[PATCH v7 2/2] ethdev: add quota flow action and item

Andrew Rybchenko andrew.rybchenko at oktetlabs.ru
Wed Feb 1 12:22:24 CET 2023


On 1/24/23 12:37, Gregory Etelson wrote:
> Quota action limits traffic according to pre-defined configuration.
> Quota reflects overall traffic usage regardless bandwidth.
> Quota flow action initialized with signed tokens number value.
> Quota flow action updates tokens number according to
> these rules:
> 1. if quota was configured to count packet length, for each packet
>     of size S, tokens number reduced by S.
> 2. If quota was configured to count packets, each packet decrements
>     tokens number.
> quota action sets packet metadata according to a number of remaining
> tokens number:
>    PASS - remaining tokens number is non-negative.
>    BLOCK - remaining tokens number is negative.
> 
> Quota flow item matches on that data
> 
> Application updates tokens number in quota flow action
> with SET or ADD calls:
>   SET(QUOTA, val) - arm quota with new tokens number set to val
>   ADD(QUOTA, val) - increase existing quota tokens number by val
> 
> Both SET and ADD return to application number of tokens stored in port
> before update.
> 
> If quota state was BLOCK (negative action tokens number)
> application can change it to PASS after providing enough tokens to
> raise action tokens number to 0 or above.
> 
> Application must create a rule with quota action to mark flow and
> match on the mark with quota item in following flow rule.
> 
> Signed-off-by: Gregory Etelson <getelson at nvidia.com>
> Acked-by: Ori Kam <orika at nvidia.com>

[snip]

> diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
> index 3e6242803d..7a3868638c 100644
> --- a/doc/guides/prog_guide/rte_flow.rst
> +++ b/doc/guides/prog_guide/rte_flow.rst
> @@ -1544,6 +1544,13 @@ Matches Color Marker set by a Meter.
>   
>   - ``color``: Metering color marker.
>   
> +Item: ``QUOTA``
> +^^^^^^^^^^^^^^^
> +
> +Matches flow quota state set by quota action.
> +
> +- ``state``: Flow quota state
> +
>   Actions
>   ~~~~~~~
>   
> @@ -3227,6 +3234,40 @@ and rte_mtr_policy_get() API respectively.
>      | ``policy``       | Meter policy object  |
>      +------------------+----------------------+
>   
> +Action: ``QUOTA``
> +^^^^^^^^^^^^^^^^^
> +
> +Update ``quota`` value and set packet quota state.
> +If the ``quota`` value after update is non-negative packet quota state set to
> +``RTE_FLOW_QUOTA_STATE_PASS``. Otherwise, packet quota state set to ``RTE_FLOW_QUOTA_STATE_BLOCK``.
> +The ``quota`` value is reduced according to ``mode`` setting.
> +
> +.. _table_rte_flow_action_quota:
> +
> +.. table:: QUOTA
> +
> +   +------------------+------------------------+
> +   | Field            | Value                  |
> +   +==================+========================+
> +   | ``mode``         | Quota operational mode |
> +   +------------------+------------------------+
> +   | ``quota``        | Quota value            |
> +   +------------------+------------------------+
> +
> +.. _rte_flow_quota_mode:
> +
> +.. table:: Quota update modes
> +
> +   +---------------------------------+-------------------------------------+
> +   | Value                           | Description                         |
> +   +=================================+=====================================+
> +   | ``RTE_FLOW_QUOTA_MODE_PACKET``  | Count packets                       |
> +   +---------------------------------+-------------------------------------+
> +   | ``RTE_FLOW_QUOTA_MODE_L2``      | Count packet bytes starting from L2 |
> +   +------------------+----------------------------------------------------+
> +   | ``RTE_FLOW_QUOTA_MODE_L3``      | Count packet bytes starting from L3 |
> +   +------------------+----------------------------------------------------+
> +
>   Negative types
>   ~~~~~~~~~~~~~~
>   
> diff --git a/doc/guides/rel_notes/release_23_03.rst b/doc/guides/rel_notes/release_23_03.rst
> index 5b98e18032..0756cca241 100644
> --- a/doc/guides/rel_notes/release_23_03.rst
> +++ b/doc/guides/rel_notes/release_23_03.rst
> @@ -77,6 +77,18 @@ New Features
>     - ``rte_flow_async_action_handle_query_update``
>   
>   

Just one empty line between section items

> +* **Added quota flow action and quota flow item.**
> +
> +  - ``RTE_FLOW_ACTION_TYPE_QUOTA``
> +  - ``RTE_FLOW_ITEM_TYPE_QUOTA``
> +
> +
Just one empty line between section items

> +* **Updated testpmd to support quota flow action and item.**
> +
> +  Added support for flow quota action and item.
> +
> +
> +

It should be 2 empty lines, not 3,

>   Removed Items
>   -------------
>   

[snip]

> diff --git a/lib/ethdev/rte_flow.h b/lib/ethdev/rte_flow.h
> index 6705cb32af..46409ed607 100644
> --- a/lib/ethdev/rte_flow.h
> +++ b/lib/ethdev/rte_flow.h
> @@ -624,7 +624,45 @@ enum rte_flow_item_type {
>   	 * See struct rte_flow_item_meter_color.
>   	 */
>   	RTE_FLOW_ITEM_TYPE_METER_COLOR,
> +
> +	/**
> +	 * Match Quota state
> +	 *
> +	 * @see struct rte_flow_item_quota
> +	 */
> +	 RTE_FLOW_ITEM_TYPE_QUOTA,
> +};
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * QUOTA state.
> + *
> + * @see struct rte_flow_item_quota
> + */
> +enum rte_flow_quota_state {
> +	RTE_FLOW_QUOTA_STATE_PASS, /**< PASS quota state */
> +	RTE_FLOW_QUOTA_STATE_BLOCK /**< BLOCK quota state */
> +};
> +
> +/**
> + * RTE_FLOW_ITEM_TYPE_QUOTA
> + *
> + * Matches QUOTA state
> + */
> +struct rte_flow_item_quota {
> +	enum rte_flow_quota_state state;
> +};
> +
> +/**
> + * Default mask for RTE_FLOW_ITEM_TYPE_QUOTA
> + */
> +#ifndef __cplusplus
> +static const struct rte_flow_item_quota rte_flow_item_quota_mask = {
> +	.state = (enum rte_flow_quota_state)0xff
>   };
> +#endif
>   
>   /**
>    *
> @@ -2736,6 +2774,81 @@ enum rte_flow_action_type {
>   	 * No associated configuration structure.
>   	 */
>   	RTE_FLOW_ACTION_TYPE_SEND_TO_KERNEL,
> +
> +	/**
> +	 * Apply the quota verdict (PASS or BLOCK) to a flow.
> +	 *
> +	 * @see struct rte_flow_action_quota
> +	 * @see struct rte_flow_query_quota
> +	 * @see struct rte_flow_update_quota
> +	 */
> +	 RTE_FLOW_ACTION_TYPE_QUOTA,
> +};
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * QUOTA operational mode.
> + *
> + * @see struct rte_flow_action_quota
> + */
> +enum rte_flow_quota_mode {
> +	RTE_FLOW_QUOTA_MODE_PACKET = 1, /** Count packets */

/**<  since you put documentation after documented member

> +	RTE_FLOW_QUOTA_MODE_L2 = 2, /** Count packet bytes starting from L2 */

/**<

also, why do you initialize every member? are you going to rely
on these values?

> +	RTE_FLOW_QUOTA_MODE_L3 = 3, /** Count packet bytes starting from L3 */

/**<

> +};
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Create QUOTA action.
> + *
> + * @see RTE_FLOW_ACTION_TYPE_QUOTA
> + */
> +struct rte_flow_action_quota {
> +	enum rte_flow_quota_mode mode; /** quota operational mode */

/**<  since you put documentation after documented member

> +	int64_t quota;                 /** quota value */

/**<

> +};
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Query indirect QUOTA action.
> + *
> + * @see RTE_FLOW_ACTION_TYPE_QUOTA
> + *
> + */
> +struct rte_flow_query_quota {
> +	int64_t quota; /** quota value */

/**<  since you put documentation after documented member

> +};
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Indirect QUOTA update operations.
> + *
> + * @see struct rte_flow_update_quota
> + */
> +enum rte_flow_update_quota_op {
> +	RTE_FLOW_UPDATE_QUOTA_SET, /** set new quota value */

/**<  since you put documentation after documented member

> +	RTE_FLOW_UPDATE_QUOTA_ADD, /** increase existing quota with new value */

/**<

> +};
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * @see RTE_FLOW_ACTION_TYPE_QUOTA
> + *
> + * Update indirect QUOTA action.
> + */
> +struct rte_flow_update_quota {
> +	enum rte_flow_update_quota_op op; /** update operation */

/**<  since you put documentation after documented member

> +	int64_t quota;                    /** quota value */

/**<

>   };
>   
>   /**
> @@ -4854,6 +4967,11 @@ struct rte_flow_port_info {
>   	 * @see RTE_FLOW_ACTION_TYPE_CONNTRACK
>   	 */
>   	uint32_t max_nb_conn_tracks;
> +	/**
> +	 * Maximum number of quota actions.
> +	 * @see RTE_FLOW_ACTION_TYPE_QUOTA
> +	 */
> +	uint32_t max_nb_quotas;
>   	/**
>   	 * Port supported flags (RTE_FLOW_PORT_FLAG_*).
>   	 */
> @@ -4932,6 +5050,11 @@ struct rte_flow_port_attr {
>   	 * @see RTE_FLOW_ACTION_TYPE_CONNTRACK
>   	 */
>   	uint32_t nb_conn_tracks;
> +	/**
> +	 * Maximum number of quota actions.
> +	 * @see RTE_FLOW_ACTION_TYPE_QUOTA
> +	 */
> +	uint32_t nb_quotas;
>   	/**
>   	 * Port flags (RTE_FLOW_PORT_FLAG_*).
>   	 */



More information about the dev mailing list