[PATCH 27/40] crypto/cnxk: tls post process
Tejasree Kondoj
ktejasree at marvell.com
Fri May 23 15:50:58 CEST 2025
From: Vidya Sagar Velumuri <vvelumuri at marvell.com>
Add tls post process
Signed-off-by: Vidya Sagar Velumuri <vvelumuri at marvell.com>
---
drivers/crypto/cnxk/cn20k_cryptodev_ops.c | 160 ++++++++++++++++++++++
1 file changed, 160 insertions(+)
diff --git a/drivers/crypto/cnxk/cn20k_cryptodev_ops.c b/drivers/crypto/cnxk/cn20k_cryptodev_ops.c
index cdca1f4a24..92e4bce32e 100644
--- a/drivers/crypto/cnxk/cn20k_cryptodev_ops.c
+++ b/drivers/crypto/cnxk/cn20k_cryptodev_ops.c
@@ -317,6 +317,164 @@ cn20k_cpt_ipsec_post_process(struct rte_crypto_op *cop, struct cpt_cn20k_res_s *
mbuf->pkt_len = m_len;
}
+static inline void
+cn20k_cpt_tls12_trim_mac(struct rte_crypto_op *cop, struct cpt_cn20k_res_s *res, uint8_t mac_len)
+{
+ struct rte_mbuf *mac_prev_seg = NULL, *mac_seg = NULL, *seg;
+ uint32_t pad_len, trim_len, mac_offset, pad_offset;
+ struct rte_mbuf *mbuf = cop->sym->m_src;
+ uint16_t m_len = res->rlen;
+ uint32_t i, nb_segs = 1;
+ uint8_t pad_res = 0;
+ uint8_t pad_val;
+
+ pad_val = ((res->spi >> 16) & 0xff);
+ pad_len = pad_val + 1;
+ trim_len = pad_len + mac_len;
+ mac_offset = m_len - trim_len;
+ pad_offset = mac_offset + mac_len;
+
+ /* Handle Direct Mode */
+ if (mbuf->next == NULL) {
+ uint8_t *ptr = rte_pktmbuf_mtod_offset(mbuf, uint8_t *, pad_offset);
+
+ for (i = 0; i < pad_len; i++)
+ pad_res |= ptr[i] ^ pad_val;
+
+ if (pad_res) {
+ cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ cop->aux_flags = res->uc_compcode;
+ }
+ mbuf->pkt_len = m_len - trim_len;
+ mbuf->data_len = m_len - trim_len;
+
+ return;
+ }
+
+ /* Handle SG mode */
+ seg = mbuf;
+ while (mac_offset >= seg->data_len) {
+ mac_offset -= seg->data_len;
+ mac_prev_seg = seg;
+ seg = seg->next;
+ nb_segs++;
+ }
+ mac_seg = seg;
+
+ pad_offset = mac_offset + mac_len;
+ while (pad_offset >= seg->data_len) {
+ pad_offset -= seg->data_len;
+ seg = seg->next;
+ }
+
+ while (pad_len != 0) {
+ uint8_t *ptr = rte_pktmbuf_mtod_offset(seg, uint8_t *, pad_offset);
+ uint8_t len = RTE_MIN(seg->data_len - pad_offset, pad_len);
+
+ for (i = 0; i < len; i++)
+ pad_res |= ptr[i] ^ pad_val;
+
+ pad_offset = 0;
+ pad_len -= len;
+ seg = seg->next;
+ }
+
+ if (pad_res) {
+ cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ cop->aux_flags = res->uc_compcode;
+ }
+
+ mbuf->pkt_len = m_len - trim_len;
+ if (mac_offset) {
+ rte_pktmbuf_free(mac_seg->next);
+ mac_seg->next = NULL;
+ mac_seg->data_len = mac_offset;
+ mbuf->nb_segs = nb_segs;
+ } else {
+ rte_pktmbuf_free(mac_seg);
+ mac_prev_seg->next = NULL;
+ mbuf->nb_segs = nb_segs - 1;
+ }
+}
+
+/* TLS-1.3:
+ * Read from last until a non-zero value is encountered.
+ * Return the non zero value as the content type.
+ * Remove the MAC and content type and padding bytes.
+ */
+static inline void
+cn20k_cpt_tls13_trim_mac(struct rte_crypto_op *cop, struct cpt_cn20k_res_s *res)
+{
+ struct rte_mbuf *mbuf = cop->sym->m_src;
+ struct rte_mbuf *seg = mbuf;
+ uint16_t m_len = res->rlen;
+ uint8_t *ptr, type = 0x0;
+ int len, i, nb_segs = 1;
+
+ while (m_len && !type) {
+ len = m_len;
+ seg = mbuf;
+
+ /* get the last seg */
+ while (len > seg->data_len) {
+ len -= seg->data_len;
+ seg = seg->next;
+ nb_segs++;
+ }
+
+ /* walkthrough from last until a non zero value is found */
+ ptr = rte_pktmbuf_mtod(seg, uint8_t *);
+ i = len;
+ while (i && (ptr[--i] == 0))
+ ;
+
+ type = ptr[i];
+ m_len -= len;
+ }
+
+ if (type) {
+ cop->param1.tls_record.content_type = type;
+ mbuf->pkt_len = m_len + i;
+ mbuf->nb_segs = nb_segs;
+ seg->data_len = i;
+ rte_pktmbuf_free(seg->next);
+ seg->next = NULL;
+ } else {
+ cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ }
+}
+
+static inline void
+cn20k_cpt_tls_post_process(struct rte_crypto_op *cop, struct cpt_cn20k_res_s *res,
+ struct cn20k_sec_session *sess)
+{
+ struct cn20k_tls_opt tls_opt = sess->tls_opt;
+ struct rte_mbuf *mbuf = cop->sym->m_src;
+ uint16_t m_len = res->rlen;
+
+ if (!res->uc_compcode) {
+ if (mbuf->next == NULL)
+ mbuf->data_len = m_len;
+ mbuf->pkt_len = m_len;
+ cop->param1.tls_record.content_type = (res->spi >> 24) & 0xff;
+ return;
+ }
+
+ /* Any error other than post process */
+ if (res->uc_compcode != ROC_SE_ERR_SSL_POST_PROCESS) {
+ cop->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ cop->aux_flags = res->uc_compcode;
+ plt_err("crypto op failed with UC compcode: 0x%x", res->uc_compcode);
+ return;
+ }
+
+ /* Extra padding scenario: Verify padding. Remove padding and MAC */
+ if (tls_opt.tls_ver != RTE_SECURITY_VERSION_TLS_1_3)
+ cn20k_cpt_tls12_trim_mac(cop, res, (uint8_t)tls_opt.mac_len);
+ else
+ cn20k_cpt_tls13_trim_mac(cop, res);
+}
+
static inline void
cn20k_cpt_sec_post_process(struct rte_crypto_op *cop, struct cpt_cn20k_res_s *res)
{
@@ -326,6 +484,8 @@ cn20k_cpt_sec_post_process(struct rte_crypto_op *cop, struct cpt_cn20k_res_s *re
sess = sym_op->session;
if (sess->proto == RTE_SECURITY_PROTOCOL_IPSEC)
cn20k_cpt_ipsec_post_process(cop, res);
+ else if (sess->proto == RTE_SECURITY_PROTOCOL_TLS_RECORD)
+ cn20k_cpt_tls_post_process(cop, res, sess);
}
static inline void
--
2.25.1
More information about the dev
mailing list