[dpdk-dev] [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000

Nishant Verma vnish11 at gmail.com
Wed May 26 06:13:10 CEST 2021


Can you paste output of /proc/meminfo ?



Regards,
NV

On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12 at gmail.com> wrote:

> Hi Team,
>
> I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK
> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE
> Controller but facing following issues:
>
> If someone can look into the following logs and help me figure out the
> issue?
>
>
>
> 1. DPDK 20.11 ( Using 1 GB hugepages)
>
>    gdb ./dpdk-testpmd
>
> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7
>
> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc.
>
> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later
> http://gnu.org/licenses/gpl.html
>
> 12:45:59.349 §This is free software: you are free to change and
> redistribute it.
>
> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law.  Type
> "show copying"
>
> 12:45:59.349 §and "show warranty" for details.
>
> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu".
>
> 12:45:59.351 §For bug reporting instructions, please see:
>
> 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/...
>
> 12:45:59.415 §Reading symbols from
> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging symbols
> found)...done.
>
> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i
>
> 12:46:11.493 §Starting program:
> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i
>
> 12:46:11.717 §[Thread debugging using libthread_db enabled]
>
> 12:46:11.719 §Using host libthread_db library "/lib64/libthread_db.so.1".
>
> 12:46:11.768 §EAL: Detected 6 lcore(s)
>
> 12:46:11.769 §EAL: Detected 1 NUMA nodes
>
> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)]
>
> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>
> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)]
>
> 12:46:11.792 §EAL: Selected IOVA mode 'PA'
>
> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB
>
> 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB
>
> 12:46:11.854 §EAL: Probing VFIO support...
>
> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)]
>
> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)]
>
> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)]
>
> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)]
>
> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)]
>
> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device:
> 0000:65:00.0 (socket 0)
>
> 12:46:11.915 §
>
> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault.
>
> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>
> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install
> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64
> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64
> zlib-1.2.7-19.el7_9.x86_64
>
> 12:46:14.542 §(gdb) bt
>
> 12:46:14.548 §#0  0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>
> 12:46:14.548 §#1  0x0000000000eb811e in ecore_hw_init ()
>
> 12:46:14.549 §#2  0x0000000000ef7397 in qed_slowpath_start ()
>
> 12:46:14.549 §#3  0x0000000000ef0483 in qede_common_dev_init ()
>
> 12:46:14.549 §#4  0x0000000000ef1113 in qede_eth_dev_pci_probe ()
>
> 12:46:14.549 §#5  0x0000000000a4450b in pci_probe ()
>
> 12:46:14.550 §#6  0x00000000009dbc6c in rte_bus_probe ()
>
> 12:46:14.550 §#7  0x00000000009fa91c in rte_eal_init ()
>
> 12:46:14.617 §#8  0x0000000000425db1 in main ()
>
> 12:46:17.052 §(gdb) quit
>
> 12:46:17.056 §A debugging session is active.
>
> 12:46:17.056 §
>
> 12:46:17.057 §        Inferior 1 [process 23180] will be killed.
>
>
>
>
>
> 2. *DPDK 21.05:*
>
>    ./dpdk-testpmd -l 0-5 -n4 -- -i
>
> 12:46:46.257 §EAL: Detected 6 lcore(s)
>
> 12:46:46.257 §EAL: Detected 1 NUMA nodes
>
> 12:46:46.258 §EAL: Detected static linkage of DPDK
>
> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>
> 12:46:46.285 §EAL: Selected IOVA mode 'PA'
>
> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0
>
> 12:46:46.288 §EAL: No available 2048 kB hugepages reported
>
> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device:
> 0000:65:00.0 (socket 0)
>
> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP
> scratch-pad is not configured
>
> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized
>
> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not initialized!
>
> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not
> initialized
>
> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW
> information
>
> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed
>
> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe
> failed rc -3
>
> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used
>
> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created
>
> 12:46:46.423 §testpmd: No probed ethernet devices
>
> 12:46:46.461 §Interactive-mode selected
>
> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456,
> size=2176, socket=0
>
> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc
>
> 12:46:46.540 §Done
>
>
>
>
>
> System Information:
>
> *ethtool -i p2p1*
> driver: qede
> version: 8.33.0.20
> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0*
> expansion-rom-version:
> bus-info: 0000:65:00.0
> supports-statistics: yes
> supports-test: yes
> supports-eeprom-access: no
> supports-register-dump: yes
> supports-priv-flags: yes
>
>
>
> *ethtool -i p2p2 *driver: qede
> version: 8.33.0.20
> firmware-version: mfw 8.24.44.0 storm 8.33.11.0
> expansion-rom-version:
> bus-info: 0000:65:00.1
> supports-statistics: yes
> supports-test: yes
> supports-eeprom-access: no
> supports-register-dump: yes
> supports-priv-flags: yes
>
>
>
>
>
> *lspci -nn | grep Ether*
>
> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and
> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>
> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and
> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>
> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ
> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>
> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ
> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>
>
>
> cd /lib/firmware/qed/
>
> ls
>
> 12:48:27.269 §qed_init_values-8.10.9.0.bin
> qed_init_values-8.30.12.0.bin         qed_init_values_zipped-8.10.5.0.bin
> qed_init_values_zipped-8.33.11.0.bin  qed_init_values_zipped-8.7.3.0.bin
>
> 12:48:27.272 §qed_init_values-8.14.6.0.bin
> qed_init_values-8.33.12.0.bin         qed_init_values_zipped-8.15.3.0.bin
> qed_init_values_zipped-8.37.2.0.bin
>
> 12:48:27.273 §qed_init_values-8.18.9.0.bin
> qed_init_values-8.40.33.0.bin         qed_init_values_zipped-8.20.0.0.bin
> qed_init_values_zipped-8.37.7.0.bin
>
> 12:48:27.275 §qed_init_values-8.20.0.0.bin
> qed_init_values_zipped-8.10.10.0.bin  qed_init_values_zipped-8.33.1.0.bin
> qed_init_values_zipped-8.4.2.0.bin
>
>
> Best Regards
>
> Puneet
>


More information about the dev mailing list