[PATCH v1 1/2] net/i40e/base: add get wake packet AQ command

[Anatoly Burakov]

From: Oleg Akhrem <oleg.akhrem at intel.com>

Add definitions for the Get Wake Packet Admin Queue command
(opcode 0x0122), which retrieves the firmware-saved packet that
caused a Wake Up event.

Define the command opcode, the command descriptor and the maximum
response buffer size.

Signed-off-by: Oleg Akhrem <oleg.akhrem at intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov at intel.com>
---
 drivers/net/intel/i40e/base/i40e_adminq_cmd.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/intel/i40e/base/i40e_adminq_cmd.h b/drivers/net/intel/i40e/base/i40e_adminq_cmd.h
index eda19ccf32..d41a6d592a 100644
--- a/drivers/net/intel/i40e/base/i40e_adminq_cmd.h
+++ b/drivers/net/intel/i40e/base/i40e_adminq_cmd.h
@@ -138,6 +138,7 @@ enum i40e_admin_queue_opc {
 	/* WoL commands */
 	i40e_aqc_opc_set_wol_filter	= 0x0120,
 	i40e_aqc_opc_get_wake_reason	= 0x0121,
+	i40e_aqc_opc_get_wake_packet	= 0x0122,
 	i40e_aqc_opc_clear_all_wol_filters = 0x025E,
 
 	/* internal switch commands */
@@ -629,6 +630,17 @@ struct i40e_aqc_get_wake_reason_completion {
 
 I40E_CHECK_CMD_LENGTH(i40e_aqc_get_wake_reason_completion);
 
+/* Get Wake Packet (0x0122) */
+#define I40E_AQC_GET_WAKE_PACKET_BUFFER_SIZE	0x600
+
+struct i40e_aqc_get_wake_packet {
+	u8 reserved[8];
+	__le32 address_high;
+	__le32 address_low;
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_get_wake_packet);
+
 /* Switch configuration commands (0x02xx) */
 
 /* Used by many indirect commands that only pass an seid and a buffer in the
-- 
2.52.0