[PATCH] crypto/scheduler: fix session retrieval for ops
Ciara Power
ciara.power at intel.com
Tue Nov 1 17:48:02 CET 2022
In cases where some ops failed to enqueue, the op session was never being
reset. This resulted in a segmentation fault when processing ops the
next time. To fix this, only set the op session after the failure
condition is checked.
Also, the incorrect ops index was being used for session retrieval when
dequeueing for the secondary worker.
Fixes: 6812b9bf470e ("crypto/scheduler: use unified session")
Reported-by: Kevin O'Sullivan <kevin.osullivan at intel.com>
Signed-off-by: Ciara Power <ciara.power at intel.com>
---
drivers/crypto/scheduler/scheduler_failover.c | 8 ++++-
.../scheduler/scheduler_pkt_size_distr.c | 30 +++++++++----------
2 files changed, 22 insertions(+), 16 deletions(-)
diff --git a/drivers/crypto/scheduler/scheduler_failover.c b/drivers/crypto/scheduler/scheduler_failover.c
index 7fadcf66d0..f24d2fc44b 100644
--- a/drivers/crypto/scheduler/scheduler_failover.c
+++ b/drivers/crypto/scheduler/scheduler_failover.c
@@ -50,12 +50,18 @@ schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
enqueued_ops = failover_worker_enqueue(&qp_ctx->primary_worker,
ops, nb_ops, PRIMARY_WORKER_IDX);
- if (enqueued_ops < nb_ops)
+ if (enqueued_ops < nb_ops) {
+ scheduler_retrieve_session(&ops[enqueued_ops],
+ nb_ops - enqueued_ops);
enqueued_ops += failover_worker_enqueue(
&qp_ctx->secondary_worker,
&ops[enqueued_ops],
nb_ops - enqueued_ops,
SECONDARY_WORKER_IDX);
+ if (enqueued_ops < nb_ops)
+ scheduler_retrieve_session(&ops[enqueued_ops],
+ nb_ops - enqueued_ops);
+ }
return enqueued_ops;
}
diff --git a/drivers/crypto/scheduler/scheduler_pkt_size_distr.c b/drivers/crypto/scheduler/scheduler_pkt_size_distr.c
index 41f05e6a47..0c51fff930 100644
--- a/drivers/crypto/scheduler/scheduler_pkt_size_distr.c
+++ b/drivers/crypto/scheduler/scheduler_pkt_size_distr.c
@@ -89,9 +89,6 @@ schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
ops[i]->sym->auth.data.length;
/* decide the target op based on the job length */
target[0] = !(job_len[0] & psd_qp_ctx->threshold);
- if (ops[i]->sess_type == RTE_CRYPTO_OP_WITH_SESSION)
- ops[i]->sym->session =
- sess_ctx[0]->worker_sess[target[0]];
p_enq_op = &enq_ops[target[0]];
/* stop schedule cops before the queue is full, this shall
@@ -103,6 +100,9 @@ schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
break;
}
+ if (ops[i]->sess_type == RTE_CRYPTO_OP_WITH_SESSION)
+ ops[i]->sym->session =
+ sess_ctx[0]->worker_sess[target[0]];
sched_ops[p_enq_op->worker_idx][p_enq_op->pos] = ops[i];
p_enq_op->pos++;
@@ -110,9 +110,6 @@ schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
job_len[1] += (ops[i + 1]->sym->cipher.data.length == 0) *
ops[i+1]->sym->auth.data.length;
target[1] = !(job_len[1] & psd_qp_ctx->threshold);
- if (ops[i + 1]->sess_type == RTE_CRYPTO_OP_WITH_SESSION)
- ops[i + 1]->sym->session =
- sess_ctx[1]->worker_sess[target[1]];
p_enq_op = &enq_ops[target[1]];
if (p_enq_op->pos + in_flight_ops[p_enq_op->worker_idx] ==
@@ -121,6 +118,9 @@ schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
break;
}
+ if (ops[i + 1]->sess_type == RTE_CRYPTO_OP_WITH_SESSION)
+ ops[i + 1]->sym->session =
+ sess_ctx[1]->worker_sess[target[1]];
sched_ops[p_enq_op->worker_idx][p_enq_op->pos] = ops[i+1];
p_enq_op->pos++;
@@ -128,9 +128,6 @@ schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
job_len[2] += (ops[i + 2]->sym->cipher.data.length == 0) *
ops[i + 2]->sym->auth.data.length;
target[2] = !(job_len[2] & psd_qp_ctx->threshold);
- if (ops[i + 2]->sess_type == RTE_CRYPTO_OP_WITH_SESSION)
- ops[i + 2]->sym->session =
- sess_ctx[2]->worker_sess[target[2]];
p_enq_op = &enq_ops[target[2]];
if (p_enq_op->pos + in_flight_ops[p_enq_op->worker_idx] ==
@@ -139,6 +136,9 @@ schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
break;
}
+ if (ops[i + 2]->sess_type == RTE_CRYPTO_OP_WITH_SESSION)
+ ops[i + 2]->sym->session =
+ sess_ctx[2]->worker_sess[target[2]];
sched_ops[p_enq_op->worker_idx][p_enq_op->pos] = ops[i+2];
p_enq_op->pos++;
@@ -146,9 +146,6 @@ schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
job_len[3] += (ops[i + 3]->sym->cipher.data.length == 0) *
ops[i + 3]->sym->auth.data.length;
target[3] = !(job_len[3] & psd_qp_ctx->threshold);
- if (ops[i + 3]->sess_type == RTE_CRYPTO_OP_WITH_SESSION)
- ops[i + 3]->sym->session =
- sess_ctx[3]->worker_sess[target[3]];
p_enq_op = &enq_ops[target[3]];
if (p_enq_op->pos + in_flight_ops[p_enq_op->worker_idx] ==
@@ -157,6 +154,9 @@ schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
break;
}
+ if (ops[i + 3]->sess_type == RTE_CRYPTO_OP_WITH_SESSION)
+ ops[i + 3]->sym->session =
+ sess_ctx[3]->worker_sess[target[3]];
sched_ops[p_enq_op->worker_idx][p_enq_op->pos] = ops[i+3];
p_enq_op->pos++;
}
@@ -171,8 +171,6 @@ schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
job_len += (ops[i]->sym->cipher.data.length == 0) *
ops[i]->sym->auth.data.length;
target = !(job_len & psd_qp_ctx->threshold);
- if (ops[i]->sess_type == RTE_CRYPTO_OP_WITH_SESSION)
- ops[i]->sym->session = sess_ctx->worker_sess[target];
p_enq_op = &enq_ops[target];
if (p_enq_op->pos + in_flight_ops[p_enq_op->worker_idx] ==
@@ -181,6 +179,8 @@ schedule_enqueue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
break;
}
+ if (ops[i]->sess_type == RTE_CRYPTO_OP_WITH_SESSION)
+ ops[i]->sym->session = sess_ctx->worker_sess[target];
sched_ops[p_enq_op->worker_idx][p_enq_op->pos] = ops[i];
p_enq_op->pos++;
}
@@ -251,7 +251,7 @@ schedule_dequeue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
nb_deq_ops_sec = rte_cryptodev_dequeue_burst(worker->dev_id,
worker->qp_id, &ops[nb_deq_ops_pri],
nb_ops - nb_deq_ops_pri);
- scheduler_retrieve_session(ops, nb_deq_ops_sec);
+ scheduler_retrieve_session(&ops[nb_deq_ops_pri], nb_deq_ops_sec);
worker->nb_inflight_cops -= nb_deq_ops_sec;
if (!worker->nb_inflight_cops)
--
2.25.1
More information about the dev
mailing list