[dpdk-dev] nvgre inner rss problem in mlx5

[Asaf Penso]

What DPDK version are you using?
Can you try using upstream? We had a fix for a similar issue recently.

Regards,
Asaf Penso

From: wenxu <wenxu at ucloud.cn>
Sent: Wednesday, April 28, 2021 8:48 AM
To: Asaf Penso <asafp at nvidia.com>
Cc: dev at dpdk.org
Subject: Re:Re: [dpdk-dev] nvgre inner rss problem in mlx5


rdma-core version is: rdma-core-52mlnx1-1.52104.x86_64


发件人：Asaf Penso <asafp at nvidia.com<mailto:asafp at nvidia.com>>
发送日期：2021-04-28 12:22:32
收件人："dev at dpdk.org<mailto:dev at dpdk.org>" <dev at dpdk.org<mailto:dev at dpdk.org>>,wenxu <wenxu at ucloud.cn<mailto:wenxu at ucloud.cn>>
主题：Re: [dpdk-dev] nvgre inner rss problem in mlx5

Hello Wenxu,
Thank you for reaching us. I would like to know a few more details before I can provide an assistance.
Can you share the version numbers for:
rdma-core
OFED
OS
Regards,
Asaf Penso

________________________________
From: dev <dev-bounces at dpdk.org<mailto:dev-bounces at dpdk.org>> on behalf of wenxu <wenxu at ucloud.cn<mailto:wenxu at ucloud.cn>>
Sent: Wednesday, April 28, 2021 6:47:45 AM
To: dev at dpdk.org<mailto:dev at dpdk.org> <dev at dpdk.org<mailto:dev at dpdk.org>>
Subject: [dpdk-dev] nvgre inner rss problem in mlx5

Hi mlnx teams,


I test the upstream dpdk with the nvgre inner rss action with dpdk-testpmd


# ./dpdk-testpmd -c 0x1f  -n 4 -m 4096 -w "0000:19:00.1"  --huge-dir=/mnt/ovsdpdk  -- --forward-mode=rxonly --rxq=4 --txq=4 --auto-start --nb-cores=4

#  testpmd>> flow create 0 ingress pattern eth / ipv4 / nvgre / end actions rss level 2 types ip udp tcp end queues 0 1 2 3 end / end


Add rte flow for nvgre wit action inner（level 2） rss to the queues 0,1,2,3.


And I test this with the same underlay tunnel but differrent inner ip address/udp ports. But Only one queue recieve the packet.




And if I test this with vxlan case. it works as we expect.
testpmd>> flow create 0 ingress pattern eth / ipv4 / udp / vxlan / end actions rss level 2 types ip udp tcp end queues 0 1 2 3 end / end




# lspci | grep Ether
19:00.0 Ethernet controller: Mellanox Technologies MT27800 Family [ConnectX-5]
19:00.1 Ethernet controller: Mellanox Technologies MT27800 Family [ConnectX-5]



Fw version is 16.29.1016
# ethtool -i net3
driver: mlx5_core
version: 5.12.0-rc4+
firmware-version: 16.29.1016 (MT_0000000080)


Are there any problems for my test case.


BR
wenxu