[dpdk-dev] [PATCH v4 00/58] net: txgbe PMD

[Ferruh Yigit]

On 10/19/2020 9:53 AM, Jiawen Wu wrote:
> v4: Add log type introduction,
>      add txgbe support in release note.
> v3: Merge some recent changes in the main repo,
>      fix the checkpatch warnings.
> v2: Re-order patches and fix some known problems.
> v1: Introduce txgbe PMD.
> 
> 
> Jiawen Wu (58):
>    net/txgbe: add build and doc infrastructure
>    net/txgbe: add ethdev probe and remove
>    net/txgbe: add device init and uninit
>    net/txgbe: add error types and registers
>    net/txgbe: add MAC type and bus lan id
>    net/txgbe: add HW infrastructure and dummy function
>    net/txgbe: add EEPROM functions
>    net/txgbe: add HW init and reset operation
>    net/txgbe: add PHY init
>    net/txgbe: add module identify
>    net/txgbe: add PHY reset
>    net/txgbe: add info get operation
>    net/txgbe: add interrupt operation
>    net/txgbe: add device configure operation
>    net/txgbe: add link status change
>    net/txgbe: add multi-speed link setup
>    net/txgbe: add autoc read and write
>    net/txgbe: add MAC address operations
>    net/txgbe: add unicast hash bitmap
>    net/txgbe: add Rx and Tx init
>    net/txgbe: add Rx and Tx queues setup and release
>    net/txgbe: add Rx and Tx start and stop
>    net/txgbe: add packet type
>    net/txgbe: fill simple transmit function
>    net/txgbe: fill transmit function with hardware offload
>    net/txgbe: fill Tx prepare function
>    net/txgbe: fill receive functions
>    net/txgbe: add device start operation
>    net/txgbe: add Rx and Tx data path start and stop
>    net/txgbe: add device stop and close operations
>    net/txgbe: support Rx interrupt
>    net/txgbe: add Rx and Tx queue info get
>    net/txgbe: add device stats get
>    net/txgbe: add device xstats get
>    net/txgbe: add queue stats mapping
>    net/txgbe: add VLAN handle support
>    net/txgbe: add SWFW semaphore and lock
>    net/txgbe: add PF module init and uninit for SRIOV
>    net/txgbe: add process mailbox operation
>    net/txgbe: add PF module configure for SRIOV
>    net/txgbe: add VMDq configure
>    net/txgbe: add RSS support
>    net/txgbe: add DCB support
>    net/txgbe: add flow control support
>    net/txgbe: add FC auto negotiation support
>    net/txgbe: add priority flow control support
>    net/txgbe: add device promiscuous and allmulticast mode
>    net/txgbe: add MTU set operation
>    net/txgbe: add FW version get operation
>    net/txgbe: add EEPROM info get operation
>    net/txgbe: add register dump support
>    net/txgbe: support device LED on and off
>    net/txgbe: add mirror rule operations
>    net/txgbe: add PTP support
>    net/txgbe: add DCB info get operation
>    net/txgbe: add Rx and Tx descriptor status
>    net/txgbe: change stop operation callback to return int
>    net/txgbe: introduce log type in the driver documentation

For series,
Reviewed-by: Ferruh Yigit <ferruh.yigit at intel.com>

Series applied to dpdk-next-net/main, thanks.



57/58 & 58/58 has been distributed to the relevant commits while merging, please 
double check them in the upstream repo.

56/58 & 53/58 has been dropped while merging.
  56/58 needs a new version which can be send individually,
  53/58 is adding a deprecated feature, it can't go in as it is.

Also can you please send a patch for the comment mentioned in 38/58?