[dpdk-dev] [v5 1/2] cryptodev: support enqueue & dequeue callback functions
Ananyev, Konstantin
konstantin.ananyev at intel.com
Wed Oct 28 14:26:08 CET 2020
> This patch adds APIs to add/remove callback functions on crypto
> enqueue/dequeue burst. The callback function will be called for
> each burst of crypto ops received on a given crypto device queue pair.
>
> Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar at intel.com>
> Acked-by: Konstantin Ananyev <konstantin.ananyev at intel.com>
> ---
> config/rte_config.h | 1 +
> doc/guides/prog_guide/cryptodev_lib.rst | 47 +++
> doc/guides/rel_notes/release_20_11.rst | 6 +
> lib/librte_cryptodev/meson.build | 2 +-
> lib/librte_cryptodev/rte_cryptodev.c | 419 ++++++++++++++++++++++++-
> lib/librte_cryptodev/rte_cryptodev.h | 260 ++++++++++++++-
> lib/librte_cryptodev/rte_cryptodev_version.map | 4 +
> 7 files changed, 736 insertions(+), 3 deletions(-)
>
> diff --git a/config/rte_config.h b/config/rte_config.h
> index 03d90d7..e999d93 100644
> --- a/config/rte_config.h
> +++ b/config/rte_config.h
> @@ -61,6 +61,7 @@
> /* cryptodev defines */
> #define RTE_CRYPTO_MAX_DEVS 64
> #define RTE_CRYPTODEV_NAME_LEN 64
> +#define RTE_CRYPTO_CALLBACKS 1
>
> /* compressdev defines */
> #define RTE_COMPRESS_MAX_DEVS 64
> diff --git a/doc/guides/prog_guide/cryptodev_lib.rst b/doc/guides/prog_guide/cryptodev_lib.rst
> index 72129e4..9d0ff59 100644
> --- a/doc/guides/prog_guide/cryptodev_lib.rst
> +++ b/doc/guides/prog_guide/cryptodev_lib.rst
> @@ -338,6 +338,53 @@ start of private data information. The offset is counted from the start of the
> rte_crypto_op including other crypto information such as the IVs (since there can
> be an IV also for authentication).
>
> +User callback APIs
> +~~~~~~~~~~~~~~~~~~
> +The add APIs configures a user callback function to be called for each burst of crypto
> +ops received/sent on a given crypto device queue pair. The return value is a pointer
> +that can be used later to remove the callback API. Application is expected to register
> +a callback function of type ``rte_cryptodev_callback_fn``. Multiple callback functions
> +can be added for a given queue pair. API does not restrict on maximum number of
> +callbacks.
> +
> +Callbacks registered by application would not survive rte_cryptodev_configure() as it
> +reinitializes the callback list. It is user responsibility to remove all installed
> +callbacks before calling rte_cryptodev_configure() to avoid possible memory leakage.
> +
> +So, application is expected to add user callback after rte_cryptodev_configure().
> +The callbacks can also be added at the runtime. These callbacks get executed when
> +``rte_cryptodev_enqueue_burst``/``rte_cryptodev_dequeue_burst`` is called.
> +
> +.. code-block:: c
> +
> + struct rte_cryptodev_cb *
> + rte_cryptodev_add_enq_callback(uint8_t dev_id,
> + uint16_t qp_id,
> + rte_cryptodev_callback_fn cb_fn,
> + void *cb_arg);
> +
> + struct rte_cryptodev_cb *
> + rte_cryptodev_add_deq_callback(uint8_t dev_id,
> + uint16_t qp_id,
> + rte_cryptodev_callback_fn cb_fn,
> + void *cb_arg);
> +
> + uint16_t (*rte_cryptodev_callback_fn)(uint16_t dev_id, uint16_t qp_id,
> + struct rte_crypto_op **ops, uint16_t nb_ops, void *user_param);
> +
> +The remove API removes a callback function added by
> +``rte_cryptodev_add_enq_callback``/``rte_cryptodev_add_deq_callback''.
> +
> +.. code-block:: c
> +
> + int rte_cryptodev_remove_enq_callback(uint8_t dev_id,
> + uint16_t qp_id,
> + struct rte_cryptodev_cb *cb);
> +
> + int rte_cryptodev_remove_deq_callback(uint8_t dev_id,
> + uint16_t qp_id,
> + struct rte_cryptodev_cb *cb);
> +
>
> Enqueue / Dequeue Burst APIs
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> diff --git a/doc/guides/rel_notes/release_20_11.rst b/doc/guides/rel_notes/release_20_11.rst
> index 48717ee..d12fb31 100644
> --- a/doc/guides/rel_notes/release_20_11.rst
> +++ b/doc/guides/rel_notes/release_20_11.rst
> @@ -174,6 +174,12 @@ New Features
> enqueue/dequeue operations but does not necessarily depends on
> mbufs and cryptodev operation mempools.
>
> +* **Added enqueue & dequeue callback APIs for cryptodev library.**
> +
> + Cryptodev libray is added with enqueue & dequeue callback APIs to
> + enable applications to add/remove user callbacks which gets called
> + for every enqueue/dequeue operation.
> +
> * **Updated the aesni_mb crypto PMD.**
>
> * Added support for AES-ECB 128, 192 and 256.
> diff --git a/lib/librte_cryptodev/meson.build b/lib/librte_cryptodev/meson.build
> index c4c6b3b..8c5493f 100644
> --- a/lib/librte_cryptodev/meson.build
> +++ b/lib/librte_cryptodev/meson.build
> @@ -9,4 +9,4 @@ headers = files('rte_cryptodev.h',
> 'rte_crypto.h',
> 'rte_crypto_sym.h',
> 'rte_crypto_asym.h')
> -deps += ['kvargs', 'mbuf']
> +deps += ['kvargs', 'mbuf', 'rcu']
> diff --git a/lib/librte_cryptodev/rte_cryptodev.c b/lib/librte_cryptodev/rte_cryptodev.c
> index 3d95ac6..677c2ef 100644
> --- a/lib/librte_cryptodev/rte_cryptodev.c
> +++ b/lib/librte_cryptodev/rte_cryptodev.c
> @@ -448,6 +448,127 @@ struct rte_cryptodev_sym_session_pool_private_data {
> return 0;
> }
>
> +#ifdef RTE_CRYPTO_CALLBACKS
> +/* spinlock for crypto device enq callbacks */
> +static rte_spinlock_t rte_cryptodev_callback_lock = RTE_SPINLOCK_INITIALIZER;
> +
> +static void
> +cryptodev_cb_cleanup(struct rte_cryptodev *dev)
> +{
> + struct rte_cryptodev_cb_rcu *list;
> + struct rte_cryptodev_cb *cb, *next;
> + uint16_t qp_id;
> +
> + if (dev->enq_cbs == NULL && dev->deq_cbs == NULL)
> + return;
> +
> + for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
> + list = &dev->enq_cbs[qp_id];
> + cb = list->next;
> + while (cb != NULL) {
> + next = cb->next;
> + rte_free(cb);
> + cb = next;
> + }
> +
> + rte_free(list->qsbr);
> + }
> +
> + for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
> + list = &dev->deq_cbs[qp_id];
> + cb = list->next;
> + while (cb != NULL) {
> + next = cb->next;
> + rte_free(cb);
> + cb = next;
> + }
> +
> + rte_free(list->qsbr);
> + }
> +
> + rte_free(dev->enq_cbs);
> + dev->enq_cbs = NULL;
> + rte_free(dev->deq_cbs);
> + dev->deq_cbs = NULL;
> +}
> +
> +static int
> +cryptodev_cb_init(struct rte_cryptodev *dev)
> +{
> + struct rte_cryptodev_cb_rcu *list;
> + struct rte_rcu_qsbr *qsbr;
> + uint16_t qp_id;
> + size_t size;
> +
> + /* Max thread set to 1, as one DP thread accessing a queue-pair */
> + const uint32_t max_threads = 1;
> +
> + dev->enq_cbs = rte_zmalloc(NULL,
> + sizeof(struct rte_cryptodev_cb_rcu) *
> + dev->data->nb_queue_pairs, 0);
> + if (dev->enq_cbs == NULL) {
> + CDEV_LOG_ERR("Failed to allocate memory for enq callbacks");
> + rte_errno = ENOMEM;
As a nit - if this function returns an error code as return value,
no point to update rte_errno too.
> + return -ENOMEM;
> + }
> +
> + dev->deq_cbs = rte_zmalloc(NULL,
> + sizeof(struct rte_cryptodev_cb_rcu) *
> + dev->data->nb_queue_pairs, 0);
> + if (dev->deq_cbs == NULL) {
> + CDEV_LOG_ERR("Failed to allocate memory for deq callbacks");
> + rte_free(dev->enq_cbs);
> + rte_errno = ENOMEM;
> + return -ENOMEM;
> + }
> +
> + /* Create RCU QSBR variable */
> + size = rte_rcu_qsbr_get_memsize(max_threads);
> +
> + for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
> + list = &dev->enq_cbs[qp_id];
> + qsbr = rte_zmalloc(NULL, size, RTE_CACHE_LINE_SIZE);
> + if (qsbr == NULL) {
> + CDEV_LOG_ERR("Failed to allocate memory for RCU on "
> + "queue_pair_id=%d", qp_id);
> + goto cb_init_err;
> + }
> +
> + if (rte_rcu_qsbr_init(qsbr, max_threads)) {
> + CDEV_LOG_ERR("Failed to initialize for RCU on "
> + "queue_pair_id=%d", qp_id);
> + goto cb_init_err;
> + }
> +
> + list->qsbr = qsbr;
> + }
> +
> + for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
> + list = &dev->deq_cbs[qp_id];
> + qsbr = rte_zmalloc(NULL, size, RTE_CACHE_LINE_SIZE);
> + if (qsbr == NULL) {
> + CDEV_LOG_ERR("Failed to allocate memory for RCU on "
> + "queue_pair_id=%d", qp_id);
> + goto cb_init_err;
> + }
> +
> + if (rte_rcu_qsbr_init(qsbr, max_threads)) {
> + CDEV_LOG_ERR("Failed to initialize for RCU on "
> + "queue_pair_id=%d", qp_id);
> + goto cb_init_err;
> + }
> +
> + list->qsbr = qsbr;
> + }
> +
> + return 0;
> +
> +cb_init_err:
> + cryptodev_cb_cleanup(dev);
> + rte_errno = ENOMEM;
Same here - no need to update rte_errno.
> + return -ENOMEM;
> +}
> +#endif
>
> const char *
> rte_cryptodev_get_feature_name(uint64_t flag)
> @@ -927,6 +1048,11 @@ struct rte_cryptodev *
>
> RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_configure, -ENOTSUP);
>
> +#ifdef RTE_CRYPTO_CALLBACKS
> + rte_spinlock_lock(&rte_cryptodev_callback_lock);
> + cryptodev_cb_cleanup(dev);
> + rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> +#endif
> /* Setup new number of queue pairs and reconfigure device. */
> diag = rte_cryptodev_queue_pairs_config(dev, config->nb_queue_pairs,
> config->socket_id);
> @@ -936,11 +1062,19 @@ struct rte_cryptodev *
> return diag;
> }
>
> +#ifdef RTE_CRYPTO_CALLBACKS
> + rte_spinlock_lock(&rte_cryptodev_callback_lock);
> + diag = cryptodev_cb_init(dev);
> + rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> + if (diag) {
> + CDEV_LOG_ERR("Callback init failed for dev_id=%d", dev_id);
> + return diag;
> + }
> +#endif
> rte_cryptodev_trace_configure(dev_id, config);
> return (*dev->dev_ops->dev_configure)(dev, config);
> }
>
> -
> int
> rte_cryptodev_start(uint8_t dev_id)
> {
> @@ -1136,6 +1270,289 @@ struct rte_cryptodev *
> socket_id);
> }
>
> +#ifdef RTE_CRYPTO_CALLBACKS
> +struct rte_cryptodev_cb *
> +rte_cryptodev_add_enq_callback(uint8_t dev_id,
> + uint16_t qp_id,
> + rte_cryptodev_callback_fn cb_fn,
> + void *cb_arg)
> +{
> + struct rte_cryptodev *dev;
> + struct rte_cryptodev_cb_rcu *list;
> + struct rte_cryptodev_cb *cb, *tail;
> +
> + if (!cb_fn) {
> + CDEV_LOG_ERR("Callback is NULL on dev_id=%d", dev_id);
> + rte_errno = EINVAL;
> + return NULL;
> + }
> +
> + if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
> + CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
> + rte_errno = ENODEV;
> + return NULL;
> + }
> +
> + dev = &rte_crypto_devices[dev_id];
> + if (qp_id >= dev->data->nb_queue_pairs) {
> + CDEV_LOG_ERR("Invalid queue_pair_id=%d", qp_id);
> + rte_errno = ENODEV;
> + return NULL;
> + }
> +
> + cb = rte_zmalloc(NULL, sizeof(*cb), 0);
> + if (cb == NULL) {
> + CDEV_LOG_ERR("Failed to allocate memory for callback on "
> + "dev=%d, queue_pair_id=%d", dev_id, qp_id);
> + rte_errno = ENOMEM;
> + return NULL;
> + }
> +
> + rte_spinlock_lock(&rte_cryptodev_callback_lock);
> +
> + cb->fn = cb_fn;
> + cb->arg = cb_arg;
> +
> + /* Add the callbacks in fifo order. */
> + list = &dev->enq_cbs[qp_id];
> + tail = list->next;
> +
> + if (tail) {
> + while (tail->next)
> + tail = tail->next;
> + /* Stores to cb->fn and cb->param should complete before
> + * cb is visible to data plane.
> + */
> + __atomic_store_n(&tail->next, cb, __ATOMIC_RELEASE);
> + } else {
> + /* Stores to cb->fn and cb->param should complete before
> + * cb is visible to data plane.
> + */
> + __atomic_store_n(&list->next, cb, __ATOMIC_RELEASE);
> + }
> +
> + rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> +
> + return cb;
> +}
> +
> +int
> +rte_cryptodev_remove_enq_callback(uint8_t dev_id,
> + uint16_t qp_id,
> + struct rte_cryptodev_cb *cb)
> +{
> + struct rte_cryptodev *dev;
> + struct rte_cryptodev_cb **prev_cb, *curr_cb;
> + struct rte_cryptodev_cb_rcu *list;
> + int ret;
> +
> + ret = -EINVAL;
> +
> + if (!cb) {
> + CDEV_LOG_ERR("Callback is NULL");
> + rte_errno = EINVAL;
Same story here - no need to update rte_errno, if we provide error code
as return value.
> + return -EINVAL;
> + }
> +
> + if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
> + CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
> + rte_errno = ENODEV;
> + return -ENODEV;
> + }
> +
> + dev = &rte_crypto_devices[dev_id];
> + if (qp_id >= dev->data->nb_queue_pairs) {
> + CDEV_LOG_ERR("Invalid queue_pair_id=%d", qp_id);
> + rte_errno = ENODEV;
> + return -ENODEV;
> + }
> +
> + rte_spinlock_lock(&rte_cryptodev_callback_lock);
> + if (dev->enq_cbs == NULL) {
> + CDEV_LOG_ERR("Callback not initialized");
> + rte_errno = EINVAL;
> + goto cb_err;
> + }
> +
> + list = &dev->enq_cbs[qp_id];
> + if (list == NULL) {
> + CDEV_LOG_ERR("Callback list is NULL");
> + rte_errno = EINVAL;
> + goto cb_err;
> + }
> +
> + if (list->qsbr == NULL) {
> + CDEV_LOG_ERR("Rcu qsbr is NULL");
> + rte_errno = EINVAL;
> + goto cb_err;
> + }
> +
> + prev_cb = &list->next;
> + for (; *prev_cb != NULL; prev_cb = &curr_cb->next) {
> + curr_cb = *prev_cb;
> + if (curr_cb == cb) {
> + /* Remove the user cb from the callback list. */
> + __atomic_store_n(prev_cb, curr_cb->next,
> + __ATOMIC_RELAXED);
> + ret = 0;
> + break;
> + }
> + }
> +
> + if (!ret) {
> + /* Call sync with invalid thread id as this is part of
> + * control plane API
> + */
> + rte_rcu_qsbr_synchronize(list->qsbr, RTE_QSBR_THRID_INVALID);
> + rte_free(cb);
> + }
> +
> +cb_err:
> + rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> + return ret;
> +}
> +
> +struct rte_cryptodev_cb *
> +rte_cryptodev_add_deq_callback(uint8_t dev_id,
> + uint16_t qp_id,
> + rte_cryptodev_callback_fn cb_fn,
> + void *cb_arg)
> +{
> + struct rte_cryptodev *dev;
> + struct rte_cryptodev_cb_rcu *list;
> + struct rte_cryptodev_cb *cb, *tail;
> +
> + if (!cb_fn) {
> + CDEV_LOG_ERR("Callback is NULL on dev_id=%d", dev_id);
> + rte_errno = EINVAL;
> + return NULL;
> + }
> +
> + if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
> + CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
> + rte_errno = ENODEV;
> + return NULL;
> + }
> +
> + dev = &rte_crypto_devices[dev_id];
> + if (qp_id >= dev->data->nb_queue_pairs) {
> + CDEV_LOG_ERR("Invalid queue_pair_id=%d", qp_id);
> + rte_errno = ENODEV;
> + return NULL;
> + }
> +
> + cb = rte_zmalloc(NULL, sizeof(*cb), 0);
> + if (cb == NULL) {
> + CDEV_LOG_ERR("Failed to allocate memory for callback on "
> + "dev=%d, queue_pair_id=%d", dev_id, qp_id);
> + rte_errno = ENOMEM;
> + return NULL;
> + }
> +
> + rte_spinlock_lock(&rte_cryptodev_callback_lock);
> +
> + cb->fn = cb_fn;
> + cb->arg = cb_arg;
> +
> + /* Add the callbacks in fifo order. */
> + list = &dev->deq_cbs[qp_id];
> + tail = list->next;
> +
> + if (tail) {
> + while (tail->next)
> + tail = tail->next;
> + /* Stores to cb->fn and cb->param should complete before
> + * cb is visible to data plane.
> + */
> + __atomic_store_n(&tail->next, cb, __ATOMIC_RELEASE);
> + } else {
> + /* Stores to cb->fn and cb->param should complete before
> + * cb is visible to data plane.
> + */
> + __atomic_store_n(&list->next, cb, __ATOMIC_RELEASE);
> + }
> +
> + rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> +
> + return cb;
> +}
> +
> +int
> +rte_cryptodev_remove_deq_callback(uint8_t dev_id,
> + uint16_t qp_id,
> + struct rte_cryptodev_cb *cb)
> +{
> + struct rte_cryptodev *dev;
> + struct rte_cryptodev_cb **prev_cb, *curr_cb;
> + struct rte_cryptodev_cb_rcu *list;
> + int ret;
> +
> + ret = -EINVAL;
> +
> + if (!cb) {
> + CDEV_LOG_ERR("Callback is NULL");
> + rte_errno = EINVAL;
> + return -EINVAL;
> + }
> +
> + if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
> + CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
> + rte_errno = ENODEV;
> + return -ENODEV;
> + }
> +
> + dev = &rte_crypto_devices[dev_id];
> + if (qp_id >= dev->data->nb_queue_pairs) {
> + CDEV_LOG_ERR("Invalid queue_pair_id=%d", qp_id);
> + rte_errno = ENODEV;
> + return -ENODEV;
> + }
> +
> + rte_spinlock_lock(&rte_cryptodev_callback_lock);
> + if (dev->enq_cbs == NULL) {
> + CDEV_LOG_ERR("Callback not initialized");
> + rte_errno = EINVAL;
> + goto cb_err;
> + }
> +
> + list = &dev->deq_cbs[qp_id];
> + if (list == NULL) {
> + CDEV_LOG_ERR("Callback list is NULL");
> + rte_errno = EINVAL;
> + goto cb_err;
> + }
> +
> + if (list->qsbr == NULL) {
> + CDEV_LOG_ERR("Rcu qsbr is NULL");
> + rte_errno = EINVAL;
> + goto cb_err;
> + }
> +
> + prev_cb = &list->next;
> + for (; *prev_cb != NULL; prev_cb = &curr_cb->next) {
> + curr_cb = *prev_cb;
> + if (curr_cb == cb) {
> + /* Remove the user cb from the callback list. */
> + __atomic_store_n(prev_cb, curr_cb->next,
> + __ATOMIC_RELAXED);
> + ret = 0;
> + break;
> + }
> + }
> +
> + if (!ret) {
> + /* Call sync with invalid thread id as this is part of
> + * control plane API
> + */
> + rte_rcu_qsbr_synchronize(list->qsbr, RTE_QSBR_THRID_INVALID);
> + rte_free(cb);
> + }
> +
> +cb_err:
> + rte_spinlock_unlock(&rte_cryptodev_callback_lock);
> + return ret;
> +}
> +#endif
>
> int
> rte_cryptodev_stats_get(uint8_t dev_id, struct rte_cryptodev_stats *stats)
> diff --git a/lib/librte_cryptodev/rte_cryptodev.h b/lib/librte_cryptodev/rte_cryptodev.h
> index 0935fd5..3477a37 100644
> --- a/lib/librte_cryptodev/rte_cryptodev.h
> +++ b/lib/librte_cryptodev/rte_cryptodev.h
> @@ -23,6 +23,7 @@
> #include "rte_dev.h"
> #include <rte_common.h>
> #include <rte_config.h>
> +#include <rte_rcu_qsbr.h>
>
> #include "rte_cryptodev_trace_fp.h"
>
> @@ -522,6 +523,32 @@ struct rte_cryptodev_qp_conf {
> /**< The mempool for creating sess private data in sessionless mode */
> };
>
> +#ifdef RTE_CRYPTO_CALLBACKS
> +/**
> + * Function type used for processing crypto ops when enqueue/dequeue burst is
> + * called.
> + *
> + * The callback function is called on enqueue/dequeue burst immediately.
> + *
> + * @param dev_id The identifier of the device.
> + * @param qp_id The index of the queue pair on which ops are
> + * enqueued/dequeued. The value must be in the
> + * range [0, nb_queue_pairs - 1] previously
> + * supplied to *rte_cryptodev_configure*.
> + * @param ops The address of an array of *nb_ops* pointers
> + * to *rte_crypto_op* structures which contain
> + * the crypto operations to be processed.
> + * @param nb_ops The number of operations to process.
> + * @param user_param The arbitrary user parameter passed in by the
> + * application when the callback was originally
> + * registered.
> + * @return The number of ops to be enqueued to the
> + * crypto device.
> + */
> +typedef uint16_t (*rte_cryptodev_callback_fn)(uint16_t dev_id, uint16_t qp_id,
> + struct rte_crypto_op **ops, uint16_t nb_ops, void *user_param);
> +#endif
> +
> /**
> * Typedef for application callback function to be registered by application
> * software for notification of device events
> @@ -822,7 +849,6 @@ struct rte_cryptodev_config {
> enum rte_cryptodev_event_type event,
> rte_cryptodev_cb_fn cb_fn, void *cb_arg);
>
> -
> typedef uint16_t (*dequeue_pkt_burst_t)(void *qp,
> struct rte_crypto_op **ops, uint16_t nb_ops);
> /**< Dequeue processed packets from queue pair of a device. */
> @@ -839,6 +865,33 @@ typedef uint16_t (*enqueue_pkt_burst_t)(void *qp,
> /** Structure to keep track of registered callbacks */
> TAILQ_HEAD(rte_cryptodev_cb_list, rte_cryptodev_callback);
>
> +#ifdef RTE_CRYPTO_CALLBACKS
> +/**
> + * @internal
> + * Structure used to hold information about the callbacks to be called for a
> + * queue pair on enqueue/dequeue.
> + */
> +struct rte_cryptodev_cb {
> + struct rte_cryptodev_cb *next;
> + /** < Pointer to next callback */
> + rte_cryptodev_callback_fn fn;
> + /** < Pointer to callback function */
> + void *arg;
> + /** < Pointer to argument */
> +};
> +
> +/**
> + * @internal
> + * Structure used to hold information about the RCU for a queue pair.
> + */
> +struct rte_cryptodev_cb_rcu {
> + struct rte_cryptodev_cb *next;
> + /** < Pointer to next callback */
> + struct rte_rcu_qsbr *qsbr;
> + /** < RCU QSBR variable per queue pair */
> +};
> +#endif
> +
> /** The data structure associated with each crypto device. */
> struct rte_cryptodev {
> dequeue_pkt_burst_t dequeue_burst;
> @@ -867,6 +920,12 @@ struct rte_cryptodev {
> __extension__
> uint8_t attached : 1;
> /**< Flag indicating the device is attached */
> +
> + struct rte_cryptodev_cb_rcu *enq_cbs;
> + /**< User application callback for pre enqueue processing */
> +
> + struct rte_cryptodev_cb_rcu *deq_cbs;
> + /**< User application callback for post dequeue processing */
> } __rte_cache_aligned;
>
> void *
> @@ -945,6 +1004,30 @@ struct rte_cryptodev_data {
> {
> struct rte_cryptodev *dev = &rte_cryptodevs[dev_id];
>
> +#ifdef RTE_CRYPTO_CALLBACKS
> + if (unlikely(dev->deq_cbs != NULL)) {
> + struct rte_cryptodev_cb_rcu *list;
> + struct rte_cryptodev_cb *cb;
> +
> + /* __ATOMIC_RELEASE memory order was used when the
> + * call back was inserted into the list.
> + * Since there is a clear dependency between loading
> + * cb and cb->fn/cb->next, __ATOMIC_ACQUIRE memory order is
> + * not required.
> + */
> + list = &dev->deq_cbs[qp_id];
> + rte_rcu_qsbr_thread_online(list->qsbr, 0);
> + cb = __atomic_load_n(&list->next, __ATOMIC_RELAXED);
> +
> + while (cb != NULL) {
> + nb_ops = cb->fn(dev_id, qp_id, ops, nb_ops,
> + cb->arg);
> + cb = cb->next;
> + };
> +
> + rte_rcu_qsbr_thread_offline(list->qsbr, 0);
> + }
> +#endif
> nb_ops = (*dev->dequeue_burst)
> (dev->data->queue_pairs[qp_id], ops, nb_ops);
>
> @@ -989,6 +1072,31 @@ struct rte_cryptodev_data {
> {
> struct rte_cryptodev *dev = &rte_cryptodevs[dev_id];
>
> +#ifdef RTE_CRYPTO_CALLBACKS
> + if (unlikely(dev->enq_cbs != NULL)) {
> + struct rte_cryptodev_cb_rcu *list;
> + struct rte_cryptodev_cb *cb;
> +
> + /* __ATOMIC_RELEASE memory order was used when the
> + * call back was inserted into the list.
> + * Since there is a clear dependency between loading
> + * cb and cb->fn/cb->next, __ATOMIC_ACQUIRE memory order is
> + * not required.
> + */
> + list = &dev->enq_cbs[qp_id];
> + rte_rcu_qsbr_thread_online(list->qsbr, 0);
> + cb = __atomic_load_n(&list->next, __ATOMIC_RELAXED);
> +
> + while (cb != NULL) {
> + nb_ops = cb->fn(dev_id, qp_id, ops, nb_ops,
> + cb->arg);
> + cb = cb->next;
> + };
> +
> + rte_rcu_qsbr_thread_offline(list->qsbr, 0);
> + }
> +#endif
> +
> rte_cryptodev_trace_enqueue_burst(dev_id, qp_id, (void **)ops, nb_ops);
> return (*dev->enqueue_burst)(
> dev->data->queue_pairs[qp_id], ops, nb_ops);
> @@ -1730,6 +1838,156 @@ struct rte_crypto_raw_dp_ctx {
> rte_cryptodev_raw_dequeue_done(struct rte_crypto_raw_dp_ctx *ctx,
> uint32_t n);
>
> +#ifdef RTE_CRYPTO_CALLBACKS
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Add a user callback for a given crypto device and queue pair which will be
> + * called on crypto ops enqueue.
> + *
> + * This API configures a function to be called for each burst of crypto ops
> + * received on a given crypto device queue pair. The return value is a pointer
> + * that can be used later to remove the callback using
> + * rte_cryptodev_remove_enq_callback().
> + *
> + * Callbacks registered by application would not survive
> + * rte_cryptodev_configure() as it reinitializes the callback list.
> + * It is user responsibility to remove all installed callbacks before
> + * calling rte_cryptodev_configure() to avoid possible memory leakage.
> + * Application is expected to call add API after rte_cryptodev_configure().
> + *
> + * Multiple functions can be registered per queue pair & they are called
> + * in the order they were added. The API does not restrict on maximum number
> + * of callbacks.
> + *
> + * @param dev_id The identifier of the device.
> + * @param qp_id The index of the queue pair on which ops are
> + * to be enqueued for processing. The value
> + * must be in the range [0, nb_queue_pairs - 1]
> + * previously supplied to
> + * *rte_cryptodev_configure*.
> + * @param cb_fn The callback function
> + * @param cb_arg A generic pointer parameter which will be passed
> + * to each invocation of the callback function on
> + * this crypto device and queue pair.
> + *
> + * @return
> + * NULL on error.
Need to add that rte_errno will contain error code.
> + * On success, a pointer value which can later be used to remove the callback.
> + */
> +
> +__rte_experimental
> +struct rte_cryptodev_cb *
> +rte_cryptodev_add_enq_callback(uint8_t dev_id,
> + uint16_t qp_id,
> + rte_cryptodev_callback_fn cb_fn,
> + void *cb_arg);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Remove a user callback function for given crypto device and queue pair.
> + *
> + * This function is used to remove enqueue callbacks that were added to a
> + * crypto device queue pair using rte_cryptodev_add_enq_callback().
> + *
> + *
> + *
> + * @param dev_id The identifier of the device.
> + * @param qp_id The index of the queue pair on which ops are
> + * to be enqueued. The value must be in the
> + * range [0, nb_queue_pairs - 1] previously
> + * supplied to *rte_cryptodev_configure*.
> + * @param cb Pointer to user supplied callback created via
> + * rte_cryptodev_add_enq_callback().
> + *
> + * @return
> + * - 0: Success. Callback was removed.
> + * - -EINVAL: The dev_id or the qp_id is out of range, or the callback
> + * is NULL or not found for the crypto device queue pair.
> + */
> +
> +__rte_experimental
> +int rte_cryptodev_remove_enq_callback(uint8_t dev_id,
> + uint16_t qp_id,
> + struct rte_cryptodev_cb *cb);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Add a user callback for a given crypto device and queue pair which will be
> + * called on crypto ops dequeue.
> + *
> + * This API configures a function to be called for each burst of crypto ops
> + * received on a given crypto device queue pair. The return value is a pointer
> + * that can be used later to remove the callback using
> + * rte_cryptodev_remove_deq_callback().
> + *
> + * Callbacks registered by application would not survive
> + * rte_cryptodev_configure() as it reinitializes the callback list.
> + * It is user responsibility to remove all installed callbacks before
> + * calling rte_cryptodev_configure() to avoid possible memory leakage.
> + * Application is expected to call add API after rte_cryptodev_configure().
> + *
> + * Multiple functions can be registered per queue pair & they are called
> + * in the order they were added. The API does not restrict on maximum number
> + * of callbacks.
> + *
> + * @param dev_id The identifier of the device.
> + * @param qp_id The index of the queue pair on which ops are
> + * to be dequeued. The value must be in the
> + * range [0, nb_queue_pairs - 1] previously
> + * supplied to *rte_cryptodev_configure*.
> + * @param cb_fn The callback function
> + * @param cb_arg A generic pointer parameter which will be passed
> + * to each invocation of the callback function on
> + * this crypto device and queue pair.
> + *
> + * @return
> + * NULL on error.
> + * On success, a pointer value which can later be used to remove the callback.
> + */
> +
> +__rte_experimental
> +struct rte_cryptodev_cb *
> +rte_cryptodev_add_deq_callback(uint8_t dev_id,
> + uint16_t qp_id,
> + rte_cryptodev_callback_fn cb_fn,
> + void *cb_arg);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice
> + *
> + * Remove a user callback function for given crypto device and queue pair.
> + *
> + * This function is used to remove dequeue callbacks that were added to a
> + * crypto device queue pair using rte_cryptodev_add_deq_callback().
> + *
> + *
> + *
> + * @param dev_id The identifier of the device.
> + * @param qp_id The index of the queue pair on which ops are
> + * to be dequeued. The value must be in the
> + * range [0, nb_queue_pairs - 1] previously
> + * supplied to *rte_cryptodev_configure*.
> + * @param cb Pointer to user supplied callback created via
> + * rte_cryptodev_add_deq_callback().
> + *
> + * @return
> + * - 0: Success. Callback was removed.
> + * - -EINVAL: The dev_id or the qp_id is out of range, or the callback
> + * is NULL or not found for the crypto device queue pair.
> + */
> +__rte_experimental
> +int rte_cryptodev_remove_deq_callback(uint8_t dev_id,
> + uint16_t qp_id,
> + struct rte_cryptodev_cb *cb);
> +#endif
> +
> #ifdef __cplusplus
> }
> #endif
> diff --git a/lib/librte_cryptodev/rte_cryptodev_version.map b/lib/librte_cryptodev/rte_cryptodev_version.map
> index 7e4360f..429b03e 100644
> --- a/lib/librte_cryptodev/rte_cryptodev_version.map
> +++ b/lib/librte_cryptodev/rte_cryptodev_version.map
> @@ -101,6 +101,8 @@ EXPERIMENTAL {
> rte_cryptodev_get_qp_status;
>
> # added in 20.11
> + rte_cryptodev_add_deq_callback;
> + rte_cryptodev_add_enq_callback;
> rte_cryptodev_configure_raw_dp_ctx;
> rte_cryptodev_get_raw_dp_ctx_size;
> rte_cryptodev_raw_dequeue;
> @@ -109,4 +111,6 @@ EXPERIMENTAL {
> rte_cryptodev_raw_enqueue;
> rte_cryptodev_raw_enqueue_burst;
> rte_cryptodev_raw_enqueue_done;
> + rte_cryptodev_remove_deq_callback;
> + rte_cryptodev_remove_enq_callback;
> };
> --
> 1.9.1
More information about the dev
mailing list