[dpdk-dev] [PATCH v2 3/8] eventdev: introduce event vector Tx capability

pbhagavatula at marvell.com pbhagavatula at marvell.com
Tue Mar 16 16:48:40 CET 2021


From: Pavan Nikhilesh <pbhagavatula at marvell.com>

Introduce event vector transmit capability for event eth
tx adapter.

The capability indicates that the Tx adapter is capable of
transmitting event vectors.
When rte_event_vector::union_valid is set, the Tx adapter should
transmit all the packets to the rte_event_vector::port using the
rte_event_vector::queue.
If rte_event_vector::union_valid is not set then the Tx adapter
should peek into each mbuf to get the destination port and queue
pair.

Signed-off-by: Pavan Nikhilesh <pbhagavatula at marvell.com>
Acked-by: Jerin Jacob <jerinj at marvell.com>
---
 doc/guides/prog_guide/event_ethernet_tx_adapter.rst | 12 ++++++++++++
 lib/librte_eventdev/rte_eventdev.h                  |  8 +++++++-
 2 files changed, 19 insertions(+), 1 deletion(-)

diff --git a/doc/guides/prog_guide/event_ethernet_tx_adapter.rst b/doc/guides/prog_guide/event_ethernet_tx_adapter.rst
index a8c13e136..87277dcaf 100644
--- a/doc/guides/prog_guide/event_ethernet_tx_adapter.rst
+++ b/doc/guides/prog_guide/event_ethernet_tx_adapter.rst
@@ -164,3 +164,15 @@ The  ``rte_event_eth_tx_adapter_stats_get()`` function reports counters defined
 in struct ``rte_event_eth_tx_adapter_stats``. The counter values are the sum of
 the counts from the eventdev PMD callback if the callback is supported, and
 the counts maintained by the service function, if one exists.
+
+Tx event vectorization
+~~~~~~~~~~~~~~~~~~~~~~
+
+The event device, ethernet device paris which support the capability
+``RTE_EVENT_ETH_TX_ADAPTER_CAP_EVENT_VECTOR`` can process event vector of mbufs.
+Additionally, application can provide a hint to that Tx adapter that all the
+mbufs are destined to the same ethernet port and queue by setting the bit
+``rte_event_vector::attr_valid`` and filling `rte_event_vector::port`` and
+``rte_event_vector::queue``.
+If ``rte_event_vector::attr_valid`` is not set then the Tx adapter should peek
+into each mbuf and transmit them to the requested ethernet port and queue pair.
diff --git a/lib/librte_eventdev/rte_eventdev.h b/lib/librte_eventdev/rte_eventdev.h
index 963231df4..006b6957a 100644
--- a/lib/librte_eventdev/rte_eventdev.h
+++ b/lib/librte_eventdev/rte_eventdev.h
@@ -910,11 +910,13 @@ struct rte_event_vector {
 	/**< Indicates that the below union attributes have valid information.
 	 */
 	union {
-		/* Used by Rx adapter.
+		/* Used by Rx/Tx adapter.
 		 * Indicats that all the elements in this vector belong to same
 		 * port and queue pair when originating from Rx adapter, valid
 		 * only when event type is ETHDEV_VECTOR or
 		 * ETH_RX_ADAPTER_VECTOR.
+		 * Can also be used to indicate the Tx adapter the destination
+		 * port and queue of the mbufs in the vector
 		 */
 		struct {
 			uint16_t port;
@@ -1268,6 +1270,10 @@ int rte_event_crypto_adapter_caps_get(uint8_t dev_id, uint8_t cdev_id,
 #define RTE_EVENT_ETH_TX_ADAPTER_CAP_INTERNAL_PORT 0x1
 /**< This flag is sent when the PMD supports a packet transmit callback
  */
+#define RTE_EVENT_ETH_TX_ADAPTER_CAP_EVENT_VECTOR	0x2
+/**< Indicates that the Tx adapter is capable of handling event vector of
+ * mbufs.
+ */
 
 /**
  * Retrieve the event device's eth Tx adapter capabilities
-- 
2.17.1



More information about the dev mailing list