[dpdk-dev] [PATCH 1/2] raw/ntb: check spad user index

Li, Xiaoyun xiaoyun.li at intel.com
Wed Apr 21 06:54:52 CEST 2021



> -----Original Message-----
> From: Min Hu (Connor) <humin29 at huawei.com>
> Sent: Wednesday, April 21, 2021 12:37
> To: Li, Xiaoyun <xiaoyun.li at intel.com>; dev at dpdk.org
> Cc: Yigit, Ferruh <ferruh.yigit at intel.com>; Wu, Jingjing <jingjing.wu at intel.com>
> Subject: Re: [PATCH 1/2] raw/ntb: check spad user index
> 
> Hi, xiaoyun,
> 
> 在 2021/4/21 11:31, Li, Xiaoyun 写道:
> > Hi
> >
> >> -----Original Message-----
> >> From: Min Hu (Connor) <humin29 at huawei.com>
> >> Sent: Wednesday, April 21, 2021 10:08
> >> To: dev at dpdk.org
> >> Cc: Yigit, Ferruh <ferruh.yigit at intel.com>; Li, Xiaoyun
> >> <xiaoyun.li at intel.com>; Wu, Jingjing <jingjing.wu at intel.com>
> >> Subject: [PATCH 1/2] raw/ntb: check spad user index
> >>
> >> From: Chengwen Feng <fengchengwen at huawei.com>
> >>
> >> This patch adds checking spad user index validity when set or get attr.
> >>
> >> Fixes: 277310027965 ("raw/ntb: introduce NTB raw device driver")
> >> Cc: stable at dpdk.org
> >>
> >> Signed-off-by: Chengwen Feng <fengchengwen at huawei.com>
> >> Signed-off-by: Min Hu (Connor) <humin29 at huawei.com>
> >> ---
> >>   drivers/raw/ntb/ntb.c | 8 ++++++++
> >>   1 file changed, 8 insertions(+)
> >>
> >> diff --git a/drivers/raw/ntb/ntb.c b/drivers/raw/ntb/ntb.c index
> >> 6dd213e..0f0e3f2 100644
> >> --- a/drivers/raw/ntb/ntb.c
> >> +++ b/drivers/raw/ntb/ntb.c
> >> @@ -1080,6 +1080,10 @@ ntb_attr_set(struct rte_rawdev *dev, const
> >> char *attr_name,
> >>   		if (hw->ntb_ops->spad_write == NULL)
> >>   			return -ENOTSUP;
> >>   		index = atoi(&attr_name[NTB_SPAD_USER_LEN]);
> >> +		if (index < 0 || index >= NTB_SPAD_USER_MAX_NUM) {
> >> +			NTB_LOG(ERR, "Invalid attribute (%s)", attr_name);
> >> +			return -EINVAL;
> >> +		}
> >
> > It's unnecessary. The value will be checked in intel_ntb_spad_write(). There
> will be error remind in that.
> >
> Nothing to do with intel_ntb_spad_write. If index is no checked,
> hw->spad_user_list[index] may be be out of memory and result in
> segmentation default.

Are you using this driver externally? Or you just check everything in DPDK.
This is actually only used for ntb example in file trans mode. And only 0 and 1 are used for index.

> 
> 
> >>   		(*hw->ntb_ops->spad_write)(dev, hw->spad_user_list[index],
> >>   					   1, attr_value);
> >>   		NTB_LOG(DEBUG, "Set attribute (%s) Value (%" PRIu64 ")", @@
> >> -1174,6 +1178,10 @@ ntb_attr_get(struct rte_rawdev *dev, const char
> >> *attr_name,
> >>   		if (hw->ntb_ops->spad_read == NULL)
> >>   			return -ENOTSUP;
> >>   		index = atoi(&attr_name[NTB_SPAD_USER_LEN]);
> >> +		if (index < 0 || index >= NTB_SPAD_USER_MAX_NUM) {
> >> +			NTB_LOG(ERR, "Attribute (%s) out of range",
> >> attr_name);
> >> +			return -EINVAL;
> >> +		}
> >
> > Same as above.
> >
> >>   		*attr_value = (*hw->ntb_ops->spad_read)(dev,
> >>   				hw->spad_user_list[index], 0);
> >>   		NTB_LOG(DEBUG, "Attribute (%s) Value (%" PRIu64 ")",
> >> --
> >> 2.7.4
> >
> > .
> >


More information about the dev mailing list