[PATCH V4 4/5] app/testpmd: add attach and detach port for multiple process

Ferruh Yigit ferruh.yigit at amd.com
Wed Jan 11 13:51:54 CET 2023


On 12/6/2022 9:26 AM, Huisong Li wrote:
> This patch supports attach and detach port in primary and secondary
> process.
> 

Hi Huisong,

This patch moves port setup and remove (via alarm callback) to event
callback,

1) I can see it is for MP but can you please give more details, what was
the problem before, how this solves the issue

2) I am concerned about doing more work on the event callback and
observe some unexpected side effects later, can't we handle this out of
event callback


> Signed-off-by: Huisong Li <lihuisong at huawei.com>
> Signed-off-by: Dongdong Liu <liudongdong3 at huawei.com>
> ---
>  app/test-pmd/testpmd.c                | 38 ++++++++++++++++-----------
>  app/test-pmd/testpmd.h                |  1 -
>  drivers/net/bonding/bonding_testpmd.c |  1 -
>  3 files changed, 22 insertions(+), 18 deletions(-)
> 
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> index bc25703490..2e6329c853 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -3463,15 +3463,12 @@ attach_port(char *identifier)
>  		return;
>  	}
>  
> -	/* first attach mode: event */
> -	if (setup_on_probe_event) {
> -		/* new ports are detected on RTE_ETH_EVENT_NEW event */
> -		for (pi = 0; pi < RTE_MAX_ETHPORTS; pi++)
> -			if (ports[pi].port_status == RTE_PORT_HANDLING &&
> -					ports[pi].need_setup != 0)
> -				setup_attached_port(pi);
> +	/*
> +	 * first attach mode: event, setting up attached port is done in
> +	 * probing callback.
> +	 */
> +	if (setup_on_probe_event)
>  		return;
> -	}
>  
>  	/* second attach mode: iterator */
>  	RTE_ETH_FOREACH_MATCHING_DEV(pi, identifier, &iterator) {
> @@ -3502,7 +3499,6 @@ setup_attached_port(portid_t pi)
>  	ports_ids[nb_ports++] = pi;
>  	fwd_ports_ids[nb_fwd_ports++] = pi;
>  	nb_cfg_ports = nb_fwd_ports;
> -	ports[pi].need_setup = 0;
>  	ports[pi].port_status = RTE_PORT_STOPPED;
>  
>  	printf("Port %d is attached. Now total ports is %d\n", pi, nb_ports);
> @@ -3536,10 +3532,8 @@ detach_device(struct rte_device *dev)
>  		TESTPMD_LOG(ERR, "Failed to detach device %s\n", rte_dev_name(dev));
>  		return;
>  	}
> -	remove_invalid_ports();
>  
>  	printf("Device is detached\n");
> -	printf("Now total ports is %d\n", nb_ports);
>  	printf("Done\n");
>  	return;
>  }
> @@ -3606,11 +3600,9 @@ detach_devargs(char *identifier)
>  		return;
>  	}
>  
> -	remove_invalid_ports();
> -
>  	printf("Device %s is detached\n", identifier);
> -	printf("Now total ports is %d\n", nb_ports);
>  	printf("Done\n");
> +
>  	rte_devargs_reset(&da);
>  }
>  
> @@ -3774,11 +3766,22 @@ rmv_port_callback(void *arg)
>  		struct rte_device *device = dev_info.device;
>  		close_port(port_id);
>  		detach_device(device); /* might be already removed or have more ports */
> +		remove_invalid_ports();
> +		printf("Now total ports is %d\n", nb_ports);
>  	}
>  	if (need_to_start)
>  		start_packet_forwarding(0);
>  }
>  
> +static void
> +remove_invalid_ports_callback(void *arg)
> +{
> +	RTE_SET_USED(arg);
> +
> +	remove_invalid_ports();
> +	printf("Now total ports is %d\n", nb_ports);
> +}
> +
>  /* This function is used by the interrupt thread */
>  static int
>  eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
> @@ -3803,8 +3806,8 @@ eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
>  
>  	switch (type) {
>  	case RTE_ETH_EVENT_NEW:
> -		ports[port_id].need_setup = 1;
> -		ports[port_id].port_status = RTE_PORT_HANDLING;
> +		if (setup_on_probe_event)
> +			setup_attached_port(port_id);
>  		break;
>  	case RTE_ETH_EVENT_INTR_RMV:
>  		if (rte_eal_alarm_set(100000,
> @@ -3815,6 +3818,9 @@ eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
>  	case RTE_ETH_EVENT_DESTROY:
>  		ports[port_id].port_status = RTE_PORT_CLOSED;
>  		printf("Port %u is closed\n", port_id);
> +		if (rte_eal_alarm_set(100000, remove_invalid_ports_callback,
> +			(void *)(intptr_t)port_id))
> +			fprintf(stderr, "Could not set up deferred device released\n");
>  		break;
>  	case RTE_ETH_EVENT_RX_AVAIL_THRESH: {
>  		uint16_t rxq_id;
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index 7d24d25970..080d3a1139 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -306,7 +306,6 @@ struct rte_port {
>  	uint16_t                tx_vlan_id;/**< The tag ID */
>  	uint16_t                tx_vlan_id_outer;/**< The outer tag ID */
>  	volatile uint16_t        port_status;    /**< port started or not */
> -	uint8_t                 need_setup;     /**< port just attached */
>  	uint8_t                 need_reconfig;  /**< need reconfiguring port or not */
>  	uint8_t                 need_reconfig_queues; /**< need reconfiguring queues or not */
>  	uint8_t                 rss_flag;   /**< enable rss or not */
> diff --git a/drivers/net/bonding/bonding_testpmd.c b/drivers/net/bonding/bonding_testpmd.c
> index 9529e16fb6..9216271314 100644
> --- a/drivers/net/bonding/bonding_testpmd.c
> +++ b/drivers/net/bonding/bonding_testpmd.c
> @@ -765,7 +765,6 @@ static void cmd_create_bonded_device_parsed(void *parsed_result,
>  
>  	ports[port_id].update_conf = 1;
>  	ports[port_id].bond_flag = 1;
> -	ports[port_id].need_setup = 0;
>  	ports[port_id].port_status = RTE_PORT_STOPPED;
>  }
>  



More information about the dev mailing list