[dpdk-dev] [PATCH v6 3/5] ethdev: add API to get hairpin peer ports list

Bing Zhao bingz at nvidia.com
Thu Oct 15 15:08:53 CEST 2020


After hairpin queues are configured, in general, the application will
maintain the ports topology and even the queues configuration for
the hairpin. But sometimes it will not.

If there is no hot-plug, it is easy to bind and unbind hairpin among
all the ports. The application can just connect or disconnect the
hairpin egress ports to/from all the probed ingress ports. Then all
the connections could be handled properly.

But with hot-plug / hot-unplug, one port could be probed and removed
dynamically. With two ports hairpin, all the connections from and to
this port should be handled after start(bind) or before stop(unbind).
It is necessary to know the hairpin topology with this port.

This function will return the ports list with the actual peer ports
number after configuration. Either peer Rx or Tx ports will be
gotten with this function call.

Signed-off-by: Bing Zhao <bingz at nvidia.com>
Acked-by: Ori Kam <orika at nvidia.com>
---
v6:
  * Coding style updates
  * Using "Rx" & "Tx"
v5:
  * change EINVAL to ENODEV
  * add newline character
v4: add release notes update
v3:
  * change the direction from bool to unsigned int type
  * add length to protect the array from getting corrupted
---
 doc/guides/rel_notes/release_20_11.rst   |  1 +
 lib/librte_ethdev/rte_ethdev.c           | 24 +++++++++++++++++++++++
 lib/librte_ethdev/rte_ethdev.h           | 30 +++++++++++++++++++++++++++++
 lib/librte_ethdev/rte_ethdev_driver.h    | 33 ++++++++++++++++++++++++++++++++
 lib/librte_ethdev/rte_ethdev_version.map |  1 +
 5 files changed, 89 insertions(+)

diff --git a/doc/guides/rel_notes/release_20_11.rst b/doc/guides/rel_notes/release_20_11.rst
index 2f23e6f..7b8e3ee 100644
--- a/doc/guides/rel_notes/release_20_11.rst
+++ b/doc/guides/rel_notes/release_20_11.rst
@@ -93,6 +93,7 @@ New Features
 
   New APIs are introduced to support binding / unbinding 2 ports hairpin.
   Hairpin Tx part flow rules can be inserted explicitly.
+  New API is added to get the hairpin peer ports list.
 
 * **Updated Broadcom bnxt driver.**
 
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index bcbee30..80907b2 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -2257,6 +2257,30 @@ struct rte_eth_dev *
 	return ret;
 }
 
+int
+rte_eth_hairpin_get_peer_ports(uint16_t port_id, uint16_t *peer_ports,
+			       size_t len, uint32_t direction)
+{
+	struct rte_eth_dev *dev;
+	int ret;
+
+	if (peer_ports == NULL || len == 0)
+		return -EINVAL;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->hairpin_get_peer_ports,
+				-ENOTSUP);
+
+	ret = (*dev->dev_ops->hairpin_get_peer_ports)(dev, peer_ports,
+						      len, direction);
+	if (ret < 0)
+		RTE_ETHDEV_LOG(ERR, "Failed to get %d hairpin peer %s ports\n",
+			       port_id, direction ? "Rx" : "Tx");
+
+	return ret;
+}
+
 void
 rte_eth_tx_buffer_drop_callback(struct rte_mbuf **pkts, uint16_t unsent,
 		void *userdata __rte_unused)
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index a8e5cdc..f02acdc 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -2186,6 +2186,36 @@ int rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,
  * @warning
  * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
  *
+ * Get all the hairpin peer Rx / Tx ports of the current port.
+ * The caller should ensure that the array is large enough to save the ports
+ * list.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param peer_ports
+ *   Pointer to the array to store the peer ports list.
+ * @param len
+ *   Length of the array to store the port identifiers.
+ * @param direction
+ *   Current port to peer port direction
+ *   positive - current used as Tx to get all peer Rx ports.
+ *   zero - current used as Rx to get all peer Tx ports.
+ *
+ * @return
+ *   - (0 or positive) actual peer ports number.
+ *   - (-EINVAL) if bad parameter.
+ *   - (-ENODEV) if *port_id* invalid
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - Others detailed errors from PMD drivers.
+ */
+__rte_experimental
+int rte_eth_hairpin_get_peer_ports(uint16_t port_id, uint16_t *peer_ports,
+				   size_t len, uint32_t direction);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
  * Bind all hairpin Tx queues of one port to the Rx queues of the peer port.
  * It is only allowed to call this function after all hairpin queues are
  * configured properly and the devices are in started state.
diff --git a/lib/librte_ethdev/rte_ethdev_driver.h b/lib/librte_ethdev/rte_ethdev_driver.h
index 9a65bd5..03e00d5 100644
--- a/lib/librte_ethdev/rte_ethdev_driver.h
+++ b/lib/librte_ethdev/rte_ethdev_driver.h
@@ -657,6 +657,37 @@ typedef int (*eth_fec_get_t)(struct rte_eth_dev *dev,
 
 /**
  * @internal
+ * Get all hairpin Tx/Rx peer ports of the current device, if any.
+ *
+ * @param dev
+ *   ethdev handle of port.
+ * @param peer_ports
+ *   array to save the ports list.
+ * @param len
+ *   array length.
+ * @param direction
+ *   value to decide the current to peer direction
+ *   positive - used as Tx to get all peer Rx ports.
+ *   zero - used as Rx to get all peer Tx ports.
+ *
+ * @return
+ *   Negative errno value on error, 0 or positive on success.
+ *
+ * @retval 0
+ *   Success, no peer ports.
+ * @retval >0
+ *   Actual number of the peer ports.
+ * @retval -ENOTSUP
+ *   Get peer ports API is not supported.
+ * @retval -EINVAL
+ *   One of the parameters is invalid.
+ */
+typedef int (*hairpin_get_peer_ports_t)(struct rte_eth_dev *dev,
+					uint16_t *peer_ports, size_t len,
+					uint32_t direction);
+
+/**
+ * @internal
  * Bind all hairpin Tx queues of one port to the Rx queues of the peer port.
  *
  * @param dev
@@ -849,6 +880,8 @@ struct eth_dev_ops {
 	/**< Get Forward Error Correction(FEC) mode. */
 	eth_fec_set_t fec_set;
 	/**< Set Forward Error Correction(FEC) mode. */
+	hairpin_get_peer_ports_t hairpin_get_peer_ports;
+	/**< Get hairpin peer ports list. */
 	eth_hairpin_bind_t hairpin_bind;
 	/**< Bind all hairpin Tx queues of device to the peer port Rx queues. */
 	eth_hairpin_unbind_t hairpin_unbind;
diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
index d67c9dc..a1e6897 100644
--- a/lib/librte_ethdev/rte_ethdev_version.map
+++ b/lib/librte_ethdev/rte_ethdev_version.map
@@ -228,6 +228,7 @@ EXPERIMENTAL {
 
 	# added in 20.11
 	rte_eth_hairpin_bind;
+	rte_eth_hairpin_get_peer_ports;
 	rte_eth_hairpin_unbind;
 	rte_eth_link_speed_to_str;
 	rte_eth_link_to_str;
-- 
1.8.3.1



More information about the dev mailing list