[dpdk-dev] [PATCH 2/2] net/bnxt: mute some failure logs

Kalesh A P kalesh-anakkur.purayil at broadcom.com
Wed Mar 10 08:50:54 CET 2021


From: Kalesh AP <kalesh-anakkur.purayil at broadcom.com>

In the init path, driver ignores few of the HWRM command failures.
There is no need to log the error message in those cases.

Fixes: 3fb93bc7c349 ("net/bnxt: initialize parent PF information")
Fixes: 4e3f887bec4b ("net/bnxt: support HWRM port PHY qcaps")
Cc: stable at dpdk.org

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil at broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde at broadcom.com>
---
 drivers/net/bnxt/bnxt_hwrm.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 582f4d1..8927d41 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -1414,7 +1414,7 @@ int bnxt_hwrm_port_phy_qcaps(struct bnxt *bp)
 
 	rc = bnxt_hwrm_send_message(bp, &req, sizeof(req), BNXT_USE_CHIMP_MB);
 
-	HWRM_CHECK_RESULT();
+	HWRM_CHECK_RESULT_SILENT();
 
 	bp->port_cnt = resp->port_cnt;
 	if (resp->supported_speeds_auto_mode)
@@ -3250,7 +3250,7 @@ int bnxt_hwrm_parent_pf_qcfg(struct bnxt *bp)
 
 	rc = bnxt_hwrm_send_message(bp, &req, sizeof(req), BNXT_USE_CHIMP_MB);
 
-	HWRM_CHECK_RESULT();
+	HWRM_CHECK_RESULT_SILENT();
 
 	memcpy(bp->parent->mac_addr, resp->mac_address, RTE_ETHER_ADDR_LEN);
 	bp->parent->vnic = rte_le_to_cpu_16(resp->dflt_vnic_id);
@@ -3259,7 +3259,7 @@ int bnxt_hwrm_parent_pf_qcfg(struct bnxt *bp)
 
 	/* FIXME: Temporary workaround - remove when firmware issue is fixed. */
 	if (bp->parent->vnic == 0) {
-		PMD_DRV_LOG(ERR, "Error: parent VNIC unavailable.\n");
+		PMD_DRV_LOG(DEBUG, "parent VNIC unavailable.\n");
 		/* Use hard-coded values appropriate for current Wh+ fw. */
 		if (bp->parent->fid == 2)
 			bp->parent->vnic = 0x100;
@@ -4263,7 +4263,7 @@ int bnxt_hwrm_port_led_qcaps(struct bnxt *bp)
 	req.port_id = bp->pf->port_id;
 	rc = bnxt_hwrm_send_message(bp, &req, sizeof(req), BNXT_USE_CHIMP_MB);
 
-	HWRM_CHECK_RESULT();
+	HWRM_CHECK_RESULT_SILENT();
 
 	if (resp->num_leds > 0 && resp->num_leds < BNXT_MAX_LED) {
 		unsigned int i;
-- 
2.10.1



More information about the dev mailing list