[dpdk-dev] [PATCH 8/9] net/cnxk: allow fc on lbk and enable tm bp on Rx pause
Nithin Dabilpuram
ndabilpuram at marvell.com
Tue Nov 2 16:54:19 CET 2021
Allow flow control on LBK VF's and enable TM to listen on
backpressure when Rx pause is enabled.
Signed-off-by: Nithin Dabilpuram <ndabilpuram at marvell.com>
---
drivers/net/cnxk/cnxk_ethdev.c | 12 ++++++------
drivers/net/cnxk/cnxk_ethdev_ops.c | 14 +++++++++++++-
2 files changed, 19 insertions(+), 7 deletions(-)
diff --git a/drivers/net/cnxk/cnxk_ethdev.c b/drivers/net/cnxk/cnxk_ethdev.c
index 5059fca..a62ded6 100644
--- a/drivers/net/cnxk/cnxk_ethdev.c
+++ b/drivers/net/cnxk/cnxk_ethdev.c
@@ -332,7 +332,7 @@ nix_update_flow_ctrl_config(struct rte_eth_dev *eth_dev)
struct cnxk_fc_cfg *fc = &dev->fc_cfg;
struct rte_eth_fc_conf fc_cfg = {0};
- if (roc_nix_is_vf_or_sdp(&dev->nix))
+ if (roc_nix_is_vf_or_sdp(&dev->nix) && !roc_nix_is_lbk(&dev->nix))
return 0;
fc_cfg.mode = fc->mode;
@@ -1233,6 +1233,11 @@ cnxk_nix_configure(struct rte_eth_dev *eth_dev)
goto cq_fini;
}
+ /* Setup Inline security support */
+ rc = nix_security_setup(dev);
+ if (rc)
+ goto cq_fini;
+
/* Init flow control configuration */
fc_cfg.type = ROC_NIX_FC_RXCHAN_CFG;
fc_cfg.rxchan_cfg.enable = true;
@@ -1249,11 +1254,6 @@ cnxk_nix_configure(struct rte_eth_dev *eth_dev)
goto cq_fini;
}
- /* Setup Inline security support */
- rc = nix_security_setup(dev);
- if (rc)
- goto cq_fini;
-
/*
* Restore queue config when reconfigure followed by
* reconfigure and no queue configure invoked from application case.
diff --git a/drivers/net/cnxk/cnxk_ethdev_ops.c b/drivers/net/cnxk/cnxk_ethdev_ops.c
index baa474f..7b3ee75 100644
--- a/drivers/net/cnxk/cnxk_ethdev_ops.c
+++ b/drivers/net/cnxk/cnxk_ethdev_ops.c
@@ -250,7 +250,7 @@ cnxk_nix_flow_ctrl_set(struct rte_eth_dev *eth_dev,
uint8_t rx_pause, tx_pause;
int rc, i;
- if (roc_nix_is_vf_or_sdp(nix)) {
+ if (roc_nix_is_vf_or_sdp(nix) && !roc_nix_is_lbk(nix)) {
plt_err("Flow control configuration is not allowed on VFs");
return -ENOTSUP;
}
@@ -287,6 +287,18 @@ cnxk_nix_flow_ctrl_set(struct rte_eth_dev *eth_dev,
}
}
+ /* Check if RX pause frame is enabled or not */
+ if (fc->rx_pause ^ rx_pause) {
+ struct roc_nix_fc_cfg fc_cfg;
+
+ memset(&fc_cfg, 0, sizeof(struct roc_nix_fc_cfg));
+ fc_cfg.type = ROC_NIX_FC_TM_CFG;
+ fc_cfg.tm_cfg.enable = !!rx_pause;
+ rc = roc_nix_fc_config_set(nix, &fc_cfg);
+ if (rc)
+ return rc;
+ }
+
rc = roc_nix_fc_mode_set(nix, mode_map[fc_conf->mode]);
if (rc)
return rc;
--
2.8.4
More information about the dev
mailing list