[dpdk-dev] [PATCH 1/3] app/testpmd: fix port status of active slave device

[Singh, Aman Deep]

On 10/25/2021 12:09 PM, Min Hu (Connor) wrote:
> From: Huisong Li <lihuisong at huawei.com>
>
> Stopping a bond device also stops all active slaves under the bond device.
> If this port is bond device, we need to modify the port status of all
> slaves from RTE_PORT_STARTED to RTE_PORT_STOPPED.
>
> Fixes: 0e545d3047fe ("app/testpmd: check stopping port is not in bonding")
> Cc: stable at dpdk.org
>
> Signed-off-by: Huisong Li <lihuisong at huawei.com>
> Signed-off-by: Min Hu (Connor) <humin29 at huawei.com>
> ---

Hi Huisong,

Just wanted to check, if this behaviour can be taken care-off in bonding 
PMD itself.
Or each application will need to in-corporate this change.

Thanks

>   app/test-pmd/cmdline.c |  1 +
>   app/test-pmd/testpmd.c | 49 +++++++++++++++++++++++++++++++++++++++---
>   app/test-pmd/testpmd.h |  3 ++-
>   3 files changed, 49 insertions(+), 4 deletions(-)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index 722f4fb9d9..5bfb4b509b 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -6639,6 +6639,7 @@ static void cmd_create_bonded_device_parsed(void *parsed_result,
>   				"Failed to enable promiscuous mode for port %u: %s - ignore\n",
>   				port_id, rte_strerror(-ret));
>   
> +		ports[port_id].bond_flag = 1;
>   		ports[port_id].need_setup = 0;
>   		ports[port_id].port_status = RTE_PORT_STOPPED;
>   	}
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> index af0e79fe6d..d6b9ebc4dd 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -65,6 +65,9 @@
>   #ifdef RTE_EXEC_ENV_WINDOWS
>   #include <process.h>
>   #endif
> +#ifdef RTE_NET_BOND
> +#include <rte_eth_bond.h>
> +#endif
>   
>   #include "testpmd.h"
>   
> @@ -2986,6 +2989,35 @@ start_port(portid_t pid)
>   	return 0;
>   }
>   
> +#ifdef RTE_NET_BOND
> +static void
> +change_bonding_active_slave_port_status(portid_t bond_pid)
> +{
> +	portid_t slave_pids[RTE_MAX_ETHPORTS];
> +	struct rte_port *port;
> +	int num_active_slaves;
> +	portid_t slave_pid;
> +	int i;
> +
> +	num_active_slaves = rte_eth_bond_active_slaves_get(bond_pid, slave_pids,
> +							   RTE_MAX_ETHPORTS);
> +	if (num_active_slaves < 0) {
> +		fprintf(stderr, "Failed to get slave list for port = %u\n",
> +			bond_pid);
> +		return;
> +	}
> +
> +	for (i = 0; i < num_active_slaves; i++) {
> +		slave_pid = slave_pids[i];
> +		port = &ports[slave_pid];
> +		if (rte_atomic16_cmpset(&(port->port_status),
> +			RTE_PORT_STARTED, RTE_PORT_STOPPED) == 0)
> +			fprintf(stderr, "Port %u can not be set into stopped\n",
> +				slave_pid);
> +	}
> +}
> +#endif
> +
>   void
>   stop_port(portid_t pid)
>   {
> @@ -3042,9 +3074,20 @@ stop_port(portid_t pid)
>   		if (port->flow_list)
>   			port_flow_flush(pi);
>   
> -		if (eth_dev_stop_mp(pi) != 0)
> -			RTE_LOG(ERR, EAL, "rte_eth_dev_stop failed for port %u\n",
> -				pi);
> +		if (is_proc_primary()) {
> +#ifdef RTE_NET_BOND
> +			/*
> +			 * Stopping a bond device also stops all active slaves
> +			 * under the bond device. If this port is bond device,
> +			 * we need to modify the port status of all slaves.
> +			 */
> +			if (port->bond_flag == 1)
> +				change_bonding_active_slave_port_status(pi);
> +#endif
> +			if (rte_eth_dev_stop(pi) != 0)
> +				RTE_LOG(ERR, EAL, "rte_eth_dev_stop failed for port %u\n",
> +					pi);
> +		}
>   
>   		if (rte_atomic16_cmpset(&(port->port_status),
>   			RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index e3995d24ab..ad3b4f875c 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -237,7 +237,8 @@ struct rte_port {
>   	struct rte_eth_txconf   tx_conf[RTE_MAX_QUEUES_PER_PORT+1]; /**< per queue tx configuration */
>   	struct rte_ether_addr   *mc_addr_pool; /**< pool of multicast addrs */
>   	uint32_t                mc_addr_nb; /**< nb. of addr. in mc_addr_pool */
> -	uint8_t                 slave_flag; /**< bonding slave port */
> +	uint8_t                 slave_flag : 1, /**< bonding slave port */
> +				bond_flag : 1; /**< port is bond device */
>   	struct port_flow        *flow_list; /**< Associated flows. */
>   	struct port_indirect_action *actions_list;
>   	/**< Associated indirect actions. */