[PATCH v3 1/1] app/testpmd: add valid check to verify multi mempool feature

[Han, YingyaX]

There is a new issue after applying the patch.
Failed to configure buffer_split for a single queue and port can't up.
The test steps and logs are as follows:
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-9 -n 4  -a 31:00.0 --force-max-simd-bitwidth=64 -- -i --mbuf-size=2048,2048 --txq=4 --rxq=4
testpmd> port stop all
testpmd> port 0 rxq 2 rx_offload buffer_split on
testpmd> show port 0 rx_offload configuration
Rx Offloading Configuration of port 0 :
  Port : RSS_HASH
  Queue[ 0] : RSS_HASH
  Queue[ 1] : RSS_HASH
  Queue[ 2] : RSS_HASH BUFFER_SPLIT
  Queue[ 3] : RSS_HASH
testpmd> set rxhdrs eth
testpmd> port start all
Configuring Port 0 (socket 0)
No Rx segmentation offload configured
Fail to configure port 0 rx queues

BRs,
Yingya

-----Original Message-----
From: Ferruh Yigit <ferruh.yigit at amd.com> 
Sent: Friday, November 18, 2022 7:37 AM
To: Hanumanth Pothula <hpothula at marvell.com>; Singh, Aman Deep <aman.deep.singh at intel.com>; Zhang, Yuying <yuying.zhang at intel.com>; Han, YingyaX <yingyax.han at intel.com>; Jiang, YuX <yux.jiang at intel.com>
Cc: dev at dpdk.org; andrew.rybchenko at oktetlabs.ru; thomas at monjalon.net; jerinj at marvell.com; ndabilpuram at marvell.com
Subject: Re: [PATCH v3 1/1] app/testpmd: add valid check to verify multi mempool feature

On 11/17/2022 4:03 PM, Hanumanth Pothula wrote:
> Validate ethdev parameter 'max_rx_mempools' to know whether device 
> supports multi-mempool feature or not.
> 
> Bugzilla ID: 1128
> 
> Signed-off-by: Hanumanth Pothula <hpothula at marvell.com>
> v3:
>  - Simplified conditional check.
>  - Corrected spell, whether.
> v2:
>  - Rebased on tip of next-net/main.
> ---
>  app/test-pmd/testpmd.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index 
> 4e25f77c6a..6c3d0948ec 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -2655,16 +2655,22 @@ rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
>  	union rte_eth_rxseg rx_useg[MAX_SEGS_BUFFER_SPLIT] = {};
>  	struct rte_mempool *rx_mempool[MAX_MEMPOOL] = {};
>  	struct rte_mempool *mpx;
> +	struct rte_eth_dev_info dev_info;
>  	unsigned int i, mp_n;
>  	uint32_t prev_hdrs = 0;
>  	int ret;
>  
> +	ret = rte_eth_dev_info_get(port_id, &dev_info);
> +	if (ret != 0)
> +		return ret;
> +
>  	/* Verify Rx queue configuration is single pool and segment or
>  	 * multiple pool/segment.
> +	 * @see rte_eth_dev_info::max_rx_mempools
>  	 * @see rte_eth_rxconf::rx_mempools
>  	 * @see rte_eth_rxconf::rx_seg
>  	 */
> -	if (!(mbuf_data_size_n > 1) && !(rx_pkt_nb_segs > 1 ||
> +	if ((dev_info.max_rx_mempools == 0) && !(rx_pkt_nb_segs > 1 ||
>  	    ((rx_conf->offloads & RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT) != 0))) {
>  		/* Single pool/segment configuration */
>  		rx_conf->rx_seg = NULL;


Hi Yingya, Yu,

Can you please verify this patch?

Thanks,
ferruh