[dpdk-dev] [PATCH v2] doc: fix grammatical error

Sarosh Arif sarosh.arif at emumba.com
Wed Sep 16 13:14:38 CEST 2020


This patch corrects a grammatical error by changing 'an DPDK' to 'a DPDK',
so that the sentences can become grammatically accurate. 

Signed-off-by: Sarosh Arif <sarosh.arif at emumba.com>
---
 doc/guides/linux_gsg/build_sample_apps.rst        | 4 ++--
 doc/guides/linux_gsg/enable_func.rst              | 2 +-
 doc/guides/linux_gsg/linux_drivers.rst            | 2 +-
 doc/guides/linux_gsg/sys_reqs.rst                 | 2 +-
 doc/guides/prog_guide/multi_proc_support.rst      | 2 +-
 doc/guides/sample_app_ug/l3_forward_power_man.rst | 2 +-
 6 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/doc/guides/linux_gsg/build_sample_apps.rst b/doc/guides/linux_gsg/build_sample_apps.rst
index 2882883f9..da3eea306 100644
--- a/doc/guides/linux_gsg/build_sample_apps.rst
+++ b/doc/guides/linux_gsg/build_sample_apps.rst
@@ -4,7 +4,7 @@
 Compiling and Running Sample Applications
 =========================================
 
-The chapter describes how to compile and run applications in an DPDK environment.
+The chapter describes how to compile and run applications in a DPDK environment.
 It also provides a pointer to where sample applications are stored.
 
 .. note::
@@ -136,7 +136,7 @@ Each bit of the mask corresponds to the equivalent logical core number as report
 Since these logical core numbers, and their mapping to specific cores on specific NUMA sockets, can vary from platform to platform,
 it is recommended that the core layout for each platform be considered when choosing the coremask/corelist to use in each case.
 
-On initialization of the EAL layer by an DPDK application, the logical cores to be used and their socket location are displayed.
+On initialization of the EAL layer by a DPDK application, the logical cores to be used and their socket location are displayed.
 This information can also be determined for all cores on the system by examining the ``/proc/cpuinfo`` file, for example, by running cat ``/proc/cpuinfo``.
 The physical id attribute listed for each processor indicates the CPU socket to which it belongs.
 This can be useful when using other processors to understand the mapping of the logical cores to the sockets.
diff --git a/doc/guides/linux_gsg/enable_func.rst b/doc/guides/linux_gsg/enable_func.rst
index b2bda80bb..ad11bc9e4 100644
--- a/doc/guides/linux_gsg/enable_func.rst
+++ b/doc/guides/linux_gsg/enable_func.rst
@@ -112,7 +112,7 @@ In addition, C3 and C6 should be enabled as well for power management. The path
 Using Linux Core Isolation to Reduce Context Switches
 -----------------------------------------------------
 
-While the threads used by an DPDK application are pinned to logical cores on the system,
+While the threads used by a DPDK application are pinned to logical cores on the system,
 it is possible for the Linux scheduler to run other tasks on those cores also.
 To help prevent additional workloads from running on those cores,
 it is possible to use the ``isolcpus`` Linux kernel parameter to isolate them from the general Linux scheduler.
diff --git a/doc/guides/linux_gsg/linux_drivers.rst b/doc/guides/linux_gsg/linux_drivers.rst
index 185074013..ccd93464a 100644
--- a/doc/guides/linux_gsg/linux_drivers.rst
+++ b/doc/guides/linux_gsg/linux_drivers.rst
@@ -159,7 +159,7 @@ Binding and Unbinding Network Ports to/from the Kernel Modules
     PMDs Which use the bifurcated driver should not be unbind from their kernel drivers. this section is for PMDs which use the UIO or VFIO drivers.
 
 As of release 1.4, DPDK applications no longer automatically unbind all supported network ports from the kernel driver in use.
-Instead, in case the PMD being used use the UIO or VFIO drivers, all ports that are to be used by an DPDK application must be bound to the
+Instead, in case the PMD being used use the UIO or VFIO drivers, all ports that are to be used by a DPDK application must be bound to the
 ``uio_pci_generic``, ``igb_uio`` or ``vfio-pci`` module before the application is run.
 For such PMDs, any network ports under Linux* control will be ignored and cannot be used by the application.
 
diff --git a/doc/guides/linux_gsg/sys_reqs.rst b/doc/guides/linux_gsg/sys_reqs.rst
index 6b9f573fc..5997ab06b 100644
--- a/doc/guides/linux_gsg/sys_reqs.rst
+++ b/doc/guides/linux_gsg/sys_reqs.rst
@@ -101,7 +101,7 @@ e.g. :doc:`../nics/index`
 Running DPDK Applications
 -------------------------
 
-To run an DPDK application, some customization may be required on the target machine.
+To run a DPDK application, some customization may be required on the target machine.
 
 System Software
 ~~~~~~~~~~~~~~~
diff --git a/doc/guides/prog_guide/multi_proc_support.rst b/doc/guides/prog_guide/multi_proc_support.rst
index a84083b96..1a4a9e2d4 100644
--- a/doc/guides/prog_guide/multi_proc_support.rst
+++ b/doc/guides/prog_guide/multi_proc_support.rst
@@ -75,7 +75,7 @@ and point to the same objects, in both processes.
 
 
 The EAL also supports an auto-detection mode (set by EAL ``--proc-type=auto`` flag ),
-whereby an DPDK process is started as a secondary instance if a primary instance is already running.
+whereby a DPDK process is started as a secondary instance if a primary instance is already running.
 
 Deployment Models
 -----------------
diff --git a/doc/guides/sample_app_ug/l3_forward_power_man.rst b/doc/guides/sample_app_ug/l3_forward_power_man.rst
index 0cc6f2e62..7a9730197 100644
--- a/doc/guides/sample_app_ug/l3_forward_power_man.rst
+++ b/doc/guides/sample_app_ug/l3_forward_power_man.rst
@@ -49,7 +49,7 @@ to set the CPUFreq governor and set the frequency of specific cores.
 
 This application includes a P-state power management algorithm to generate a frequency hint to be sent to CPUFreq.
 The algorithm uses the number of received and available Rx packets on recent polls to make a heuristic decision to scale frequency up/down.
-Specifically, some thresholds are checked to see whether a specific core running an DPDK polling thread needs to increase frequency
+Specifically, some thresholds are checked to see whether a specific core running a DPDK polling thread needs to increase frequency
 a step up based on the near to full trend of polled Rx queues.
 Also, it decreases frequency a step if packet processed per loop is far less than the expected threshold
 or the thread's sleeping time exceeds a threshold.
-- 
2.25.1



More information about the dev mailing list