[PATCH v2 1/1] doc/ice: document protocol agnostic filtering

[Bruce Richardson]

On Thu, Nov 13, 2025 at 10:55:48AM +0100, Burakov, Anatoly wrote:
> On 11/12/2025 6:04 PM, Bruce Richardson wrote:
> > On Wed, Nov 12, 2025 at 11:34:12AM +0000, Anatoly Burakov wrote:
> > > Current documentation for protocol agnostic filtering for ICE driver is a
> > > bit terse and relies on a lot of assumed knowledge. Document the feature
> > > better and make all of the assumptions explicit.
> > > 
> > > Signed-off-by: Anatoly Burakov <anatoly.burakov at intel.com>
> > > Acked-by: Vladimir Medvedkin <vladimir.medvedkin at intel.com>
> > > ---
> 
> 
> > > +
> > > +.. code-block:: console
> > > +
> > > +   python3 flow_parse.py --show -p "mac()/ipv4(src=1.1.1.1,dst=2.2.2.2)/udp()"
> > > +
> > > +Output:
> > > +
> > > +   {'flow': {'generic': {'pattern': {'spec': b'00000000000100000000000208004500001c000000000011000001010101020202020000000000080000',
> > > +   'mask': b'0000000000000000000000000000000000000000000000000000ffffffffffffffff0000000000000000'}}}}
> > > +
> > 
> > This looks like it should have a code-block tag on it too. Was that a
> > deliberate omission? If it should be there, I'll add it on apply.
> > 
> 
> <snip>
> 
> > > +
> > > +Spec (packet template):
> > > +  000000000001              Destination MAC (6 bytes)
> > > +  000000000002              Source MAC (6 bytes)
> > > +  0800                      EtherType = IPv4
> > > +  4500001c0000000000110000  IPv4 header, protocol = UDP
> > > +  01010101                  Source IP = 1.1.1.1
> > > +  02020202                  Destination IP = 2.2.2.2
> > > +  0000000000080000          UDP header
> > > +
> > 
> > The format of the output in the HTML here is not as above. Again, should
> > this have a code-block tag on it?
> 
> Yes on both, they were meant to be monospace formatted (not necessarily a
> *code* block but a monospaced block at least).
> 
> > 
Fixed on apply. Patch now on dpdk-next-net-intel.

Thanks,
/Bruce