[PATCH v2] app/test-crypto-perf: add throughput OOP decryption

[Akhil Goyal]

> Hi Brian,
> 
> Since Ciara is no longer available and you are the new maintainer, can you
> investigate this patch?
> There were some concerns which Ciara highlighted. Can you check?
> 

Any update on this patch?


> > > Subject: [PATCH v2] app/test-crypto-perf: add throughput OOP decryption
> > >
> > > During throughput running, re-filling the test data will impact the performance
> > > test result. So for now, to run decrypt throughput testing is not supported
> since
> > > the test data is not filled.
> > >
> > > But if user requires OOP(out-of-place) mode, the test data from source mbuf
> > will
> > > never be modified, and if the test data can be prepared out of the running
> loop,
> > > the decryption test should be fine.
> > >
> > > This commit adds the support of out-of-place decryption testing for
> throughput.
> > >
> > > [1]:
> > > https://urldefense.proofpoint.com/v2/url?u=http-
> > 3A__mails.dpdk.org_archives_dev_2023-
> >
> 2DJuly_273328.html&d=DwIFAg&c=nKjWec2b6R0mOyPaz7xtfQ&r=DnL7Si2wl_P
> > RwpZ9TWey3eu68gBzn7DkPwuqhd6WNyo&m=eTj0O7iYH-
> > xiTQ6dNUZpsOXPqnyC1O_-
> > _IKt0j_yQ_N__vy0wIBLb_QyMQtodUrr&s=eDz_NLjqkUH2cYMilKEtdWImOPj5f-
> > CVKV5UW8P9frk&e=
> > >
> > > Signed-off-by: Suanming Mou <suanmingm at nvidia.com>
> > > ---
> > >  app/test-crypto-perf/cperf_ops.c             |  5 ++-
> > >  app/test-crypto-perf/cperf_options_parsing.c |  8 +++++  app/test-crypto-
> > > perf/cperf_test_throughput.c | 34 +++++++++++++++++---
> > >  3 files changed, 41 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/app/test-crypto-perf/cperf_ops.c b/app/test-crypto-
> > perf/cperf_ops.c
> > > index d3fd115bc0..714616c697 100644
> > > --- a/app/test-crypto-perf/cperf_ops.c
> > > +++ b/app/test-crypto-perf/cperf_ops.c
> > > @@ -644,7 +644,10 @@ cperf_set_ops_aead(struct rte_crypto_op **ops,
> > >  	}
> > >
> > >  	if ((options->test == CPERF_TEST_TYPE_VERIFY) ||
> > > -			(options->test == CPERF_TEST_TYPE_LATENCY)) {
> > > +	    (options->test == CPERF_TEST_TYPE_LATENCY) ||
> > > +	    (options->test == CPERF_TEST_TYPE_THROUGHPUT &&
> > > +	     (options->aead_op == RTE_CRYPTO_AEAD_OP_DECRYPT ||
> > > +	      options->cipher_op == RTE_CRYPTO_CIPHER_OP_DECRYPT))) {
> > >  		for (i = 0; i < nb_ops; i++) {
> > >  			uint8_t *iv_ptr = rte_crypto_op_ctod_offset(ops[i],
> > >  					uint8_t *, iv_offset);
> > > diff --git a/app/test-crypto-perf/cperf_options_parsing.c b/app/test-crypto-
> > > perf/cperf_options_parsing.c
> > > index 8c20974273..90526e676f 100644
> > > --- a/app/test-crypto-perf/cperf_options_parsing.c
> > > +++ b/app/test-crypto-perf/cperf_options_parsing.c
> > > @@ -1341,6 +1341,14 @@ cperf_options_check(struct cperf_options
> > > *options)
> > >  		}
> > >  	}
> > >
> > > +	if (options->test == CPERF_TEST_TYPE_THROUGHPUT &&
> > > +	    (options->aead_op == RTE_CRYPTO_AEAD_OP_DECRYPT ||
> > > +	     options->auth_op == RTE_CRYPTO_AUTH_OP_VERIFY) &&
> > > +	    !options->out_of_place) {
> > > +		RTE_LOG(ERR, USER1, "Only out-of-place is allowed in
> > > throughput decryption.\n");
> > > +		return -EINVAL;
> > > +	}
> >
> > Not totally following some of this, why do we only want to add this for OOP
> > mode?
> >
> > For example an inplace command I can use before this patch but not after:
> > ./build/app/dpdk-test-crypto-perf -l 2,3 -- --ptest throughput --optype aead --
> > aead-algo aes-gcm --aead-op decrypt --devtype crypto_qat --aead-key-sz 16
> >
> > I get an error;
> > USER1: Only out-of-place is allowed in throughput decryption.
> > USER1: Checking one or more user options failed
> >
> > Do we want to always force the user to use OOP + test vector file for these
> > throughput decryption tests?
> > Or should we just add a warning that the throughput may not be reflecting the
> > "success" verify path in PMD if using inplace and the dummy data.
> >
> > I am not sure.
> > If we do want to add the limitation on the throughput tests, these changes I
> think
> > are ok for that.
> >
> > Thanks,
> > Ciara
> >
> > > +
> > >  	if (options->op_type == CPERF_CIPHER_ONLY ||
> > >  			options->op_type == CPERF_CIPHER_THEN_AUTH ||
> > >  			options->op_type == CPERF_AUTH_THEN_CIPHER) { diff
> > > --git a/app/test-crypto-perf/cperf_test_throughput.c b/app/test-crypto-
> > > perf/cperf_test_throughput.c
> > > index e3d266d7a4..b347baa913 100644
> > > --- a/app/test-crypto-perf/cperf_test_throughput.c
> > > +++ b/app/test-crypto-perf/cperf_test_throughput.c
> > > @@ -99,6 +99,26 @@ cperf_throughput_test_constructor(struct
> rte_mempool
> > > *sess_mp,
> > >  	return NULL;
> > >  }
> > >
> > > +static void
> > > +cperf_verify_init_ops(struct rte_mempool *mp __rte_unused,
> > > +		      void *opaque_arg,
> > > +		      void *obj,
> > > +		      __rte_unused unsigned int i)
> > > +{
> > > +	uint16_t iv_offset = sizeof(struct rte_crypto_op) +
> > > +		sizeof(struct rte_crypto_sym_op);
> > > +	uint32_t imix_idx = 0;
> > > +	struct cperf_throughput_ctx *ctx = opaque_arg;
> > > +	struct rte_crypto_op *op = obj;
> > > +
> > > +	(ctx->populate_ops)(&op, ctx->src_buf_offset,
> > > +			ctx->dst_buf_offset,
> > > +			1, ctx->sess, ctx->options,
> > > +			ctx->test_vector, iv_offset, &imix_idx, NULL);
> > > +
> > > +	cperf_mbuf_set(op->sym->m_src, ctx->options, ctx->test_vector); }
> > > +
> > >  int
> > >  cperf_throughput_test_runner(void *test_ctx)  { @@ -144,6 +164,9 @@
> > > cperf_throughput_test_runner(void *test_ctx)
> > >  	uint16_t iv_offset = sizeof(struct rte_crypto_op) +
> > >  		sizeof(struct rte_crypto_sym_op);
> > >
> > > +	if (ctx->options->out_of_place)
> > > +		rte_mempool_obj_iter(ctx->pool, cperf_verify_init_ops, (void
> > > *)ctx);
> > > +
> > >  	while (test_burst_size <= ctx->options->max_burst_size) {
> > >  		uint64_t ops_enqd = 0, ops_enqd_total = 0, ops_enqd_failed =
> > > 0;
> > >  		uint64_t ops_deqd = 0, ops_deqd_total = 0, ops_deqd_failed =
> > > 0; @@ -176,11 +199,12 @@ cperf_throughput_test_runner(void *test_ctx)
> > >  			}
> > >
> > >  			/* Setup crypto op, attach mbuf etc */
> > > -			(ctx->populate_ops)(ops, ctx->src_buf_offset,
> > > -					ctx->dst_buf_offset,
> > > -					ops_needed, ctx->sess,
> > > -					ctx->options, ctx->test_vector,
> > > -					iv_offset, &imix_idx, &tsc_start);
> > > +			if (!ctx->options->out_of_place)
> > > +				(ctx->populate_ops)(ops, ctx->src_buf_offset,
> > > +						ctx->dst_buf_offset,
> > > +						ops_needed, ctx->sess,
> > > +						ctx->options, ctx->test_vector,
> > > +						iv_offset, &imix_idx,
> > > &tsc_start);
> > >
> > >  			/**
> > >  			 * When ops_needed is smaller than ops_enqd, the
> > > --
> > > 2.34.1