[dpdk-dev] [PATCH v12 5/6] app/testpmd: add rxoffs commands and parameters

Viacheslav Ovsiienko viacheslavo at nvidia.com
Fri Oct 16 18:44:39 CEST 2020


Add command line parameter:

--rxoffs=X[,Y]

Sets the offsets of packet segments from the beginning of the
receiving buffer if split feature is engaged. Affects only the
queues configured with split offloads (currently BUFFER_SPLIT
is supported only).

Add interactive mode command, providing the same:

testpmd> set rxoffs (x[,y]*)

Where x[,y]* represents a CSV list of values, without white space.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo at nvidia.com>
---
 app/test-pmd/cmdline.c                      | 61 +++++++++++++++++++++++++++--
 app/test-pmd/config.c                       | 44 +++++++++++++++++++++
 app/test-pmd/parameters.c                   | 15 +++++++
 app/test-pmd/testpmd.c                      |  2 +
 app/test-pmd/testpmd.h                      |  4 ++
 doc/guides/testpmd_app_ug/run_app.rst       |  6 +++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 17 +++++++-
 7 files changed, 145 insertions(+), 4 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index a195e37..e09df36 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -183,7 +183,7 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"show (rxq|txq) info (port_id) (queue_id)\n"
 			"    Display information for configured RX/TX queue.\n\n"
 
-			"show config (rxtx|cores|fwd|rxpkts|txpkts)\n"
+			"show config (rxtx|cores|fwd|rxoffs|rxpkts|txpkts)\n"
 			"    Display the given configuration.\n\n"
 
 			"read rxd (port_id) (queue_id) (rxd_id)\n"
@@ -294,6 +294,12 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"    Set the transmit delay time and number of retries,"
 			" effective when retry is enabled.\n\n"
 
+			"set rxoffs (x[,y]*)\n"
+			"    Set the offset of each packet segment on"
+			" receiving if split feature is engaged."
+			" Affects only the queues configured with split"
+			" offloads.\n\n"
+
 			"set rxpkts (x[,y]*)\n"
 			"    Set the length of each segment to scatter"
 			" packets on receiving if split feature is engaged."
@@ -3913,6 +3919,52 @@ struct cmd_set_log_result {
 	},
 };
 
+/* *** SET SEGMENT OFFSETS OF RX PACKETS SPLIT *** */
+
+struct cmd_set_rxoffs_result {
+	cmdline_fixed_string_t cmd_keyword;
+	cmdline_fixed_string_t rxoffs;
+	cmdline_fixed_string_t seg_offsets;
+};
+
+static void
+cmd_set_rxoffs_parsed(void *parsed_result,
+		      __rte_unused struct cmdline *cl,
+		      __rte_unused void *data)
+{
+	struct cmd_set_rxoffs_result *res;
+	unsigned int seg_offsets[MAX_SEGS_BUFFER_SPLIT];
+	unsigned int nb_segs;
+
+	res = parsed_result;
+	nb_segs = parse_item_list(res->seg_offsets, "segment offsets",
+				  MAX_SEGS_BUFFER_SPLIT, seg_offsets, 0);
+	if (nb_segs > 0)
+		set_rx_pkt_offsets(seg_offsets, nb_segs);
+}
+
+cmdline_parse_token_string_t cmd_set_rxoffs_keyword =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_rxoffs_result,
+				 cmd_keyword, "set");
+cmdline_parse_token_string_t cmd_set_rxoffs_name =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_rxoffs_result,
+				 rxoffs, "rxoffs");
+cmdline_parse_token_string_t cmd_set_rxoffs_offsets =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_rxoffs_result,
+				 seg_offsets, NULL);
+
+cmdline_parse_inst_t cmd_set_rxoffs = {
+	.f = cmd_set_rxoffs_parsed,
+	.data = NULL,
+	.help_str = "set rxoffs <len0[,len1]*>",
+	.tokens = {
+		(void *)&cmd_set_rxoffs_keyword,
+		(void *)&cmd_set_rxoffs_name,
+		(void *)&cmd_set_rxoffs_offsets,
+		NULL,
+	},
+};
+
 /* *** SET SEGMENT LENGTHS OF RX PACKETS SPLIT *** */
 
 struct cmd_set_rxpkts_result {
@@ -7587,6 +7639,8 @@ static void cmd_showcfg_parsed(void *parsed_result,
 		fwd_lcores_config_display();
 	else if (!strcmp(res->what, "fwd"))
 		pkt_fwd_config_display(&cur_fwd_config);
+	else if (!strcmp(res->what, "rxoffs"))
+		show_rx_pkt_offsets();
 	else if (!strcmp(res->what, "rxpkts"))
 		show_rx_pkt_segments();
 	else if (!strcmp(res->what, "txpkts"))
@@ -7601,12 +7655,12 @@ static void cmd_showcfg_parsed(void *parsed_result,
 	TOKEN_STRING_INITIALIZER(struct cmd_showcfg_result, cfg, "config");
 cmdline_parse_token_string_t cmd_showcfg_what =
 	TOKEN_STRING_INITIALIZER(struct cmd_showcfg_result, what,
-				 "rxtx#cores#fwd#rxpkts#txpkts#txtimes");
+				 "rxtx#cores#fwd#rxoffs#rxpkts#txpkts#txtimes");
 
 cmdline_parse_inst_t cmd_showcfg = {
 	.f = cmd_showcfg_parsed,
 	.data = NULL,
-	.help_str = "show config rxtx|cores|fwd|rxpkts|txpkts|txtimes",
+	.help_str = "show config rxtx|cores|fwd|rxoffs|rxpkts|txpkts|txtimes",
 	.tokens = {
 		(void *)&cmd_showcfg_show,
 		(void *)&cmd_showcfg_port,
@@ -19879,6 +19933,7 @@ struct cmd_showport_macs_result {
 	(cmdline_parse_inst_t *)&cmd_reset,
 	(cmdline_parse_inst_t *)&cmd_set_numbers,
 	(cmdline_parse_inst_t *)&cmd_set_log,
+	(cmdline_parse_inst_t *)&cmd_set_rxoffs,
 	(cmdline_parse_inst_t *)&cmd_set_rxpkts,
 	(cmdline_parse_inst_t *)&cmd_set_txpkts,
 	(cmdline_parse_inst_t *)&cmd_set_txsplit,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 4ac2052..5d3f108 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -3528,6 +3528,50 @@ struct igb_ring_desc_16_bytes {
 }
 
 void
+show_rx_pkt_offsets(void)
+{
+	uint32_t i, n;
+
+	n = rx_pkt_nb_offs;
+	printf("Number of offsets: %u\n", n);
+	if (n) {
+		printf("Segment offsets: ");
+		for (i = 0; i != n - 1; i++)
+			printf("%hu,", rx_pkt_seg_offsets[i]);
+		printf("%hu\n", rx_pkt_seg_lengths[i]);
+	}
+}
+
+void
+set_rx_pkt_offsets(unsigned int *seg_offsets, unsigned int nb_offs)
+{
+	unsigned int i;
+
+	if (nb_offs >= MAX_SEGS_BUFFER_SPLIT) {
+		printf("nb segments per RX packets=%u >= "
+		       "MAX_SEGS_BUFFER_SPLIT - ignored\n", nb_offs);
+		return;
+	}
+
+	/*
+	 * No extra check here, the segment length will be checked by PMD
+	 * in the extended queue setup.
+	 */
+	for (i = 0; i < nb_offs; i++) {
+		if (seg_offsets[i] >= UINT16_MAX) {
+			printf("offset[%u]=%u > UINT16_MAX - give up\n",
+			       i, seg_offsets[i]);
+			return;
+		}
+	}
+
+	for (i = 0; i < nb_offs; i++)
+		rx_pkt_seg_offsets[i] = (uint16_t) seg_offsets[i];
+
+	rx_pkt_nb_offs = (uint8_t) nb_offs;
+}
+
+void
 show_rx_pkt_segments(void)
 {
 	uint32_t i, n;
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index e4e3635..2298ba5 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -184,6 +184,7 @@
 	       "(0 <= mapping <= %d).\n", RTE_ETHDEV_QUEUE_STAT_CNTRS - 1);
 	printf("  --no-flush-rx: Don't flush RX streams before forwarding."
 	       " Used mainly with PCAP drivers.\n");
+	printf("  --rxoffs=X[,Y]*: set RX segment offsets for split.\n");
 	printf("  --rxpkts=X[,Y]*: set RX segment sizes to split.\n");
 	printf("  --txpkts=X[,Y]*: set TX segment sizes"
 		" or total packet length.\n");
@@ -663,6 +664,7 @@
 		{ "rx-queue-stats-mapping",	1, 0, 0 },
 		{ "no-flush-rx",	0, 0, 0 },
 		{ "flow-isolate-all",	        0, 0, 0 },
+		{ "rxoffs",			1, 0, 0 },
 		{ "rxpkts",			1, 0, 0 },
 		{ "txpkts",			1, 0, 0 },
 		{ "txonly-multi-flow",		0, 0, 0 },
@@ -1274,6 +1276,19 @@
 						 "invalid RX queue statistics mapping config entered\n");
 				}
 			}
+			if (!strcmp(lgopts[opt_idx].name, "rxoffs")) {
+				unsigned int seg_off[MAX_SEGS_BUFFER_SPLIT];
+				unsigned int nb_offs;
+
+				nb_offs = parse_item_list
+						(optarg, "rxpkt offsets",
+						 MAX_SEGS_BUFFER_SPLIT,
+						 seg_off, 0);
+				if (nb_offs > 0)
+					set_rx_pkt_offsets(seg_off, nb_offs);
+				else
+					rte_exit(EXIT_FAILURE, "bad rxoffs\n");
+			}
 			if (!strcmp(lgopts[opt_idx].name, "rxpkts")) {
 				unsigned int seg_len[MAX_SEGS_BUFFER_SPLIT];
 				unsigned int nb_segs;
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index acd269e..99b6fd1 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -215,6 +215,8 @@ struct fwd_engine * fwd_engines[] = {
  */
 uint16_t rx_pkt_seg_lengths[MAX_SEGS_BUFFER_SPLIT];
 uint8_t  rx_pkt_nb_segs; /**< Number of segments to split */
+uint16_t rx_pkt_seg_offsets[MAX_SEGS_BUFFER_SPLIT];
+uint8_t  rx_pkt_nb_offs; /**< Number of specified offsets */
 
 /*
  * Configuration of packet segments used by the "txonly" processing engine.
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 6e82321..253d3c0 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -438,6 +438,8 @@ struct queue_stats_mappings {
  */
 extern uint16_t rx_pkt_seg_lengths[MAX_SEGS_BUFFER_SPLIT];
 extern uint8_t  rx_pkt_nb_segs; /**< Number of segments to split */
+extern uint16_t rx_pkt_seg_offsets[MAX_SEGS_BUFFER_SPLIT];
+extern uint8_t  rx_pkt_nb_offs; /**< Number of specified offsets */
 
 /*
  * Configuration of packet segments used by the "txonly" processing engine.
@@ -849,6 +851,8 @@ void vlan_tpid_set(portid_t port_id, enum rte_vlan_type vlan_type,
 void set_verbose_level(uint16_t vb_level);
 void set_rx_pkt_segments(unsigned int *seg_lengths, unsigned int nb_segs);
 void show_rx_pkt_segments(void);
+void set_rx_pkt_offsets(unsigned int *seg_offsets, unsigned int nb_offs);
+void show_rx_pkt_offsets(void);
 void set_tx_pkt_segments(unsigned int *seg_lengths, unsigned int nb_segs);
 void show_tx_pkt_segments(void);
 void set_tx_pkt_times(unsigned int *tx_times);
diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index 463b76c..9b0a84a 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -361,6 +361,12 @@ The command line options are:
 
     Don't flush the RX streams before starting forwarding. Used mainly with the PCAP PMD.
 
+*   ``--rxoffs=X[,Y]``
+
+    Set the offsets of packet segments on receiving if split
+    feature is engaged. Affects only the queues configured
+    with split offloads (currently BUFFER_SPLIT is supported only).
+
 *   ``--rxpkts=X[,Y]``
 
     Set the length of segments to scatter packets on receiving if split
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index b9fad3a..e73530e 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -273,7 +273,7 @@ show config
 Displays the configuration of the application.
 The configuration comes from the command-line, the runtime or the application defaults::
 
-   testpmd> show config (rxtx|cores|fwd|rxpkts|txpkts|txtimes)
+   testpmd> show config (rxtx|cores|fwd|rxoffs|rxpkts|txpkts|txtimes)
 
 The available information categories are:
 
@@ -283,6 +283,8 @@ The available information categories are:
 
 * ``fwd``: Packet forwarding configuration.
 
+* ``rxoffs``: Packet offsets for RX split.
+
 * ``rxpkts``: Packets to RX split configuration.
 
 * ``txpkts``: Packets to TX configuration.
@@ -776,6 +778,19 @@ When retry is enabled, the transmit delay time and number of retries can also be
 
    testpmd> set burst tx delay (microseconds) retry (num)
 
+set rxoffs
+~~~~~~~~~~
+
+Set the offsets of segments relating to the data buffer beginning on receiving
+if split feature is engaged. Affects only the queues configured with split
+offloads (currently BUFFER_SPLIT is supported only).
+
+   testpmd> set rxoffs (x[,y]*)
+
+Where x[,y]* represents a CSV list of values, without white space. If the list
+of offsets is shorter than the list of segments the zero offsets will be used
+for the remaining segments.
+
 set rxpkts
 ~~~~~~~~~~
 
-- 
1.8.3.1



More information about the dev mailing list