[dpdk-dev] [PATCH v5 11/11] build: update Arm builds with makefile flags
Bruce Richardson
bruce.richardson at intel.com
Wed Oct 28 16:08:10 CET 2020
On Wed, Oct 28, 2020 at 03:04:05PM +0100, Juraj Linkeš wrote:
> Not all flags were moved properly from the old Makefile build system.
> Disable corresponding drivers and libnuma in cross files and remove
> deprecated config.
>
> Signed-off-by: Juraj Linkeš <juraj.linkes at pantheon.tech>
> ---
> config/arm/arm64_armada_linux_gcc | 2 ++
> config/arm/arm64_armv8_linux_gcc | 8 ++++++--
> config/arm/arm64_bluefield_linux_gcc | 1 +
> config/arm/arm64_dpaa_linux_gcc | 1 +
> config/arm/arm64_n1sdp_linux_gcc | 1 +
> config/arm/arm64_octeontx2_linux_gcc | 1 +
> config/arm/arm64_stingray_linux_gcc | 1 +
> config/arm/meson.build | 5 ++++-
> drivers/meson.build | 4 ++++
> 9 files changed, 21 insertions(+), 3 deletions(-)
>
> diff --git a/config/arm/arm64_armada_linux_gcc b/config/arm/arm64_armada_linux_gcc
> index 36100c594..e33f1e742 100644
> --- a/config/arm/arm64_armada_linux_gcc
> +++ b/config/arm/arm64_armada_linux_gcc
> @@ -17,3 +17,5 @@ endian = 'little'
> implementer_id = '0x56'
> max_numa_nodes = 1
> max_lcores = 16
> +has_libnuma = 0
> +disabled_drivers = ['bus/dpaa', 'bus/fslmc', 'common/dpaax']
Changes to disabled drivers should be merged in the previous patch.
> diff --git a/config/arm/arm64_armv8_linux_gcc b/config/arm/arm64_armv8_linux_gcc
> index 779333199..c6010e303 100644
> --- a/config/arm/arm64_armv8_linux_gcc
> +++ b/config/arm/arm64_armv8_linux_gcc
> @@ -28,7 +28,11 @@ implementer_id = 'generic'
> part_number = 'generic'
>
> # Supported extra configuration
> -# max_numa_nodes = n # will set RTE_MAX_NUMA_NODES
> -# max_lcores = n # will set RTE_MAX_LCORE
> +# max_numa_nodes = n # will set RTE_MAX_NUMA_NODES
> +# max_lcores = n # will set RTE_MAX_LCORE
> max_lcores = 256
> max_numa_nodes = 4
> +
> +# has_libnuma = 0 # set to 0 if the SoC is not a NUMA system
> +# disabled_drivers += ['bus/dpaa', 'crypto']
> + # add to the set of disabled libraries
> diff --git a/config/arm/arm64_bluefield_linux_gcc b/config/arm/arm64_bluefield_linux_gcc
> index 7ff6fd309..e154ac4fd 100644
> --- a/config/arm/arm64_bluefield_linux_gcc
> +++ b/config/arm/arm64_bluefield_linux_gcc
> @@ -17,3 +17,4 @@ implementer_id = '0x41'
> part_number = '0xd08'
> max_numa_nodes = 1
> max_lcores = 16
> +has_libnuma = 0
> diff --git a/config/arm/arm64_dpaa_linux_gcc b/config/arm/arm64_dpaa_linux_gcc
> index adae86f57..78883a2ec 100644
> --- a/config/arm/arm64_dpaa_linux_gcc
> +++ b/config/arm/arm64_dpaa_linux_gcc
> @@ -17,3 +17,4 @@ endian = 'little'
> implementer_id = 'dpaa'
> max_numa_nodes = 1
> max_lcores = 16
> +has_libnuma = 0
> diff --git a/config/arm/arm64_n1sdp_linux_gcc b/config/arm/arm64_n1sdp_linux_gcc
> index 3a8b46812..4493227f3 100644
> --- a/config/arm/arm64_n1sdp_linux_gcc
> +++ b/config/arm/arm64_n1sdp_linux_gcc
> @@ -17,3 +17,4 @@ implementer_id = '0x41'
> part_number = '0xd0c'
> max_numa_nodes = 1
> max_lcores = 4
> +has_libnuma = 0
> diff --git a/config/arm/arm64_octeontx2_linux_gcc b/config/arm/arm64_octeontx2_linux_gcc
> index 2baf95a2a..ff9e5c403 100644
> --- a/config/arm/arm64_octeontx2_linux_gcc
> +++ b/config/arm/arm64_octeontx2_linux_gcc
> @@ -17,3 +17,4 @@ implementer_id = '0x43'
> part_number = '0xb2'
> max_numa_nodes = 1
> max_lcores = 36
> +has_libnuma = 0
> diff --git a/config/arm/arm64_stingray_linux_gcc b/config/arm/arm64_stingray_linux_gcc
> index 7ff6fd309..e154ac4fd 100644
> --- a/config/arm/arm64_stingray_linux_gcc
> +++ b/config/arm/arm64_stingray_linux_gcc
> @@ -17,3 +17,4 @@ implementer_id = '0x41'
> part_number = '0xd08'
> max_numa_nodes = 1
> max_lcores = 16
> +has_libnuma = 0
> diff --git a/config/arm/meson.build b/config/arm/meson.build
> index 21deb2dd9..a023abb17 100644
> --- a/config/arm/meson.build
> +++ b/config/arm/meson.build
> @@ -101,7 +101,6 @@ flags_octeontx2_extra = [
> ['RTE_MACHINE', '"octeontx2"'],
> ['RTE_ARM_FEATURE_ATOMICS', true],
> ['RTE_USE_C11_MEM_MODEL', true],
> - ['RTE_EAL_IGB_UIO', false],
> ['RTE_MAX_LCORE', 36],
> ['RTE_MAX_NUMA_NODES', 1]
> ]
> @@ -236,6 +235,10 @@ else
> ['RTE_MAX_LCORE', cross_max_lcores]
> ]
> endif
> + cross_has_libnuma = meson.get_cross_property('has_libnuma', '')
> + if cross_has_libnuma != ''
> + has_libnuma = cross_has_libnuma
> + endif
> endif
>
> # apply supported machine args
> diff --git a/drivers/meson.build b/drivers/meson.build
> index 4c4866866..a997387ad 100644
> --- a/drivers/meson.build
> +++ b/drivers/meson.build
> @@ -21,6 +21,10 @@ subdirs = [
> disabled_drivers += run_command(list_dir_globs, get_option('disable_drivers'),
> ).stdout().split()
>
> +if meson.is_cross_build()
> + disabled_drivers += meson.get_cross_property('disabled_drivers', [])
> +endif
> +
This change also belongs in the previous patch. However, because of the way
it's done here, I think the change to the disabled_drivers assignment in
the previous patch can be dropped, since assigning using "=" rather than
"+=" is fine when the cross-file addition is done later.
> default_cflags = machine_args
> default_cflags += ['-DALLOW_EXPERIMENTAL_API']
> default_cflags += ['-DALLOW_INTERNAL_API']
> --
> 2.20.1
>
More information about the dev
mailing list