[dpdk-dev] [PATCH v7 1/2] ethdev: add flow shared action API
Andrey Vesnovaty
andreyv at nvidia.com
Tue Oct 13 22:06:36 CEST 2020
Hi Andrew.
Thanks for the input.
All spelling & rephrases will be applied PSB for the rest.
Will publish v8 very soon.
Thanks,
Andrey
> -----Original Message-----
> From: Andrew Rybchenko <Andrew.Rybchenko at oktetlabs.ru>
> Sent: Monday, October 12, 2020 5:19 PM
> To: Andrey Vesnovaty <andreyv at nvidia.com>; dev at dpdk.org
> Cc: jer at marvell.com; jerinjacobk at gmail.com; NBU-Contact-Thomas Monjalon
> <thomas at monjalon.net>; ferruh.yigit at intel.com;
> stephen at networkplumber.org; bruce.richardson at intel.com; Ori Kam
> <orika at nvidia.com>; Slava Ovsiienko <viacheslavo at nvidia.com>;
> andrey.vesnovaty at gmail.com; mdr at ashroe.eu; nhorman at tuxdriver.com;
> ajit.khaparde at broadcom.com; samik.gupta at broadcom.com
> Subject: Re: [dpdk-dev] [PATCH v7 1/2] ethdev: add flow shared action API
>
> "add flow shared action API"
>
> Is flow shared? May be "add shared actions to flow API".
Accepted, will update commit message.
>
> On 10/8/20 2:51 PM, Andrey Vesnovaty wrote:
> > This commit introduces extension of DPDK flow action API enabling
>
> "This commit" and "DPDK" are not necessary in description.
> It is a commit description and the patch is to DPDK tree.
> Consider just:
> "Introduce extension of flow action API enabling..."
Accepted, will update commit message.
>
> > sharing of single rte_flow_action in multiple flows. The API intended for
> > PMDs, where multiple HW offloaded flows can reuse the same HW
> > essence/object representing flow action and modification of such an
> > essence/object affects all the rules using it.
> >
> > Motivation and example
> > ===
> > Adding or removing one or more queues to RSS used by multiple flow rules
> > imposes per rule toll for current DPDK flow API; the scenario requires
> > for each flow sharing cloned RSS action:
> > - call `rte_flow_destroy()`
> > - call `rte_flow_create()` with modified RSS action
> >
> > API for sharing action and its in-place update benefits:
> > - reduce the overhead of multiple RSS flow rules reconfiguration
> > - optimize resource utilization by sharing action across multiple
> > flows
> >
> > Change description
> > ===
> >
> > Shared action
> > ===
> > In order to represent flow action shared by multiple flows new action
> > type RTE_FLOW_ACTION_TYPE_SHARED is introduced (see `enum
> > rte_flow_action_type`).
> > Actually the introduced API decouples action from any specific flow and
> > enables sharing of single action by its handle across multiple flows.
> >
> > Shared action create/use/destroy
> > ===
> > Shared action may be reused by some or none flow rules at any given
> > moment, i.e. shared action resides outside of the context of any flow.
> > Shared action represent HW resources/objects used for action offloading
> > implementation.
> > API for shared action create (see `rte_flow_shared_action_create()`):
> > - should allocate HW resources and make related initializations required
> > for shared action implementation.
> > - make necessary preparations to maintain shared access to
> > the action resources, configuration and state.
> > API for shared action destroy (see `rte_flow_shared_action_destroy()`)
> > should release HW resources and make related cleanups required for shared
> > action implementation.
> >
> > In order to share some flow action reuse the handle of type
> > `struct rte_flow_shared_action` returned by
> > rte_flow_shared_action_create() as a `conf` field of
> > `struct rte_flow_action` (see "example" section).
> >
> > If some shared action not used by any flow rule all resources allocated
> > by the shared action can be released by rte_flow_shared_action_destroy()
> > (see "example" section). The shared action handle passed as argument to
> > destroy API should not be used any further i.e. result of the usage is
> > undefined.
> >
> > Shared action re-configuration
> > ===
> > Shared action behavior defined by its configuration can be updated via
> > rte_flow_shared_action_update() (see "example" section). The shared
> > action update operation modifies HW related resources/objects allocated
> > on the action creation. The number of operations performed by the update
> > operation should not depend on the number of flows sharing the related
> > action. On return of shared action update API action behavior should be
> > according to updated configuration for all flows sharing the action.
> >
> > Shared action query
> > ===
> > Provide separate API to query shared action state (see
> > rte_flow_shared_action_update()). Taking a counter as an example: query
> > returns value aggregating all counter increments across all flow rules
> > sharing the counter. This API doesn't query shared action configuration
> > since it is controlled by rte_flow_shared_action_create() and
> > rte_flow_shared_action_update() APIs and no supposed to change by other
> > means.
> >
> > PMD support
> > ===
> > The support of introduced API is pure PMD specific design and
> > responsibility for each action type (see struct rte_flow_ops).
> >
> > testpmd
> > ===
> > In order to utilize introduced API testpmd cli may implement following
> > extension
> > create/update/destroy/query shared action accordingly
> >
> > flow shared_action (port) create {action_id (id)} (action) / end
> > flow shared_action (port) update (id) (action) / end
> > flow shared_action (port) destroy action_id (id) {action_id (id) [...]}
> > flow shared_action (port) query (id)
> >
> > testpmd example
> > ===
> >
> > configure rss to queues 1 & 2
> >
> >> flow shared_action 0 create action_id 100 rss queues 1 2 end / end
> >
> > create flow rule utilizing shared action
> >
> >> flow create 0 ingress \
> > pattern eth dst is 0c:42:a1:15:fd:ac / ipv6 / tcp / end \
> > actions shared 100 / end
> >
> > add 2 more queues
> >
> >> flow shared_action 0 modify 100 rss queues 1 2 3 4 end / end
>
> testpmd is out-of-scope of the patch and it is better to
> remove the description to avoid unsync if testpmd
> commands are changed.
There is still added value is testpmd example demonstrating usage of
shared action with rte flows. I will update the example to reflect the current
testpmd syntax for shared action.
>
> >
> > example
> > ===
> >
> > struct rte_flow_action actions[2];
> > struct rte_flow_shared_action_conf conf;
> > struct rte_flow_action action;
> > /* skipped: initialize conf and action */
> > struct rte_flow_shared_action *handle =
> > rte_flow_shared_action_create(port_id, &conf, &action, &error);
> > actions[0].type = RTE_FLOW_ACTION_TYPE_SHARED;
> > actions[0].conf = handle;
> > actions[1].type = RTE_FLOW_ACTION_TYPE_END;
> > /* skipped: init attr0 & pattern0 args */
> > struct rte_flow *flow0 = rte_flow_create(port_id, &attr0, pattern0,
> > actions, error);
> > /* create more rules reusing shared action */
> > struct rte_flow *flow1 = rte_flow_create(port_id, &attr1, pattern1,
> > actions, error);
> > /* skipped: for flows 2 till N */
> > struct rte_flow *flowN = rte_flow_create(port_id, &attrN, patternN,
> > actions, error);
> > /* update shared action */
> > struct rte_flow_action updated_action;
> > /*
> > * skipped: initialize updated_action according to desired action
> > * configuration change
> > */
> > rte_flow_shared_action_update(port_id, handle, &updated_action, error);
> > /*
> > * from now on all flows 1 till N will act according to configuration of
> > * updated_action
> > */
> > /* skipped: destroy all flows 1 till N */
> > rte_flow_shared_action_destroy(port_id, handle, error);
> >
> > Signed-off-by: Andrey Vesnovaty <andreyv at nvidia.com>
> > Acked-by: Ori Kam <orika at nvidia.com>
>
> LGTM
>
> > ---
> > doc/guides/prog_guide/rte_flow.rst | 19 +++
> > doc/guides/rel_notes/release_20_11.rst | 9 ++
> > lib/librte_ethdev/rte_ethdev_version.map | 4 +
> > lib/librte_ethdev/rte_flow.c | 84 +++++++++++
> > lib/librte_ethdev/rte_flow.h | 169 ++++++++++++++++++++++-
> > lib/librte_ethdev/rte_flow_driver.h | 23 +++
> > 6 files changed, 307 insertions(+), 1 deletion(-)
> >
> > diff --git a/doc/guides/prog_guide/rte_flow.rst
> b/doc/guides/prog_guide/rte_flow.rst
> > index 119b128739..8cff8a0440 100644
> > --- a/doc/guides/prog_guide/rte_flow.rst
> > +++ b/doc/guides/prog_guide/rte_flow.rst
> > @@ -2666,6 +2666,25 @@ timeout passed without any matching on the flow.
> > | ``context`` | user input flow context |
> > +--------------+---------------------------------+
> >
> > +Action: ``SHARED``
> > +^^^^^^^^^^^^^^^^^^
> > +
> > +Flow Utilize shared action by handle as returned from
>
> Utilize -> utilize
Will fix.
>
> > +``rte_flow_shared_action_create()``.
> > +
> > +The behaviour of the shared action defined by ``action`` argument of type
> > +``struct rte_flow_action`` passed to ``rte_flow_shared_action_create()``.
> > +
> > +.. _table_rte_flow_shared_action:
> > +
> > +.. table:: SHARED
> > +
> > + +---------------+
> > + | Field |
> > + +===============+
> > + | no properties |
> > + +---------------+
> > +
> > Negative types
> > ~~~~~~~~~~~~~~
> >
> > diff --git a/doc/guides/rel_notes/release_20_11.rst
> b/doc/guides/rel_notes/release_20_11.rst
> > index 0b2a3700c3..87c90909be 100644
> > --- a/doc/guides/rel_notes/release_20_11.rst
> > +++ b/doc/guides/rel_notes/release_20_11.rst
> > @@ -109,6 +109,15 @@ New Features
> > * Extern objects and functions can be plugged into the pipeline.
> > * Transaction-oriented table updates.
> >
> > +* **Add shared action support for rte flow.**
>
> I think it required "ethdev: " prefix.
> Add -> Added, rte -> RTE, plus API, i.e.:
> **ethdev: Added shared action support to RTE flow API."
>
"ethdev:" prefix used in 'API Changes '. I'll change it to:
* **Added ethdev API to support shared action for RTE flow.**
> > +
> > + Added shared action support to utilize single rte flow action in multiple
>
> rte -> RTE, but I'd consider to drop RTE in both description,
> here and below.
>
> > + rte flow rules. An update of shared action configuration alters the behavior
> > + of all rte flow rules using it.
> > +
> > + * Added new action: ``RTE_FLOW_ACTION_TYPE_SHARED`` to use shared
> action
> > + as rte flow action.
> > + * Added new rte flow APIs to create/update/destroy/query shared action.
>
> Missing one more empty line here.
Will fix.
>
> >
> > Removed Items
> > -------------
> > diff --git a/lib/librte_ethdev/rte_ethdev_version.map
> b/lib/librte_ethdev/rte_ethdev_version.map
> > index c95ef5157a..a8a4821dbb 100644
> > --- a/lib/librte_ethdev/rte_ethdev_version.map
> > +++ b/lib/librte_ethdev/rte_ethdev_version.map
> > @@ -229,6 +229,10 @@ EXPERIMENTAL {
> > # added in 20.11
> > rte_eth_link_speed_to_str;
> > rte_eth_link_to_str;
> > + rte_flow_shared_action_create;
> > + rte_flow_shared_action_destroy;
> > + rte_flow_shared_action_update;
> > + rte_flow_shared_action_query;
>
> Shouldn't it be alphabetically sorted?
Query before update?
>
> > };
> >
> > INTERNAL {
> > diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
> > index f8fdd68fe9..9afa8905df 100644
> > --- a/lib/librte_ethdev/rte_flow.c
> > +++ b/lib/librte_ethdev/rte_flow.c
> > @@ -174,6 +174,7 @@ static const struct rte_flow_desc_data
> rte_flow_desc_action[] = {
> > MK_FLOW_ACTION(SET_IPV4_DSCP, sizeof(struct
> rte_flow_action_set_dscp)),
> > MK_FLOW_ACTION(SET_IPV6_DSCP, sizeof(struct
> rte_flow_action_set_dscp)),
> > MK_FLOW_ACTION(AGE, sizeof(struct rte_flow_action_age)),
> > + MK_FLOW_ACTION(SHARED, 0),
>
> It looks correct, it deserves a comment which explains
> why size is 0 here.
Comment will be added.
>
> > };
> >
> > int
> > @@ -1251,3 +1252,86 @@ rte_flow_get_aged_flows(uint16_t port_id, void
> **contexts,
> > RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> > NULL, rte_strerror(ENOTSUP));
> > }
> > +
> > +struct rte_flow_shared_action *
> > +rte_flow_shared_action_create(uint16_t port_id,
> > + const struct rte_flow_shared_action_conf *conf,
> > + const struct rte_flow_action *action,
> > + struct rte_flow_error *error)
> > +{
> > + struct rte_eth_dev *dev = &rte_eth_devices[port_id];
>
> Sorry, but it unsafe to initialize it before port_id check.
> It is too error-prone for the future maintenance of the
> code. Since, port_id is checked indirection here via
> rte_flow_ops_get(), please, initialize the variable or
> even move it completely to be just before usage.
>
> I realize that nearby code does the same, but IMHO it is
> never later to turn into the right direction.
Will fix.
>
> > + struct rte_flow_shared_action *shared_action;
> > + const struct rte_flow_ops *ops = rte_flow_ops_get(port_id, error);
> > +
> > + if (unlikely(!ops))
> > + return NULL;
> > + if (likely(!!ops->shared_action_create)) {
> > + shared_action = ops->shared_action_create(dev, conf, action,
> > + error);
> > + if (shared_action == NULL)
> > + flow_err(port_id, -rte_errno, error);
> > + return shared_action;
> > + }
> > + rte_flow_error_set(error, ENOSYS,
> RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> > + NULL, rte_strerror(ENOSYS));
> > + return NULL;
> > +}
> > +
> > +int
> > +rte_flow_shared_action_destroy(uint16_t port_id,
> > + struct rte_flow_shared_action *action,
> > + struct rte_flow_error *error)
> > +{
> > + struct rte_eth_dev *dev = &rte_eth_devices[port_id];
>
> same here
Will fix.
>
> > + const struct rte_flow_ops *ops = rte_flow_ops_get(port_id, error);
> > +
> > + if (unlikely(!ops))
> > + return -rte_errno;
> > + if (likely(!!ops->shared_action_destroy))
> > + return flow_err(port_id,
> > + ops->shared_action_destroy(dev, action,
> error),
> > + error);
> > + return rte_flow_error_set(error, ENOSYS,
> > + RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> > + NULL, rte_strerror(ENOSYS));
> > +}
> > +
> > +int
> > +rte_flow_shared_action_update(uint16_t port_id,
> > + struct rte_flow_shared_action *action,
> > + const struct rte_flow_action *update,
> > + struct rte_flow_error *error)
> > +{
> > + struct rte_eth_dev *dev = &rte_eth_devices[port_id];
>
> same here
Will fix.
>
> > + const struct rte_flow_ops *ops = rte_flow_ops_get(port_id, error);
> > +
> > + if (unlikely(!ops))
> > + return -rte_errno;
> > + if (likely(!!ops->shared_action_update))
> > + return flow_err(port_id, ops->shared_action_update(dev,
> action,
> > + update, error),
> > + error);
>
> Sorry, but above is very hard to follow what is where. May be
> helper variable sfor op result should be used to make it
> readable.
Agree, refactoring needed.
>
> > + return rte_flow_error_set(error, ENOSYS,
> > + RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> > + NULL, rte_strerror(ENOSYS));
> > +}
> > +
> > +int
> > +rte_flow_shared_action_query(uint16_t port_id,
> > + const struct rte_flow_shared_action *action,
> > + void *data,
> > + struct rte_flow_error *error)
> > +{
> > + struct rte_eth_dev *dev = &rte_eth_devices[port_id];
>
> same here
Will fix.
>
> > + const struct rte_flow_ops *ops = rte_flow_ops_get(port_id, error);
> > +
> > + if (unlikely(!ops))
> > + return -rte_errno;
> > + if (likely(!!ops->shared_action_query))
> > + return flow_err(port_id, ops->shared_action_query(dev, action,
> > + data, error),
> > + error);
>
> Sorry, but above is very hard to follow what is where. May be
> helper variable sfor op result should be used to make it
> readable.
Agree, refactoring needed.
>
> > + return rte_flow_error_set(error, ENOSYS,
> > + RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> > + NULL, rte_strerror(ENOSYS));
> > +}
> > diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> > index da8bfa5489..9050adec23 100644
> > --- a/lib/librte_ethdev/rte_flow.h
> > +++ b/lib/librte_ethdev/rte_flow.h
> > @@ -1714,7 +1714,8 @@ enum rte_flow_action_type {
> > /**
> > * Enables counters for this flow rule.
> > *
> > - * These counters can be retrieved and reset through rte_flow_query(),
> > + * These counters can be retrieved and reset through rte_flow_query()
> or
> > + * rte_flow_shared_action_query() if the action provided via handle,
> > * see struct rte_flow_query_count.
> > *
> > * See struct rte_flow_action_count.
> > @@ -2132,6 +2133,14 @@ enum rte_flow_action_type {
> > * see enum RTE_ETH_EVENT_FLOW_AGED
> > */
> > RTE_FLOW_ACTION_TYPE_AGE,
> > +
> > + /**
> > + * Describe action shared across multiple flow rules.
> > + *
> > + * Allow multiple rules reference the same action by handle (see
> > + * struct rte_flow_shared_action).
> > + */
> > + RTE_FLOW_ACTION_TYPE_SHARED,
> > };
> >
> > /**
> > @@ -2693,6 +2702,20 @@ struct rte_flow_action_set_dscp {
> > uint8_t dscp;
> > };
> >
> > +
> > +/**
> > + * RTE_FLOW_ACTION_TYPE_SHARED
> > + *
> > + * Opaque type returned after successfully creating a shared action.
> > + *
> > + * This handle can be used to manage and query the related action:
> > + * - share it across multiple flow rules
> > + * - update action configuration
> > + * - query action data
> > + * - destroy action
> > + */
> > +struct rte_flow_shared_action;
> > +
> > /* Mbuf dynamic field offset for metadata. */
> > extern int32_t rte_flow_dynf_metadata_offs;
> >
> > @@ -3357,6 +3380,150 @@ int
> > rte_flow_get_aged_flows(uint16_t port_id, void **contexts,
> > uint32_t nb_contexts, struct rte_flow_error *error);
> >
> > +/**
> > + * Specify shared action configuration
> > + */
> > +struct rte_flow_shared_action_conf {
> > + /**
> > + * Flow direction for shared action configuration.
> > + *
> > + * Shred action should be valid at least for one flow direction,
> > + * otherwise it is invalid for both ingress and egress rules.
> > + */
> > + uint32_t ingress:1;
> > + /**< Action valid for rules applied to ingress traffic. */
> > + uint32_t egress:1;
> > + /**< Action valid for rules applied to egress traffic. */
> > +};
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Create shared action for reuse in multiple flow rules.
> > + * The created shared action has single state and configuration
> > + * across all flow rules using it.
> > + *
> > + * @param[in] port_id
> > + * The port identifier of the Ethernet device.
> > + * @param[in] conf
> > + * Shared action configuration.
> > + * @param[in] action
> > + * Action configuration for shared action creation.
> > + * @param[out] error
> > + * Perform verbose error reporting if not NULL. PMDs initialize this
> > + * structure in case of error only.
> > + * @return
> > + * A valid handle in case of success, NULL otherwise and rte_errno is set
> > + * to one of the error codes defined:
> > + * - (ENOSYS) if underlying device does not support this functionality.
> > + * - (EIO) if underlying device is removed.
> > + * - (EINVAL) if *action* invalid.
> > + * - (ENOTSUP) if *action* valid but unsupported.
>
> ENODEV ?
Can you elaborate?
>
> > + */
> > +__rte_experimental
> > +struct rte_flow_shared_action *
> > +rte_flow_shared_action_create(uint16_t port_id,
> > + const struct rte_flow_shared_action_conf *conf,
> > + const struct rte_flow_action *action,
> > + struct rte_flow_error *error);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Destroy the shared action by handle.
> > + *
> > + * @param[in] port_id
> > + * The port identifier of the Ethernet device.
> > + * @param[in] action
> > + * Handle for the shared action to be destroyed.
> > + * @param[out] error
> > + * Perform verbose error reporting if not NULL. PMDs initialize this
> > + * structure in case of error only.
> > + * @return
> > + * - (0) if success.
> > + * - (-ENOSYS) if underlying device does not support this functionality.
> > + * - (-EIO) if underlying device is removed.
> > + * - (-ENOENT) if action pointed by *action* handle was not found.
> > + * - (-ETOOMANYREFS) if action pointed by *action* handle still used by one
> or
> > + * more rules
> > + * rte_errno is also set.
>
> -ENODEV?
Same here.
>
> > + */
> > +__rte_experimental
> > +int
> > +rte_flow_shared_action_destroy(uint16_t port_id,
> > + struct rte_flow_shared_action *action,
> > + struct rte_flow_error *error);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Update in-place the shared action configuration pointed by *action*
> handle
> > + * with the configuration provided as *update* argument.
> > + * The update of the shared action configuration effects all flow rules reusing
> > + * the action via handle.
> > + *
> > + * @param[in] port_id
> > + * The port identifier of the Ethernet device.
> > + * @param[in] action
> > + * Handle for the shared action to be updated.
> > + * @param[in] update
> > + * Action specification used to modify the action pointed by handle.
> > + * *update* should be of same type with the action pointed by the *action*
> > + * handle argument, otherwise considered as invalid.
> > + * @param[out] error
> > + * Perform verbose error reporting if not NULL. PMDs initialize this
> > + * structure in case of error only.
> > + * @return
> > + * - (0) if success.
> > + * - (-ENOSYS) if underlying device does not support this functionality.
> > + * - (-EIO) if underlying device is removed.
> > + * - (-EINVAL) if *update* invalid.
> > + * - (-ENOTSUP) if *update* valid but unsupported.
> > + * - (-ENOENT) if action pointed by *ctx* was not found.
>
> -ENODEV ?
And once more.
>
> > + * rte_errno is also set.
> > + */
> > +__rte_experimental
> > +int
> > +rte_flow_shared_action_update(uint16_t port_id,
> > + struct rte_flow_shared_action *action,
> > + const struct rte_flow_action *update,
> > + struct rte_flow_error *error);
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice.
> > + *
> > + * Query the shared action by handle.
> > + *
> > + * Retrieve action-specific data such as counters.
> > + * Data is gathered by special action which may be present/referenced in
> > + * more than one flow rule definition.
> > + *
> > + * \see RTE_FLOW_ACTION_TYPE_COUNT
> > + *
> > + * @param port_id
> > + * Port identifier of Ethernet device.
> > + * @param[in] action
> > + * Handle for the shared action to query.
> > + * @param[in, out] data
> > + * Pointer to storage for the associated query data type.
> > + * @param[out] error
> > + * Perform verbose error reporting if not NULL. PMDs initialize this
> > + * structure in case of error only.
> > + *
> > + * @return
> > + * 0 on success, a negative errno value otherwise and rte_errno is set.
> > + */
> > +__rte_experimental
> > +int
> > +rte_flow_shared_action_query(uint16_t port_id,
> > + const struct rte_flow_shared_action *action,
> > + void *data,
> > + struct rte_flow_error *error);
> > +
> > #ifdef __cplusplus
> > }
> > #endif
> > diff --git a/lib/librte_ethdev/rte_flow_driver.h
> b/lib/librte_ethdev/rte_flow_driver.h
> > index 3ee871d3eb..adaace47ea 100644
> > --- a/lib/librte_ethdev/rte_flow_driver.h
> > +++ b/lib/librte_ethdev/rte_flow_driver.h
> > @@ -108,6 +108,29 @@ struct rte_flow_ops {
> > void **context,
> > uint32_t nb_contexts,
> > struct rte_flow_error *err);
> > + /** See rte_flow_shared_action_create() */
> > + struct rte_flow_shared_action *(*shared_action_create)
> > + (struct rte_eth_dev *dev,
> > + const struct rte_flow_shared_action_conf *conf,
> > + const struct rte_flow_action *action,
> > + struct rte_flow_error *error);
> > + /** See rte_flow_shared_action_destroy() */
> > + int (*shared_action_destroy)
> > + (struct rte_eth_dev *dev,
> > + struct rte_flow_shared_action *shared_action,
> > + struct rte_flow_error *error);
> > + /** See rte_flow_shared_action_update() */
> > + int (*shared_action_update)
> > + (struct rte_eth_dev *dev,
> > + struct rte_flow_shared_action *shared_action,
> > + const struct rte_flow_action *update,
> > + struct rte_flow_error *error);
> > + /** See rte_flow_shared_action_query() */
> > + int (*shared_action_query)
> > + (struct rte_eth_dev *dev,
> > + const struct rte_flow_shared_action *shared_action,
> > + void *data,
> > + struct rte_flow_error *error);
> > };
> >
> > /**
> >
More information about the dev
mailing list