[dpdk-dev] [PATCH v2 6/6] doc: update for two ports hairpin mode
Ori Kam
orika at nvidia.com
Thu Oct 8 11:47:26 CEST 2020
Hi Bing,
> -----Original Message-----
> From: Bing Zhao <bingz at nvidia.com>
> Sent: Thursday, October 8, 2020 11:52 AM
> Subject: [PATCH v2 6/6] doc: update for two ports hairpin mode
>
> In the release notes, 2 ports hairpin mode feature is added.
>
> In rte flow part, one suggestion is added to mention that metadata
> could be used to connect the hairpin RX and TX flows if the hairpin
> is working in explicit TX flow rule mode.
>
> In the testpmd command line, the new parameter to set hairpin working
> mode is described.
>
> Signed-off-by: Bing Zhao <bingz at nvidia.com>
> ---
> doc/guides/prog_guide/rte_flow.rst | 3 +++
> doc/guides/rel_notes/release_20_11.rst | 8 ++++++++
> doc/guides/testpmd_app_ug/run_app.rst | 8 ++++++++
> 3 files changed, 19 insertions(+)
>
> diff --git a/doc/guides/prog_guide/rte_flow.rst
> b/doc/guides/prog_guide/rte_flow.rst
> index 119b128..bb54d67 100644
> --- a/doc/guides/prog_guide/rte_flow.rst
> +++ b/doc/guides/prog_guide/rte_flow.rst
> @@ -2592,6 +2592,9 @@ set, unpredictable value will be seen depending on
> driver implementation. For
> loopback/hairpin packet, metadata set on Rx/Tx may or may not be
> propagated to
> the other path depending on HW capability.
>
> +In hairpin case with TX explicit flow mode, metadata could (not mandatory) be
> +used to connect the RX and TX flows if it can be propagated from RX to TX
> path.
> +
> .. _table_rte_flow_action_set_meta:
>
> .. table:: SET_META
> diff --git a/doc/guides/rel_notes/release_20_11.rst
> b/doc/guides/rel_notes/release_20_11.rst
> index 0b2a370..05ceea0 100644
> --- a/doc/guides/rel_notes/release_20_11.rst
> +++ b/doc/guides/rel_notes/release_20_11.rst
> @@ -109,6 +109,10 @@ New Features
> * Extern objects and functions can be plugged into the pipeline.
> * Transaction-oriented table updates.
>
> +* **Updated the ethdev library to support hairpin between two ports.**
> +
> + New APIs are introduced to support binding / unbinding 2 ports hairpin.
> + Hairpin TX part flow rules can be inserted explicitly.
>
> Removed Items
> -------------
> @@ -240,6 +244,10 @@ ABI Changes
>
> * ``ethdev`` internal functions are marked with ``__rte_internal`` tag.
>
> + * ``struct rte_eth_hairpin_conf`` has two new members:
> +
> + * ``uint32_t tx_explicit:1;``
> + * ``uint32_t manual_bind:1;``
>
> Known Issues
> ------------
> diff --git a/doc/guides/testpmd_app_ug/run_app.rst
> b/doc/guides/testpmd_app_ug/run_app.rst
> index e2539f6..4e627c4 100644
> --- a/doc/guides/testpmd_app_ug/run_app.rst
> +++ b/doc/guides/testpmd_app_ug/run_app.rst
> @@ -497,3 +497,11 @@ The command line options are:
> * ``--record-burst-stats``
>
> Enable display of RX and TX burst stats.
> +
> +* ``--hairpin-mode=0xXX``
> +
> + Set the hairpin port mode with bitmask, only valid when hairpin queues
> number is set.
> + bit 4 - explicit TX flow rule
> + bit 1 - two hairpin ports paired
> + bit 0 - two hairpin ports loop
> + The default value is 0. Hairpin will use single port mode and implicit TX flow
> mode.
> --
> 1.8.3.1
Acked-by: Ori Kam <orika at nvidia.com>
Thanks,
Ori
More information about the dev
mailing list