[dpdk-dev] [PATCH v2 4/9] examples/ipsec-secgw: add stats interval argument

Hemant Agrawal hemant.agrawal at oss.nxp.com
Thu Sep 16 11:13:13 CEST 2021


On 9/15/2021 7:15 PM, Radu Nicolau wrote:
> Add -t for stats screen update interval, disabled by default.
>
> Signed-off-by: Radu Nicolau <radu.nicolau at intel.com>
> ---
>   doc/guides/sample_app_ug/ipsec_secgw.rst |  5 ++++
>   examples/ipsec-secgw/ipsec-secgw.c       | 29 ++++++++++++++++--------
>   examples/ipsec-secgw/ipsec-secgw.h       | 15 ------------
>   3 files changed, 25 insertions(+), 24 deletions(-)
>
> diff --git a/doc/guides/sample_app_ug/ipsec_secgw.rst b/doc/guides/sample_app_ug/ipsec_secgw.rst
> index 20bc1e6bc4..0d55e74022 100644
> --- a/doc/guides/sample_app_ug/ipsec_secgw.rst
> +++ b/doc/guides/sample_app_ug/ipsec_secgw.rst
> @@ -127,6 +127,7 @@ The application has a number of command line options::
>                           -p PORTMASK -P -u PORTMASK -j FRAMESIZE
>                           -l -w REPLAY_WINDOW_SIZE -e -a
>                           -c SAD_CACHE_SIZE
> +                        -t STATISTICS_INTERVAL
>                           -s NUMBER_OF_MBUFS_IN_PACKET_POOL
>                           -f CONFIG_FILE_PATH
>                           --config (port,queue,lcore)[,(port,queue,lcore)]
> @@ -176,6 +177,10 @@ Where:
>       Zero value disables cache.
>       Default value: 128.
>   
> +*   ``-t``: specifies the statistics screen update interval. If set to zero or
> +    omitted statistics screen is disabled.
> +    Default value: 0.
> +
>   *   ``-s``: sets number of mbufs in packet pool, if not provided number of mbufs
>       will be calculated based on number of cores, eth ports and crypto queues.
>   
> diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
> index 265fff4bef..60b25be872 100644
> --- a/examples/ipsec-secgw/ipsec-secgw.c
> +++ b/examples/ipsec-secgw/ipsec-secgw.c
> @@ -181,6 +181,7 @@ static uint32_t frag_tbl_sz;
>   static uint32_t frame_buf_size = RTE_MBUF_DEFAULT_BUF_SIZE;
>   static uint32_t mtu_size = RTE_ETHER_MTU;
>   static uint64_t frag_ttl_ns = MAX_FRAG_TTL_NS;
> +static uint32_t stats_interval;
>   
>   /* application wide librte_ipsec/SA parameters */
>   struct app_sa_prm app_sa_prm = {
> @@ -292,7 +293,6 @@ adjust_ipv6_pktlen(struct rte_mbuf *m, const struct rte_ipv6_hdr *iph,
>   	}
>   }
>   
> -#if (STATS_INTERVAL > 0)
>   
>   /* Print out statistics on packet distribution */
>   static void
> @@ -352,9 +352,8 @@ print_stats_cb(__rte_unused void *param)
>   		   total_packets_dropped);
>   	printf("\n====================================================\n");
>   
> -	rte_eal_alarm_set(STATS_INTERVAL * US_PER_S, print_stats_cb, NULL);
> +	rte_eal_alarm_set(stats_interval * US_PER_S, print_stats_cb, NULL);
>   }
> -#endif /* STATS_INTERVAL */
>   
>   static inline void
>   prepare_one_packet(struct rte_mbuf *pkt, struct ipsec_traffic *t)
> @@ -1435,6 +1434,7 @@ print_usage(const char *prgname)
>   		" [-e]"
>   		" [-a]"
>   		" [-c]"
> +		" [-t STATS_INTERVAL]"
>   		" [-s NUMBER_OF_MBUFS_IN_PKT_POOL]"
>   		" -f CONFIG_FILE"
>   		" --config (port,queue,lcore)[,(port,queue,lcore)]"
> @@ -1459,6 +1459,8 @@ print_usage(const char *prgname)
>   		"  -a enables SA SQN atomic behaviour\n"
>   		"  -c specifies inbound SAD cache size,\n"
>   		"     zero value disables the cache (default value: 128)\n"
> +		"  -t specifies statistics screen update interval,\n"
> +		"     zero disables statistics screen (default value: 0)\n"
>   		"  -s number of mbufs in packet pool, if not specified number\n"
>   		"     of mbufs will be calculated based on number of cores,\n"
>   		"     ports and crypto queues\n"
> @@ -1666,7 +1668,7 @@ parse_args(int32_t argc, char **argv, struct eh_conf *eh_conf)
>   
>   	argvopt = argv;
>   
> -	while ((opt = getopt_long(argc, argvopt, "aelp:Pu:f:j:w:c:s:",
> +	while ((opt = getopt_long(argc, argvopt, "aelp:Pu:f:j:w:c:t:s:",
>   				lgopts, &option_index)) != EOF) {
>   
>   		switch (opt) {
> @@ -1747,6 +1749,15 @@ parse_args(int32_t argc, char **argv, struct eh_conf *eh_conf)
>   			}
>   			app_sa_prm.cache_sz = ret;
>   			break;
> +		case 't':
> +			ret = parse_decimal(optarg);
> +			if (ret < 0) {
> +				printf("Invalid interval value: %s\n", optarg);
> +				print_usage(prgname);
> +				return -1;
> +			}
> +			stats_interval = ret;
> +			break;
>   		case CMD_LINE_OPT_CONFIG_NUM:
>   			ret = parse_config(optarg);
>   			if (ret) {
> @@ -3350,11 +3361,11 @@ main(int32_t argc, char **argv)
>   
>   	check_all_ports_link_status(enabled_port_mask);
>   
> -#if (STATS_INTERVAL > 0)
> -	rte_eal_alarm_set(STATS_INTERVAL * US_PER_S, print_stats_cb, NULL);
> -#else
> -	RTE_LOG(INFO, IPSEC, "Stats display disabled\n");
> -#endif /* STATS_INTERVAL */
> +	if (stats_interval > 0)
> +		rte_eal_alarm_set(stats_interval * US_PER_S,
> +				print_stats_cb, NULL);
> +	else
> +		RTE_LOG(INFO, IPSEC, "Stats display disabled\n");
>   
>   	/* launch per-lcore init on every lcore */
>   	rte_eal_mp_remote_launch(ipsec_launch_one_lcore, eh_conf, CALL_MAIN);
> diff --git a/examples/ipsec-secgw/ipsec-secgw.h b/examples/ipsec-secgw/ipsec-secgw.h
> index f3082a1037..de9f382742 100644
> --- a/examples/ipsec-secgw/ipsec-secgw.h
> +++ b/examples/ipsec-secgw/ipsec-secgw.h
> @@ -6,9 +6,6 @@
>   
>   #include <stdbool.h>
>   
> -#ifndef STATS_INTERVAL
> -#define STATS_INTERVAL 0
> -#endif
>   
>   #define NB_SOCKETS 4
>   
> @@ -144,38 +141,26 @@ is_unprotected_port(uint16_t port_id)
>   static inline void
>   core_stats_update_rx(int n)
>   {
> -#if (STATS_INTERVAL > 0)
>   	int lcore_id = rte_lcore_id();
>   	core_statistics[lcore_id].rx += n;
>   	core_statistics[lcore_id].rx_call++;
>   	if (n == MAX_PKT_BURST)
>   		core_statistics[lcore_id].burst_rx += n;
> -#else
> -	RTE_SET_USED(n);
> -#endif /* STATS_INTERVAL */
>   }
>   
>   static inline void
>   core_stats_update_tx(int n)
>   {
> -#if (STATS_INTERVAL > 0)
>   	int lcore_id = rte_lcore_id();
>   	core_statistics[lcore_id].tx += n;
>   	core_statistics[lcore_id].tx_call++;
> -#else
> -	RTE_SET_USED(n);
> -#endif /* STATS_INTERVAL */
>   }
>   
>   static inline void
>   core_stats_update_drop(int n)
>   {
> -#if (STATS_INTERVAL > 0)
>   	int lcore_id = rte_lcore_id();
>   	core_statistics[lcore_id].dropped += n;
> -#else
> -	RTE_SET_USED(n);
> -#endif /* STATS_INTERVAL */
>   }
>   
>   /* helper routine to free bulk of packets */
Acked-by: Hemant Agrawal <hemant.agrawal at nxp.com>


More information about the dev mailing list