RX_VLAN_STRIPPED | PKT_RX_QINQ) must also be set.
+ * When PKT_RX_QINQ_STRIPPED is set, the flags PKT_RX_VLAN and PKT_RX_QINQ
+ * must also be set.
+ *
+ * - If both PKT_RX_QINQ_STRIPPED and PKT_RX_VLAN_STRIPPED are set, the 2 VLANs
+ *   have been stripped by the hardware and their TCIs are saved in
+ *   mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
+ * - If PKT_RX_QINQ_STRIPPED is set and PKT_RX_VLAN_STRIPPED is unset, only the
+ *   outer VLAN is removed from packet data, but both tci are saved in
+ *   mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
  */
 #define PKT_RX_QINQ_STRIPPED (1ULL << 15)
 
@@ -159,8 +166,8 @@ extern "C" {
 
 /**
  * The RX packet is a double VLAN, and the outer tci has been
- * saved in in mbuf->vlan_tci_outer. If PKT_RX_QINQ set, PKT_RX_VLAN
- * also should be set and inner tci should be saved to mbuf->vlan_tci.
+ * saved in mbuf->vlan_tci_outer. If this flag is set, PKT_RX_VLAN
+ * must also be set and the inner tci is saved in mbuf->vlan_tci.
  * If the flag PKT_RX_QINQ_STRIPPED is also present, both VLANs
  * headers have been stripped from mbuf data, else they are still
  * present.
-- 
2.25.1