[dpdk-dev] [PATCH] net/mlx5: fix modify field action order for IPv6

Alexander Kozyrev akozyrev at nvidia.com
Wed Apr 7 03:14:33 CEST 2021


Mellanox hardware can only modify any packet field in 32-bit chunks,
which means 4 such chunks are needed to modify an IPv6 address.
The modification order of these chunks starts from the most significant
bits for the IPv6 address. That leads to confusing results when trying
to modify either source or destination address via the MODIFY_FIELD
action. Fix the order of 32-bit chunks for IPv6 addresses modification
by starting from the least significant bits.

Fixes: 641dbe4fb053 ("net/mlx5: support modify field flow action")
Cc: stable at dpdk.org

Signed-off-by: Alexander Kozyrev <akozyrev at nvidia.com>
---
 drivers/net/mlx5/mlx5_flow_dv.c | 46 +++++++++++++++++----------------
 1 file changed, 24 insertions(+), 22 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index 6f8d16cec3..d3bf093b70 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -1515,8 +1515,9 @@ mlx5_flow_field_id_to_modify_info
 	case RTE_FLOW_FIELD_IPV6_SRC:
 		if (mask) {
 			if (data->offset < 32) {
-				info[idx] = (struct field_modify_info){4, 0,
-						MLX5_MODI_OUT_SIPV6_127_96};
+				info[idx] = (struct field_modify_info){4,
+						4 * idx,
+						MLX5_MODI_OUT_SIPV6_31_0};
 				if (width < 32) {
 					mask[idx] =
 						rte_cpu_to_be_32(0xffffffff >>
@@ -1533,7 +1534,7 @@ mlx5_flow_field_id_to_modify_info
 			if (data->offset < 64) {
 				info[idx] = (struct field_modify_info){4,
 						4 * idx,
-						MLX5_MODI_OUT_SIPV6_95_64};
+						MLX5_MODI_OUT_SIPV6_63_32};
 				if (width < 32) {
 					mask[idx] =
 						rte_cpu_to_be_32(0xffffffff >>
@@ -1549,8 +1550,8 @@ mlx5_flow_field_id_to_modify_info
 			}
 			if (data->offset < 96) {
 				info[idx] = (struct field_modify_info){4,
-						8 * idx,
-						MLX5_MODI_OUT_SIPV6_63_32};
+						4 * idx,
+						MLX5_MODI_OUT_SIPV6_95_64};
 				if (width < 32) {
 					mask[idx] =
 						rte_cpu_to_be_32(0xffffffff >>
@@ -1564,30 +1565,31 @@ mlx5_flow_field_id_to_modify_info
 					break;
 				++idx;
 			}
-			info[idx] = (struct field_modify_info){4, 12 * idx,
-						MLX5_MODI_OUT_SIPV6_31_0};
+			info[idx] = (struct field_modify_info){4, 4 * idx,
+						MLX5_MODI_OUT_SIPV6_127_96};
 			mask[idx] = rte_cpu_to_be_32(0xffffffff >>
 						     (32 - width));
 		} else {
 			if (data->offset < 32)
 				info[idx++] = (struct field_modify_info){4, 0,
-						MLX5_MODI_OUT_SIPV6_127_96};
+						MLX5_MODI_OUT_SIPV6_31_0};
 			if (data->offset < 64)
 				info[idx++] = (struct field_modify_info){4, 0,
-						MLX5_MODI_OUT_SIPV6_95_64};
+						MLX5_MODI_OUT_SIPV6_63_32};
 			if (data->offset < 96)
 				info[idx++] = (struct field_modify_info){4, 0,
-						MLX5_MODI_OUT_SIPV6_63_32};
+						MLX5_MODI_OUT_SIPV6_95_64};
 			if (data->offset < 128)
 				info[idx++] = (struct field_modify_info){4, 0,
-						MLX5_MODI_OUT_SIPV6_31_0};
+						MLX5_MODI_OUT_SIPV6_127_96};
 		}
 		break;
 	case RTE_FLOW_FIELD_IPV6_DST:
 		if (mask) {
 			if (data->offset < 32) {
-				info[idx] = (struct field_modify_info){4, 0,
-						MLX5_MODI_OUT_DIPV6_127_96};
+				info[idx] = (struct field_modify_info){4,
+						4 * idx,
+						MLX5_MODI_OUT_DIPV6_31_0};
 				if (width < 32) {
 					mask[idx] =
 						rte_cpu_to_be_32(0xffffffff >>
@@ -1604,7 +1606,7 @@ mlx5_flow_field_id_to_modify_info
 			if (data->offset < 64) {
 				info[idx] = (struct field_modify_info){4,
 						4 * idx,
-						MLX5_MODI_OUT_DIPV6_95_64};
+						MLX5_MODI_OUT_DIPV6_63_32};
 				if (width < 32) {
 					mask[idx] =
 						rte_cpu_to_be_32(0xffffffff >>
@@ -1620,8 +1622,8 @@ mlx5_flow_field_id_to_modify_info
 			}
 			if (data->offset < 96) {
 				info[idx] = (struct field_modify_info){4,
-						8 * idx,
-						MLX5_MODI_OUT_DIPV6_63_32};
+						4 * idx,
+						MLX5_MODI_OUT_DIPV6_95_64};
 				if (width < 32) {
 					mask[idx] =
 						rte_cpu_to_be_32(0xffffffff >>
@@ -1635,23 +1637,23 @@ mlx5_flow_field_id_to_modify_info
 					break;
 				++idx;
 			}
-			info[idx] = (struct field_modify_info){4, 12 * idx,
-						MLX5_MODI_OUT_DIPV6_31_0};
+			info[idx] = (struct field_modify_info){4, 4 * idx,
+						MLX5_MODI_OUT_DIPV6_127_96};
 			mask[idx] = rte_cpu_to_be_32(0xffffffff >>
 						     (32 - width));
 		} else {
 			if (data->offset < 32)
 				info[idx++] = (struct field_modify_info){4, 0,
-						MLX5_MODI_OUT_DIPV6_127_96};
+						MLX5_MODI_OUT_DIPV6_31_0};
 			if (data->offset < 64)
 				info[idx++] = (struct field_modify_info){4, 0,
-						MLX5_MODI_OUT_DIPV6_95_64};
+						MLX5_MODI_OUT_DIPV6_63_32};
 			if (data->offset < 96)
 				info[idx++] = (struct field_modify_info){4, 0,
-						MLX5_MODI_OUT_DIPV6_63_32};
+						MLX5_MODI_OUT_DIPV6_95_64};
 			if (data->offset < 128)
 				info[idx++] = (struct field_modify_info){4, 0,
-						MLX5_MODI_OUT_DIPV6_31_0};
+						MLX5_MODI_OUT_DIPV6_127_96};
 		}
 		break;
 	case RTE_FLOW_FIELD_TCP_PORT_SRC:
-- 
2.24.1



More information about the dev mailing list