[PATCH v3 11/16] net/nbl: add nbl ethdev configuration
dimon.zhao
dimon.zhao at nebula-matrix.com
Fri Jun 27 03:40:17 CEST 2025
NBL device add ethdev configuration
Signed-off-by: dimon.zhao <dimon.zhao at nebula-matrix.com>
---
drivers/net/nbl/nbl_dev/nbl_dev.c | 33 +++++++++++++++++++++--
drivers/net/nbl/nbl_include/nbl_include.h | 3 ++-
2 files changed, 33 insertions(+), 3 deletions(-)
diff --git a/drivers/net/nbl/nbl_dev/nbl_dev.c b/drivers/net/nbl/nbl_dev/nbl_dev.c
index f02ed7f94e..4eea07c1ff 100644
--- a/drivers/net/nbl/nbl_dev/nbl_dev.c
+++ b/drivers/net/nbl/nbl_dev/nbl_dev.c
@@ -4,15 +4,44 @@
#include "nbl_dev.h"
-static int nbl_dev_configure(struct rte_eth_dev *eth_dev)
+static int nbl_dev_port_configure(struct nbl_adapter *adapter)
{
- RTE_SET_USED(eth_dev);
+ adapter->state = NBL_ETHDEV_CONFIGURED;
+
return 0;
}
+static int nbl_dev_configure(struct rte_eth_dev *eth_dev)
+{
+ struct rte_eth_dev_data *dev_data = eth_dev->data;
+ struct nbl_adapter *adapter = ETH_DEV_TO_NBL_DEV_PF_PRIV(eth_dev);
+ int ret;
+
+ NBL_LOG(INFO, "Begin to configure the device, state: %d", adapter->state);
+
+ if (dev_data == NULL || adapter == NULL)
+ return -EINVAL;
+
+ dev_data->dev_conf.intr_conf.lsc = 0;
+
+ switch (adapter->state) {
+ case NBL_ETHDEV_CONFIGURED:
+ case NBL_ETHDEV_INITIALIZED:
+ ret = nbl_dev_port_configure(adapter);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ NBL_LOG(INFO, "configure the device done %d", ret);
+ return ret;
+}
+
static int nbl_dev_port_start(struct rte_eth_dev *eth_dev)
{
RTE_SET_USED(eth_dev);
+
return 0;
}
diff --git a/drivers/net/nbl/nbl_include/nbl_include.h b/drivers/net/nbl/nbl_include/nbl_include.h
index 2f5e426c91..33b2c25684 100644
--- a/drivers/net/nbl/nbl_include/nbl_include.h
+++ b/drivers/net/nbl/nbl_include/nbl_include.h
@@ -131,9 +131,10 @@ struct nbl_common_info {
/* curr_network 0 means kernel network, 1 means user network */
u8 curr_network:1;
u8 is_vf:1;
+ u8 pf_start:1;
u8 specific_dma:1;
u8 dma_set_msb:1;
- u8 rsv:3;
+ u8 rsv:2;
struct nbl_board_port_info board_info;
};
--
2.34.1
More information about the dev
mailing list