[dpdk-dev] [PATCH v2 7/8] net/hns3: add restriction on setting VF MTU

Wei Hu (Xavier) huwei013 at chinasoftinc.com
Wed Sep 9 11:23:38 CEST 2020


From: "Wei Hu (Xavier)" <xavier.huwei at huawei.com>

when Rx of scattered packets is off, we have some possibility of using
vector Rx process function or simple Rx functions in hns3 PMD driver.
If the input MTU is increased and the maximum length of received packets
is greater than the length of a buffer for Rx packets, the hardware network
engine needs to use multiple BDs and buffers to store these packets. This
will cause problems when still using vector Rx process function or simple
Rx function to receiving packets. So, when Rx of scattered packets is off
and device is started, it is not permitted to increase MTU so that the
maximum length of Rx packets is greater than Rx buffer length.

Signed-off-by: Chengwen Feng <fengchengwen at huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei at huawei.com>
---
 drivers/net/hns3/hns3_ethdev_vf.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/net/hns3/hns3_ethdev_vf.c b/drivers/net/hns3/hns3_ethdev_vf.c
index 93f2c93..44e51b5 100644
--- a/drivers/net/hns3/hns3_ethdev_vf.c
+++ b/drivers/net/hns3/hns3_ethdev_vf.c
@@ -871,6 +871,25 @@ hns3vf_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 		return -EIO;
 	}
 
+	/*
+	 * when Rx of scattered packets is off, we have some possibility of
+	 * using vector Rx process function or simple Rx functions in hns3 PMD
+	 * driver. If the input MTU is increased and the maximum length of
+	 * received packets is greater than the length of a buffer for Rx
+	 * packet, the hardware network engine needs to use multiple BDs and
+	 * buffers to store these packets. This will cause problems when still
+	 * using vector Rx process function or simple Rx function to receiving
+	 * packets. So, when Rx of scattered packets is off and device is
+	 * started, it is not permitted to increase MTU so that the maximum
+	 * length of Rx packets is greater than Rx buffer length.
+	 */
+	if (dev->data->dev_started && !dev->data->scattered_rx &&
+	    frame_size > hw->rx_buf_len) {
+		hns3_err(hw, "failed to set mtu because current is "
+			"not scattered rx mode");
+		return -EOPNOTSUPP;
+	}
+
 	rte_spinlock_lock(&hw->lock);
 	ret = hns3vf_config_mtu(hw, mtu);
 	if (ret) {
-- 
2.9.5



More information about the dev mailing list