[dpdk-dev] [PATCH] net: add support for AVX512 when generating CRC
O'loingsigh, Mairtin
mairtin.oloingsigh at intel.com
Tue Sep 29 17:47:25 CEST 2020
Hi,
> -----Original Message-----
> From: De Lara Guarch, Pablo <pablo.de.lara.guarch at intel.com>
> Sent: Friday, September 11, 2020 10:58 AM
> To: O'loingsigh, Mairtin <mairtin.oloingsigh at intel.com>; Singh, Jasvinder
> <jasvinder.singh at intel.com>
> Cc: dev at dpdk.org; Ryan, Brendan <brendan.ryan at intel.com>; Coyle, David
> <david.coyle at intel.com>
> Subject: RE: [PATCH] net: add support for AVX512 when generating CRC
>
> Hi Mairtin,
>
> > -----Original Message-----
> > From: O'loingsigh, Mairtin <mairtin.oloingsigh at intel.com>
> > Sent: Thursday, September 10, 2020 1:01 PM
> > To: Singh, Jasvinder <jasvinder.singh at intel.com>
> > Cc: dev at dpdk.org; Ryan, Brendan <brendan.ryan at intel.com>; Coyle,
> David
> > <david.coyle at intel.com>; De Lara Guarch, Pablo
> > <pablo.de.lara.guarch at intel.com>; O'loingsigh, Mairtin
> > <mairtin.oloingsigh at intel.com>
> > Subject: [PATCH] net: add support for AVX512 when generating CRC
> >
> > This patch enables the generation of CRC using AVX512 instruction set
> > when available on the host platform.
> >
> > Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh at intel.com>
> > ---
> >
> > v1:
> > * Initial version, with AVX512 support for CRC32 Ethernet only
> > (requires further
> > updates)
> > * AVX512 support for CRC16-CCITT and final implementation of
> > CRC32 Ethernet will be added in v2
> > ---
> > doc/guides/rel_notes/release_20_11.rst | 4 +
> > lib/librte_net/net_crc_avx.h | 331
> ++++++++++++++++++++++++++++++++
> > lib/librte_net/rte_net_crc.c | 23 ++-
> > lib/librte_net/rte_net_crc.h | 1 +
> > 4 files changed, 358 insertions(+), 1 deletions(-) create mode
> > 100644 lib/librte_net/net_crc_avx.h
> >
> > diff --git a/doc/guides/rel_notes/release_20_11.rst
> > b/doc/guides/rel_notes/release_20_11.rst
> > index df227a1..d6a84ca 100644
> > --- a/doc/guides/rel_notes/release_20_11.rst
> > +++ b/doc/guides/rel_notes/release_20_11.rst
> > @@ -55,6 +55,10 @@ New Features
> > Also, make sure to start the actual text at the margin.
> > =======================================================
> >
> > +* **Added support for AVX512 in rte_net CRC calculations.**
> > +
> > + Added new CRC32 calculation code using AVX512 instruction set
> > + Added new CRC16-CCITT calculation code using AVX512 instruction set
> >
> > Removed Items
> > -------------
> > diff --git a/lib/librte_net/net_crc_avx.h
> > b/lib/librte_net/net_crc_avx.h new file mode 100644 index
> > 0000000..d9481d5
> > --- /dev/null
> > +++ b/lib/librte_net/net_crc_avx.h
>
> ...
>
> > +static __rte_always_inline uint32_t
> > +crc32_eth_calc_pclmulqdq(
> > + const uint8_t *data,
> > + uint32_t data_len,
> > + uint32_t crc,
> > + const struct crc_pclmulqdq512_ctx *params) {
> > + __m256i b;
> > + __m512i temp, k;
> > + __m512i qw0 = _mm512_set1_epi64(0);
> > + __m512i fold0;
> > + uint32_t n;
>
> This is loading 64 bytes of data, but if seems like only 16 are available, right?
> Should we use _mm_loadu_si128?
>
> > + fold0 = _mm512_xor_si512(fold0, temp);
> > + goto reduction_128_64;
> > + }
> > +
> > + if (unlikely(data_len < 16)) {
> > + /* 0 to 15 bytes */
> > + uint8_t buffer[16] __rte_aligned(16);
> > +
> > + memset(buffer, 0, sizeof(buffer));
> > + memcpy(buffer, data, data_len);
>
> I would use _mm_maskz_loadu_epi8, passing a mask register with ((1 <<
> data_len) - 1).
>
> > +
> > + fold0 = _mm512_load_si512((const __m128i
> *)buffer);
> > + fold0 = _mm512_xor_si512(fold0, temp);
> > + if (unlikely(data_len < 4)) {
> > + fold0 = xmm_shift_left(fold0, 8 - data_len);
> > + goto barret_reduction;
> > + }
> > + fold0 = xmm_shift_left(fold0, 16 - data_len);
> > + goto reduction_128_64;
> > + }
> > + /* 17 to 31 bytes */
> > + fold0 = _mm512_loadu_si512((const __m512i *)data);
>
> Same here. Looks like you are loading too much data?
>
> > + fold0 = _mm512_xor_si512(fold0, temp);
> > + n = 16;
> > + k = params->rk1_rk2;
> > + goto partial_bytes;
> > + }
>
> ...
>
> > +
> > + fold0 = _mm512_xor_si512(fold0, temp);
> > + fold0 = _mm512_xor_si512(fold0, b);
>
> You could use _mm512_ternarylogic_epi64 with 0x96 as to do 2x XORs in one
> instruction.
>
> > + }
> > +
> > + /** Reduction 128 -> 32 Assumes: fold holds 128bit folded data */
> > +reduction_128_64:
> > + k = params->rk5_rk6;
> > +
> > +barret_reduction:
> > + k = params->rk7_rk8;
> > + n = crcr32_reduce_64_to_32(fold0, k);
> > +
> > + return n;
> > +}
> > +
> > +
The latest version of this patch (v3) reworks a lot of this code and address the issues noted above
Mairtin
More information about the dev
mailing list