[dpdk-dev] [PATCH 11/12] net/hns3: add supported ptypes list for RXD advanced layout

[Min Hu (Connor)]

From: Chengwen Feng <fengchengwen at huawei.com>

Kunpeng 930 supports RXD advanced layout. If enabled the layout, the
hardware will report packet type by 8-bit PTYPE filed in the Rx
descriptor, and the supported ptypes are different from original
scheme. So this patch adds supported list for RXD advanced layout.

Fixes: fb5e90694022 ("net/hns3: support Rx descriptor advanced layout")

Signed-off-by: Chengwen Feng <fengchengwen at huawei.com>
Signed-off-by: Min Hu (Connor) <humin29 at huawei.com>
---
 drivers/net/hns3/hns3_rxtx.c | 37 +++++++++++++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

diff --git a/drivers/net/hns3/hns3_rxtx.c b/drivers/net/hns3/hns3_rxtx.c
index c524d5a..59fb974 100644
--- a/drivers/net/hns3/hns3_rxtx.c
+++ b/drivers/net/hns3/hns3_rxtx.c
@@ -1991,12 +1991,45 @@ hns3_dev_supported_ptypes_get(struct rte_eth_dev *dev)
 		RTE_PTYPE_TUNNEL_NVGRE,
 		RTE_PTYPE_UNKNOWN
 	};
+	static const uint32_t adv_layout_ptypes[] = {
+		RTE_PTYPE_L2_ETHER,
+		RTE_PTYPE_L2_ETHER_TIMESYNC,
+		RTE_PTYPE_L2_ETHER_LLDP,
+		RTE_PTYPE_L2_ETHER_ARP,
+		RTE_PTYPE_L3_IPV4_EXT_UNKNOWN,
+		RTE_PTYPE_L3_IPV6_EXT_UNKNOWN,
+		RTE_PTYPE_L4_FRAG,
+		RTE_PTYPE_L4_NONFRAG,
+		RTE_PTYPE_L4_UDP,
+		RTE_PTYPE_L4_TCP,
+		RTE_PTYPE_L4_SCTP,
+		RTE_PTYPE_L4_IGMP,
+		RTE_PTYPE_L4_ICMP,
+		RTE_PTYPE_TUNNEL_GRE,
+		RTE_PTYPE_TUNNEL_GRENAT,
+		RTE_PTYPE_INNER_L2_ETHER,
+		RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN,
+		RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN,
+		RTE_PTYPE_INNER_L4_FRAG,
+		RTE_PTYPE_INNER_L4_ICMP,
+		RTE_PTYPE_INNER_L4_NONFRAG,
+		RTE_PTYPE_INNER_L4_UDP,
+		RTE_PTYPE_INNER_L4_TCP,
+		RTE_PTYPE_INNER_L4_SCTP,
+		RTE_PTYPE_INNER_L4_ICMP,
+		RTE_PTYPE_UNKNOWN
+	};
+	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 
 	if (dev->rx_pkt_burst == hns3_recv_pkts_simple ||
 	    dev->rx_pkt_burst == hns3_recv_scattered_pkts ||
 	    dev->rx_pkt_burst == hns3_recv_pkts_vec ||
-	    dev->rx_pkt_burst == hns3_recv_pkts_vec_sve)
-		return ptypes;
+	    dev->rx_pkt_burst == hns3_recv_pkts_vec_sve) {
+		if (hns3_dev_rxd_adv_layout_supported(hw))
+			return adv_layout_ptypes;
+		else
+			return ptypes;
+	}
 
 	return NULL;
 }
-- 
2.7.4