[PATCH v7 00/21] add support for cpfl PMD in DPDK
Ferruh Yigit
ferruh.yigit at amd.com
Mon Feb 27 22:43:56 CET 2023
On 2/16/2023 12:29 AM, Mingxia Liu wrote:
> The patchset introduced the cpfl (Control Plane Function Library) PMD
> for Intel® IPU E2100’s Configure Physical Function (Device ID: 0x1453)
>
> The cpfl PMD inherits all the features from idpf PMD which will follow
> an ongoing standard data plan function spec
> https://www.oasis-open.org/committees/tc_home.php?wg_abbrev=idpf
> Besides, it will also support more device specific hardware offloading
> features from DPDK’s control path (e.g.: hairpin, rte_flow …). which is
> different from idpf PMD, and that's why we need a new cpfl PMD.
>
Hi Mingxia, Beilei, Yuying,
Do you know if is there any effort to make device specific offloads part
of IDPF spec?
Overall, working on a standard interface and upstreaming driver for it
(idpf) but next product is diverging from the standard and requiring a
dedicated driver, do you know if 'cpfl' is a temporary solution while
standard gets required update or is it a long term difference between
standard?
> This patchset mainly focuses on idpf PMD’s equivalent features.
> To avoid duplicated code, the patchset depends on below patchsets which
> move the common part from net/idpf into common/idpf as a shared library.
>
> v2 changes:
> - rebase to the new baseline.
> - Fix rss lut config issue.
> v3 changes:
> - rebase to the new baseline.
> v4 changes:
> - Resend v3. No code changed.
> v5 changes:
> - rebase to the new baseline.
> - optimize some code
> - give "not supported" tips when user want to config rss hash type
> - if stats reset fails at initialization time, don't rollback, just
> print ERROR info
> v6 changes:
> - for small fixed size structure, change rte_memcpy to memcpy()
> - fix compilation for AVX512DQ
> - update cpfl maintainers
> v7 changes:
> - add dependency in cover-letter
>
> This patchset is based on the idpf PMD code:
> http://patches.dpdk.org/project/dpdk/cover/20230206054618.40975-1-beilei.xing@intel.com/
> http://patches.dpdk.org/project/dpdk/cover/20230106090501.9106-1-beilei.xing@intel.com/
> http://patches.dpdk.org/project/dpdk/cover/20230207084549.2225214-1-wenjun1.wu@intel.com/
> http://patches.dpdk.org/project/dpdk/cover/20230208073401.2468579-1-mingxia.liu@intel.com/
>
>
> Mingxia Liu (21):
> net/cpfl: support device initialization
> net/cpfl: add Tx queue setup
> net/cpfl: add Rx queue setup
> net/cpfl: support device start and stop
> net/cpfl: support queue start
> net/cpfl: support queue stop
> net/cpfl: support queue release
> net/cpfl: support MTU configuration
> net/cpfl: support basic Rx data path
> net/cpfl: support basic Tx data path
> net/cpfl: support write back based on ITR expire
> net/cpfl: support RSS
> net/cpfl: support Rx offloading
> net/cpfl: support Tx offloading
> net/cpfl: add AVX512 data path for single queue model
> net/cpfl: support timestamp offload
> net/cpfl: add AVX512 data path for split queue model
> net/cpfl: add HW statistics
> net/cpfl: add RSS set/get ops
> net/cpfl: support scalar scatter Rx datapath for single queue model
> net/cpfl: add xstats ops
>
> MAINTAINERS | 8 +
> doc/guides/nics/cpfl.rst | 88 ++
> doc/guides/nics/features/cpfl.ini | 17 +
> doc/guides/rel_notes/release_23_03.rst | 6 +
> drivers/net/cpfl/cpfl_ethdev.c | 1453 +++++++++++++++++++++++
> drivers/net/cpfl/cpfl_ethdev.h | 95 ++
> drivers/net/cpfl/cpfl_logs.h | 32 +
> drivers/net/cpfl/cpfl_rxtx.c | 952 +++++++++++++++
> drivers/net/cpfl/cpfl_rxtx.h | 44 +
> drivers/net/cpfl/cpfl_rxtx_vec_common.h | 116 ++
> drivers/net/cpfl/meson.build | 40 +
> drivers/net/meson.build | 1 +
> 12 files changed, 2852 insertions(+)
> create mode 100644 doc/guides/nics/cpfl.rst
> create mode 100644 doc/guides/nics/features/cpfl.ini
> create mode 100644 drivers/net/cpfl/cpfl_ethdev.c
> create mode 100644 drivers/net/cpfl/cpfl_ethdev.h
> create mode 100644 drivers/net/cpfl/cpfl_logs.h
> create mode 100644 drivers/net/cpfl/cpfl_rxtx.c
> create mode 100644 drivers/net/cpfl/cpfl_rxtx.h
> create mode 100644 drivers/net/cpfl/cpfl_rxtx_vec_common.h
> create mode 100644 drivers/net/cpfl/meson.build
>
More information about the dev
mailing list