[dpdk-dev] [PATCH v2] doc: fix testpmd sample qinq flow rules

[Bernard Iremonger]

In the Testpmd Flow rules management section, correct
the TPID values in the Sample QinQ flow rules sub section.
Also replace the keyword qinq_strip with extend in the
vlan set command.

Fixes: bef3bfe7d5f4 ("doc: revise sample testpmd flow commands")
Cc: stable at dpdk.org

Signed-off-by: Bernard Iremonger <bernard.iremonger at intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 9be4500..6a00245 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -4426,14 +4426,14 @@ Sample QinQ flow rules
 Before creating QinQ rule(s) the following commands should be issued to enable QinQ::
 
    testpmd> port stop 0
-   testpmd> vlan set qinq_strip on 0
+   testpmd> vlan set extend on 0
 
 The above command sets the inner and outer TPID's to 0x8100.
 
 To change the TPID's the following commands should be used::
 
-   testpmd> vlan set outer tpid 0xa100 0
-   testpmd> vlan set inner tpid 0x9100 0
+   testpmd> vlan set outer tpid 0x88A8 0
+   testpmd> vlan set inner tpid 0x8100 0
    testpmd> port start 0
 
 Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM.
-- 
2.7.4