[dpdk-dev] [PATCH 1/4] examples/l3fwd: tune prefetch for better performance

Honnappa Nagarahalli Honnappa.Nagarahalli at arm.com
Tue Apr 13 22:00:16 CEST 2021


<snip>

> On Thu, Mar 18, 2021 at 3:56 PM Ruifeng Wang <ruifeng.wang at arm.com>
> wrote:
> >
> > Packet header is prefetched before packet processing for better memory
> > access performance. As L2 header will be updated by l3fwd, using of
> > prefetch for store hint will set cache line to proper status and
> > reduce cache maintenance overhead.
> 
> The code does read the cache line too. Right?
> 
> >
> > With this change, 12.9% performance uplift was measured on N1SDP
> > platform with MLX5 NIC.
> >
> > Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli at arm.com>
> >
> > Signed-off-by: Ruifeng Wang <ruifeng.wang at arm.com>
> > Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli at arm.com>
> 
> 
> On the octeontx2 platform, It is 2% regression.
Thanks Jerin for testing.
It would be good to know the results from others with A72 platforms.

> 
> Looks like micro architecture-specific item of handing write hint on the memory
> the area that does read and write.
> 
> 
> I am testing the LPM lookup miss case.
> 
> My test command:
> ./build/examples/dpdk-l3fwd  -c 0x0100  -- -p 0x1 --config="(0,0,8)" -P
> 
> 
> 
> > ---
> >  examples/l3fwd/l3fwd_lpm_neon.h | 10 +++++-----
> >  1 file changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/examples/l3fwd/l3fwd_lpm_neon.h
> > b/examples/l3fwd/l3fwd_lpm_neon.h index d6c0ba64a..ae8840694 100644
> > --- a/examples/l3fwd/l3fwd_lpm_neon.h
> > +++ b/examples/l3fwd/l3fwd_lpm_neon.h
> > @@ -97,13 +97,13 @@ l3fwd_lpm_send_packets(int nb_rx, struct rte_mbuf
> > **pkts_burst,
> >
> >         if (k) {
> >                 for (i = 0; i < FWDSTEP; i++) {
> > -                       rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[i],
> > +
> > + rte_prefetch0_write(rte_pktmbuf_mtod(pkts_burst[i],
> >                                                 struct rte_ether_hdr *) + 1);
> >                 }
> >
> >                 for (j = 0; j != k - FWDSTEP; j += FWDSTEP) {
> >                         for (i = 0; i < FWDSTEP; i++) {
> > -                               rte_prefetch0(rte_pktmbuf_mtod(
> > +                               rte_prefetch0_write(rte_pktmbuf_mtod(
> >                                                 pkts_burst[j + i + FWDSTEP],
> >                                                 struct rte_ether_hdr *) + 1);
> >                         }
> > @@ -124,17 +124,17 @@ l3fwd_lpm_send_packets(int nb_rx, struct rte_mbuf
> **pkts_burst,
> >                 /* Prefetch last up to 3 packets one by one */
> >                 switch (m) {
> >                 case 3:
> > -                       rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[j],
> > +
> > + rte_prefetch0_write(rte_pktmbuf_mtod(pkts_burst[j],
> >                                                 struct rte_ether_hdr *) + 1);
> >                         j++;
> >                         /* fallthrough */
> >                 case 2:
> > -                       rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[j],
> > +
> > + rte_prefetch0_write(rte_pktmbuf_mtod(pkts_burst[j],
> >                                                 struct rte_ether_hdr *) + 1);
> >                         j++;
> >                         /* fallthrough */
> >                 case 1:
> > -                       rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[j],
> > +
> > + rte_prefetch0_write(rte_pktmbuf_mtod(pkts_burst[j],
> >                                                 struct rte_ether_hdr *) + 1);
> >                         j++;
> >                 }
> > --
> > 2.25.1
> >


More information about the dev mailing list