[PATCH 2/2] app/testpmd: add disable-flow-flush parameter
Ori Kam
orika at nvidia.com
Thu Jan 26 13:29:14 CET 2023
Hi,
> -----Original Message-----
> From: Ferruh Yigit <ferruh.yigit at amd.com>
> Sent: Wednesday, 25 January 2023 20:38
>
> On 12/15/2022 1:41 AM, Chengwen Feng wrote:
> > This patch adds "--disable-flow-flush" parameter, which could used to
> > disable port flow flush when stop port. It allows testing keep flow
> > rules or shared flow objects across restart.
> >
> > Signed-off-by: Chengwen Feng <fengchengwen at huawei.com>
>
> +cc Ori
>
> I am for proceeding with this patch unless there is objection from Aman
> & Ori.
>
> > ---
> > app/test-pmd/parameters.c | 4 ++++
> > app/test-pmd/testpmd.c | 7 ++++++-
> > app/test-pmd/testpmd.h | 1 +
> > doc/guides/testpmd_app_ug/run_app.rst | 5 +++++
> > 4 files changed, 16 insertions(+), 1 deletion(-)
> >
> > diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
> > index d597c209ba..e734ad9a02 100644
> > --- a/app/test-pmd/parameters.c
> > +++ b/app/test-pmd/parameters.c
> > @@ -175,6 +175,7 @@ usage(char* progname)
> > "disable print of designated event or all of them.\n");
> > printf(" --flow-isolate-all: "
> > "requests flow API isolated mode on all ports at initialization
> time.\n");
> > + printf(" --disable-flow-flush: disable port flow flush when stop
> port.\n");
> > printf(" --tx-offloads=0xXXXXXXXX: hexadecimal bitmask of TX
> queue offloads\n");
> > printf(" --rx-offloads=0xXXXXXXXX: hexadecimal bitmask of RX
> queue offloads\n");
> > printf(" --hot-plug: enable hot plug for device.\n");
> > @@ -667,6 +668,7 @@ launch_args_parse(int argc, char** argv)
> > { "rxfreet", 1, 0, 0 },
> > { "no-flush-rx", 0, 0, 0 },
> > { "flow-isolate-all", 0, 0, 0 },
> > + { "disable-flow-flush", 0, 0, 0 },
> > { "rxoffs", 1, 0, 0 },
> > { "rxpkts", 1, 0, 0 },
> > { "rxhdrs", 1, 0, 0 },
> > @@ -1330,6 +1332,8 @@ launch_args_parse(int argc, char** argv)
> > rmv_interrupt = 0;
> > if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
> > flow_isolate_all = 1;
> > + if (!strcmp(lgopts[opt_idx].name, "disable-flow-
> flush"))
> > + no_flow_flush = 1;
> > if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
> > char *end = NULL;
> > n = strtoull(optarg, &end, 16);
> > diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> > index 134d79a555..ea78f8982d 100644
> > --- a/app/test-pmd/testpmd.c
> > +++ b/app/test-pmd/testpmd.c
> > @@ -383,6 +383,11 @@ uint8_t no_flush_rx = 0; /* flush by default */
> > */
> > uint8_t flow_isolate_all;
> >
> > +/*
> > + * Disable port flow flush when stop port.
> > + */
> > +uint8_t no_flow_flush = 0; /* do flow flush by default */
> > +
> > /*
> > * Avoids to check link status when starting/stopping a port.
> > */
> > @@ -3246,7 +3251,7 @@ stop_port(portid_t pid)
> > }
> > }
> >
> > - if (port->flow_list)
> > + if (port->flow_list && !no_flow_flush)
> > port_flow_flush(pi);
> >
> > ret = eth_dev_stop_mp(pi);
> > diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> > index 7d24d25970..ab4733522d 100644
> > --- a/app/test-pmd/testpmd.h
> > +++ b/app/test-pmd/testpmd.h
> > @@ -476,6 +476,7 @@ extern uint8_t numa_support; /**< set by "--
> numa" parameter */
> > extern uint16_t port_topology; /**< set by "--port-topology" parameter
> */
> > extern uint8_t no_flush_rx; /**<set by "--no-flush-rx" parameter */
> > extern uint8_t flow_isolate_all; /**< set by "--flow-isolate-all */
> > +extern uint8_t no_flow_flush; /**< set by "--disable-flow-flush"
> parameter */
> > extern uint8_t mp_alloc_type;
> > /**< set by "--mp-anon" or "--mp-alloc" parameter */
> > extern uint32_t eth_link_speed;
> > diff --git a/doc/guides/testpmd_app_ug/run_app.rst
> b/doc/guides/testpmd_app_ug/run_app.rst
> > index 074f910fc9..3ec3d4f5e6 100644
> > --- a/doc/guides/testpmd_app_ug/run_app.rst
> > +++ b/doc/guides/testpmd_app_ug/run_app.rst
> > @@ -436,6 +436,11 @@ The command line options are:
> >
> > Ports that do not support this mode are automatically discarded.
> >
> > +* ``--disable-flow-flush``
> > +
> > + Disable port flow flush when stop port. This allows testing keep flow
> rules
> > + or shared flow objects across restart.
> > +
> > * ``--tx-offloads=0xXXXXXXXX``
> >
> > Set the hexadecimal bitmask of TX queue offloads.
Acked-by: Ori Kam <orika at nvidia.com>
Best,
Ori
More information about the dev
mailing list